Nova Pro Scala H63 Drawer Member Set with 154lb Capacity, Full Extension, Soft-Closing, 2-1/2", Silver, 18

Nova Pro Scala H63 Drawer Member Set For Tight Spaces

Nova Pro Scala H63 drawer member set with 154lb capacity, full extension, soft-closing, 2-1/2 inch, silver, 18 inches is designed as an extremely shallow drawer for limited heights, so you can gain storage where standard drawer heights will not fit. As part of the Grass Nova Pro Scala drawer system, this member set supports full-extension travel, giving clear access from front to back for loading, organizing, and cleaning. The soft-close damping system slows the final travel, so drawer fronts contact the cabinet quietly and predictably on every cycle. Available dynamic load capacities of 88 lb (40kg) and 154 lb (70kg) are designed to support both lighter utility drawers and heavier-use storage in the same system. The silver finish identifies the slide visually inside the cabinet run and matches other Nova Pro Scala components for a consistent installation.

Key Nova Pro Scala Details That Save Time

• The drawer member set is described as extremely shallow for limited heights, so it can be used where plumbing, appliances, or structural members restrict vertical space, turning otherwise unusable cavities into functional drawers.
• Full extension for maximum access to drawer contents lets the drawer clear the cabinet face, which simplifies fitting organizers, checking clearances, and reaching items at the very back without reworking the cabinet layout.
• Integrated height and side adjustment are built into the system, letting you fine-tune the drawer front position after mounting to align reveals, correct minor racking, and match adjacent fronts without slotting cabinet holes.
• Soft-close damping system is built into the slide, so the drawer decelerates on its own at the end of travel, which reduces impact on the cabinet, helps fronts stay aligned over time, and creates a consistent closing feel.
• The system lists available load capacities of 88 lb (40kg) and 154 lb (70kg) dynamic, allowing you to design runs where light and heavy drawers share the same slide family, keeping drilling patterns and adjustment behavior consistent.

Drawer Member Fit, Height, And Extension Behavior

The 2-1/2 inch height description identifies this Nova Pro Scala H63 drawer member set as a low-profile option, so it occupies minimal vertical space while still supporting the drawer box. The 18 inch (450mm) length defines the runner travel, so case depths and drawer box dimensions can be coordinated around full-extension movement. Fully-synchronized slide technology keeps both runners moving together, which helps the drawer track straight even when loads shift to one side. Integrated height and side adjustment mean that once the members are mounted in the cabinet, you can bring the fronts into plane using the built-in mechanisms instead of redrilling. The soft-close damping system engages at the end of stroke, so the last portion of closing is controlled rather than free-slamming.

Using Nova Pro Scala H63 In Real Installations

Extremely Shallow Drawer Layouts For Limited Heights

The product description states this is an extremely shallow drawer for limited heights, so it suits toe-kick zones, sink bases, and tight overhead cabinets where traditional drawer heights would interfere with obstacles. The 2-1/2 inch height callout gives you a predictable profile when stacking multiple drawers vertically, which helps when spacing fronts and planning face-frame or frameless reveals. With an 18 inch (450mm) length, this Nova Pro Scala H63 drawer member set serves standard-depth carcasses, so you can use it in typical kitchen and bath layouts without changing your box construction. As part of the Grass Nova Pro Scala drawer system, it works within that family of components, so a run can mix this shallow drawer above deeper storage while retaining a uniform slide platform.

Adjustment, Soft Closing, And System Performance

Integrated height and side adjustment are described as part of this drawer member set, which lets you correct small case tolerances and bring fronts into alignment after installation, saving time compared with moving cabinet hardware. Fully-synchronized slide technology coordinates both runners, so the drawer opens and closes smoothly even when users load one side more heavily, which helps reduce binding and wear at the front. Full extension for maximum access to drawer contents means the drawer clears the opening, allowing accurate fitting of inserts, clearances for plumbing, and easy access for end users. The soft-close damping system manages the last part of the stroke, so drawers close with a controlled motion that reduces shock to joints and maintains a consistent closing feel across the installation. Compatibility with Tipmatic Soft-close allows projects that use mechanical push-to-open with soft closing within the same platform, supporting different opening functions while keeping the slide family consistent.

Common Nova Pro Scala H63 Drawer Questions Answered

Choose This Nova Pro Scala Set For Tight Drawer Runs

The Nova Pro Scala H63 drawer member set with 154lb capacity, full extension, soft-closing, 2-1/2 inch, silver, 18 inches pairs an extremely shallow drawer design with fully-synchronized slide technology, integrated height and side adjustment, and soft-close damping. Those details support low-height cabinet zones while keeping access, alignment, and motion consistent with other Grass Nova Pro Scala drawers. For cabinet runs that demand shallow profiles without giving up full-extension travel or controlled closing, this member set provides a defined height and length to design around.