Vauth-Sagel COR Wheel PRO 26-3/4" D x 24-3/8" H Carbon Steel Gray Kidney Lazy Susan, Independently Rotating 2 Shelves - 90009095

Vauth-Sagel COR Wheel PRO Lazy Susan Storage

Vauth-Sagel COR Wheel PRO lazy susan is a poleless kidney-shaped corner cabinet organizer with independently rotating 2 shelves that turns dead corner space into accessible storage. The poleless design creates 20% more storage space compared to a design with a pole, so more items can be arranged on each shelf without changing the cabinet footprint. The unit has a diameter of 26-3/4 inches and a height of 24-3/8 inches, which suits many standard corner cabinet layouts where vertical clearance is limited. Minimum side installation depth of 19.29 inches allows the trays to sweep the cabinet interior while maintaining clearance at the opening. Each shelf supports a maximum load capacity of 60 lb, helping the trays handle heavier pantry items while rotating smoothly inside the cabinet.

Key COR Wheel PRO Details For Cabinet Projects

• The independently rotating 2 shelves let each tray turn on its own, so front and back items in a corner cabinet can be reached without shifting everything on the other level, which streamlines daily use and restocking.
• The poleless design with 20% more storage space compared to a design with a pole frees the central area of the trays, giving more uninterrupted surface for larger pots or stacked goods inside the same cabinet opening.
• The 26-3/4 inch diameter and 24-3/8 inch height establish a defined footprint, which helps plan corner cabinet layout when balancing clearance with nearby drawers, doors, or interior dividers.
• The minimum side installation depth of 19.29 inches indicates how far the cabinet interior must extend from the door opening, so the kidney-shaped trays can rotate fully without interference from the face frame or door.
• The maximum 60 lb per shelf load capacity supports heavier stored items, which matters when organizing canned goods or cookware so that the rotating function stays consistent under real kitchen loads.
• The carbon steel gray frame and tray bottom finish present a uniform appearance, which helps the interior of the cabinet look finished and coordinated with contemporary gray-focused kitchen hardware.

Installation And Fit Details For COR Wheel PRO

The COR Wheel PRO lazy susan uses a poleless frame that mounts to the cabinet, so the trays connect to supporting arms rather than a center post, opening up the center area for storage. Its minimum height requirement of 24.375 inches defines the vertical opening needed inside the corner cabinet to accommodate the full frame and tray rotation. Minimum side installation depth of 19.29 inches reflects how much cabinet interior is required from the inside of the door to the back, guiding layout decisions in L-shaped or blind-corner configurations. Easy br Fit tool-free installation of storage units onto the supporting arms lets the trays snap into place on the frame without separate fastening steps, which can save time when adjusting tray height or during retrofit work in an existing cabinet run.

Using COR Wheel PRO In Corner Cabinet Upgrades

Where This Kidney Lazy Susan Works Best

This COR Wheel PRO kidney lazy susan is part of the Vauth-Sagel Planero family for kitchen corner cabinets, giving a defined solution for organizing base-cabinet corners. The kidney shape is designed to sweep the interior of a corner cabinet while leaving clearance at the door opening, so the 26-3/4 inch diameter translates into broad coverage of the cabinet floor and upper space. The 24-3/8 inch height aligns with a wide range of base cabinet interiors, so the unit can be used in many standard-height installations where vertical constraints exist under countertops. Minimum side installation depth of 19.29 inches points to cabinets with adequate depth from the face to the back corner, which is typical of many L-shaped kitchen layouts. The ability to install into an existing kitchen means the system is suited for retrofit projects, allowing aging or inefficient corner spaces to be converted into organized storage without redesigning the entire cabinet run.

Why COR Wheel PRO Details Support Repeatable Results

The independently rotating 2 shelves provide separation between upper and lower storage, so each level can be organized by item type for predictable access during daily kitchen work. The poleless design delivering 20% more storage space compared to a design with a pole helps utilize the full tray surface, which supports consistent placement of bulky items without needing to work around a center obstruction. The maximum 60 lb per shelf load capacity sets a clear performance limit, allowing planning of how many jars, cans, or small appliances occupy each tray so rotation stays consistent from kitchen to kitchen. The Easy br Fit tool-free installation of storage units onto the supporting arms reduces steps when setting tray positions, which helps installers repeat the same layout and adjustments across multiple cabinets on a job. The carbon steel gray frame and tray bottom finish create a uniform visual reference inside the cabinet, making it easy to verify tray alignment and orientation during install and future adjustments.

Common COR Wheel PRO Corner Cabinet Questions

Selecting COR Wheel PRO For Corner Cabinets

The Vauth-Sagel COR Wheel PRO 26-3/4 inch D x 24-3/8 inch H kidney lazy susan offers a poleless, independently rotating 2-shelf layout that turns corner cabinets into organized storage zones. With 20% more storage space compared to a design with a pole, a minimum side installation depth of 19.29 inches, and 60 lb per shelf capacity, it addresses both access and load demands in active kitchens. For corner cabinet projects where efficient rotation, defined clearances, and a carbon steel gray finish are priorities, this COR Wheel PRO configuration provides a focused solution ready for integration into new or existing cabinetry.