Nova Pro Scala H186 Drawer Member Set with 154lb Capacity, Full Extension, Soft-Closing, 7-5/16", Stone, 22

Nova Pro Scala H186 Drawer Member Set For Deep Drawers

Nova Pro Scala H186 drawer member set provides a slim, deep drawer side that supports high front heights up to 780 mm, so tall fronts stay guided over the full extension and feel controlled under load. The 154lb dynamic load capacity lets the drawer carry heavy contents while the slide system maintains performance along the full travel. Full extension access lets the drawer clear the cabinet, so the entire interior depth is available for use without reaching past the front. The soft-closing damping system slows the last part of travel, which helps doors and fronts settle into the cabinet quietly. Integrated height, side, and tilt adjustment in the runner system allows precise front alignment, which matters when lining up multiple fronts or correcting minor carcass variation. This set belongs to the Grass Nova Pro Scala drawer system range from Grass America.

Key Nova Pro Scala Details For Cabinet Projects

• The slim, deep drawer side design creates usable internal space while keeping side walls narrow, which helps when fitting organizers or maximizing storage depth inside the Grass Nova Pro Scala drawer system.
• High stability up to a front height of 780 mm (30-11/16") supports tall drawer fronts, so high-faced pull-outs track consistently without racking, helping multi-drawer stacks stay visually aligned.
• Full extension travel exposes the complete drawer length, so contents at the back remain accessible, which is useful in deeper bases where rear storage is otherwise hard to reach.
• The soft-close damping system slows closing motion near the cabinet, so the front settles gently, helping protect fronts and minimizing impact on the slide mechanism during repeated use.
• Integrated height, side, and tilt adjustment lets the installer tune the front position on the cabinet, which helps create even reveals and compensate for small dimensional variances in the casework.
• Compatibility with Tipmatic Soft-close means the runner can work in projects that use that opening and closing solution, supporting consistent operation across matching drawer runs.

Installation And Adjustment For Nova Pro Scala H186

The Nova Pro Scala H186 drawer member set uses integrated height, side, and tilt adjustment on the runner, giving three-way fine-tuning of the drawer front once installed. This adjustment range helps correct minor case twist or out-of-square openings without reworking the cabinet. The full extension slide design supports 22 inch (550 mm) drawer depth, so cabinets can be planned around that length during layout. Tool-free drawer front removal and installation simplify fitting and later adjustments, because the front can be detached, adjusted, and reinstalled without separate tools. Available dynamic load capacities of 88 lb (40kg) and 154 lb (70kg) let the drawer configuration match the expected contents weight while maintaining the same Nova Pro Scala installation concept.

Using This Grass Nova Pro Scala Drawer Member Set

Where The Nova Pro Scala H186 Fits Best

The Nova Pro Scala H186 drawer member set is part of the Grass Nova Pro Scala drawer system, so it suits cabinet work designed around that system. The 22 inch (550 mm) specification aligns with common base cabinet depths, giving straightforward integration into kitchen, bath, or shop layouts that use that depth standard. The slim, deep drawer side supports tall fronts up to 780 mm (30-11/16"), making it suitable for high-front drawers, such as deep base storage or tall pull-outs where extra panel height is needed. With available load capacities at 88 lb (40kg) and 154 lb (70kg), the same basic runner concept can be used from lighter utility drawers up through heavier storage zones, maintaining a consistent look and feel across a cabinet run. The stone color finish supports designs that call for that specific appearance within the Grass Nova Pro Scala range.

Why The Nova Pro Scala Details Support Repeatable Results

The fully-synchronized slide technology coordinates both drawer members, so movement stays smooth across the full extension, which supports accurate front gaps when drawers are opened or closed together. Integrated height, side, and tilt adjustment means installers can dial in front alignment at three points, which reduces rework when cabinet openings vary slightly. Tool-free drawer front removal and installation streamline on-site fitting, because fronts can be quickly detached to access the runner or adjust clearances, then reinstalled at the same setting. The soft-closing damping system works with this synchronized action to manage closing speed, which supports consistent operation across a bank of drawers. Compatibility with Tipmatic Soft-close lets projects using that system specify this drawer member set while retaining push-activation behavior. The high stability noted for tall fronts helps maintain alignment over time when drawers are loaded near the rated 154lb dynamic capacity.

Common Questions About Nova Pro Scala H186 Use

Selecting This Nova Pro Scala Set For Your Build

The Nova Pro Scala H186 drawer member set with 22 inch (550 mm) length, full extension, and soft-closing damping aligns well with cabinets using the Grass Nova Pro Scala drawer system. The 154lb dynamic capacity and tall-front stability up to 780 mm support heavier, higher drawers in one solution. Integrated height, side, and tilt adjustment, together with tool-free front removal, simplify alignment work during installation and later fitting. For projects built around Grass America hardware, this set provides a defined combination of depth, motion, and adjustment within the Nova Pro Scala range.