Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf utility drawer insert gives base cabinet drawers a dedicated place for kitchen tools, cutlery, and knives. This Rev-A-Shelf drawer insert is a maple cutlery drawer insert made for 36 inch or smaller base cabinet drawers, and it installs as a drop-in drawer insert for straightforward setup. The wood utility knife block insert design can be trimmed to fit an existing drawer, which helps when drawer interiors vary slightly from cabinet to cabinet. Natural maple construction with a semi-gloss finish gives the insert a clean wood look that suits many kitchen drawer interiors. This utility and cutlery drawer insert is TSCA Title VI compliant and sold as an individual unit.
Key specs to confirm: This drawer insert is listed at 33-1/8 inches wide, 22 inches deep, and 2-7/8 inches high. The product is designed for 36 inch or smaller base cabinet drawers and is intended as a trim-to-fit insert for existing drawers. Before ordering, measure the inside width, inside depth, and usable drawer height, then compare those dimensions to the insert and to any drawer hardware that may reduce clear space. If you need exact compartment sizing, knife slot details, or installation tolerances, those details should be confirmed with the manufacturer or technical documentation. Any additional compliance or safety details beyond TSCA Title VI should also be confirmed there.
What's included: One Rev-A-Shelf 4WUTKB Series maple utility and cutlery drawer insert, sold as each.
What to verify before ordering: Confirm your drawer is a base cabinet drawer, confirm the interior can accept a 33-1/8 inch wide by 22 inch deep insert after trimming as needed, confirm the 2-7/8 inch height clears the drawer box and stored items, and confirm your planned use for cutlery, utility tools, and knives matches the insert layout. Follow manufacturer installation guidance and local building requirements where applicable.
A wood utility knife block insert is often chosen when a kitchen drawer has become a mixed storage area for loose utensils, prep tools, and knives. In that situation, items slide, overlap, and take longer to find. This Rev-A-Shelf utility drawer insert is built for that practical use case. It is a utility and cutlery drawer insert made for base cabinet drawers, so it fits the kind of drawer many kitchens already use for flatware and hand tools.
The trim-to-fit drawer insert format matters when the drawer opening is close to standard size but not exact. Many professionals and serious DIY buyers work with existing drawer boxes, not brand-new cabinetry. A trim-to-fit maple cutlery drawer insert gives them flexibility while still starting from a defined overall size of 33-1/8 inches wide, 22 inches deep, and 2-7/8 inches high. The drop-in drawer insert installation style also helps reduce setup time because the insert is designed to sit inside the drawer rather than requiring a more involved built-in organizer approach.
Natural maple construction is another practical point for buyers who want a wood organizer instead of plastic trays. Maple is commonly selected for cabinet accessories because it suits many drawer interiors and shop projects. The semi-gloss finish gives the insert a finished appearance for drawers that are opened often in front of clients, family members, or guests. For remodel work, that can matter as much as storage function.
This drawer insert for base cabinet drawers is described for 36 inch or smaller cabinet drawers, but buyers should still verify the actual inside dimensions of the drawer box before purchase. Existing slides, side walls, and drawer joinery can reduce usable room. If the exact knife block slot count, compartment layout, or trimming limits are important for your project, those points should be confirmed before ordering. That step helps avoid ordering an insert that fits the drawer shell but not the intended storage plan.
When comparing drawer organizers in general, buyers usually look at material, fit method, installation style, and whether the organizer is meant for one storage task or several. This Rev-A-Shelf drawer insert stands out through verified, straightforward details: it is a maple drawer organizer, it is intended for utility and cutlery use, it is made for 36 inch or smaller base cabinet drawers, and it uses a drop-in format with trim-to-fit capability.
Those points matter because some inserts are fixed-size only, while others are more adaptable to existing cabinetry. A trim-to-fit drawer insert can be a better match when the drawer is already built and the goal is to improve organization without rebuilding the drawer box. A drop-in drawer insert can also be easier to plan around because the installer can measure the interior, confirm clearances, and set the insert in place after any needed trimming.
Material also affects buying decisions. A natural maple insert with a semi-gloss finish gives a wood look that aligns with many cabinet accessory packages. Buyers who want a coordinated interior often prefer that over mixed materials. Brand consistency can matter too. Rev-A-Shelf is identified here as the manufacturer and brand, which helps buyers match this insert to other cabinet accessories from the same source when they want a uniform approach across multiple drawers.
For a careful comparison, focus on verified dimensions, intended cabinet size, and whether the insert is sold individually. Then confirm any project-specific details not listed in the product data, such as exact compartment measurements or trim allowances, before finalizing the order.
This Rev-A-Shelf utility drawer insert is designed for 36 inch or smaller base cabinet drawers, but the actual inside drawer dimensions should be measured before ordering.
This trim-to-fit drawer insert is described as made to fit an existing drawer, so buyers should confirm the needed final dimensions before installation.
This drop-in drawer insert is made for drop-in installation inside an existing drawer.
This Rev-A-Shelf drawer insert is listed at 33-1/8 inches wide, 22 inches deep, and 2-7/8 inches high.
This utility and cutlery drawer insert is made from natural maple with a semi-gloss finish.
This Rev-A-Shelf 4WUTKB Series insert is packed and sold as each.
This drawer insert requires checking inside width, inside depth, usable height, and any slide or hardware obstructions inside the drawer box.
This maple drawer organizer is listed as TSCA Title VI compliant. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf drawer insert works best when the drawer opening, interior depth, and usable height are checked before purchase. This maple cutlery drawer insert is sold as one unit and is intended for 36 inch or smaller base cabinet drawers with drop-in installation. Before ordering, confirm the 33-1/8 inch width, 22 inch depth, and 2-7/8 inch height against your actual drawer interior, and verify that the trim-to-fit format and utility-and-cutlery layout match how the drawer will be used.
Sold In: 1 Each
