Vauth-Sagel COR Wheel PRO lazy susan turns a blind base cabinet into organized, full-circle storage using a poleless design, so every part of each round shelf can be used in daily kitchen work. The poleless design has 20% more storage space vs. a design with a pole, which opens up more room for pots, small appliances, or bulk items in the same footprint. The system uses independently rotating 2 shelves, so each tray can be turned separately to reach items without moving everything at once. The shelves are full circle lazy susans, using the full 30 inch diameter area to capture corner space that normally stays hard to access. This 2-tray kit is built around a frame that supports both trays, giving a single organized zone inside the cabinet.
The minimum height of 24.375 inches means the cabinet interior must be at least that tall from bottom to top at the mounting area, so the frame and 2 trays can be positioned without binding. The minimum side installation depth of 19.29 inches defines how far back the mounting points need to sit for the 30 inch D shelves to rotate through a full circle. The Easy br Fit tool-free installation of storage units onto the supporting arms allows the trays to be attached without separate tools, which speeds on-site work and supports quick adjustments in shelf position. The ability to be installed into an existing kitchen lets this lazy susan be used during remodels, because the frame and trays are designed to mount inside cabinets already in place.
The poleless design has 20% more storage space vs. a design with a pole, so both trays present an open surface from edge to edge that can be filled without a center obstruction. The 30 inch D dimension defines a large circular footprint, which helps cover deep corner spaces inside base cabinets. Independently rotating 2 shelves means each tray turns on its own, allowing the upper and lower levels to be positioned for different item groups while still giving direct reach to the back. The ability to be installed into an existing kitchen means the frame and trays are suited to retrofit work in occupied spaces, keeping the upgrade focused inside the cabinet. The carbon steel gray frame finish provides a neutral tone that pairs with the tray bottom finish choices, helping the interior look planned rather than improvised.
The minimum height of 24.375 inches acts as a fixed reference when planning cabinet interior clearances, reducing guesswork when aligning the frame within a run of bases. The minimum side installation depth of 19.29 inches sets a clear threshold for usable cabinet depth, helping keep the 30 inch D full circle trays from rubbing walls or door hardware. The Easy br Fit tool-free installation of storage units onto the supporting arms lets the shelves be clipped on or off during layout, which simplifies fine-tuning vertical spacing between the 2 trays. The load capacity of max. 60 lbs. per shelf gives a defined weight range for each level, supporting consistent performance across multiple installs. The tray bottom finish options in carbon steel gray and walnut give two visual outcomes from the same mechanical layout, allowing different projects to share the same frame and dimensions while presenting different interior tones.
The Vauth-Sagel COR Wheel PRO lazy susan requires a minimum height of 24.375 inches, which sets the interior space needed for the frame and both rotating trays.
The COR Wheel PRO system needs a minimum side installation depth of 19.29 inches so the 30 inch diameter full circle trays rotate without contacting cabinet walls.
Each shelf on this Vauth-Sagel lazy susan has a load capacity of max. 60 lbs., which supports heavier kitchen items within that rating.
The COR Wheel PRO lazy susan has independently rotating 2 shelves, so the upper and lower trays turn separately to access stored items on each level.
This Vauth-Sagel COR Wheel PRO system can be installed into an existing kitchen, allowing retrofit use in current base cabinets.
The frame finish is carbon steel gray, and the tray bottom finish is available in carbon steel gray and walnut to coordinate with different cabinet interiors.
The Vauth-Sagel COR Wheel PRO 30 inch D x 24-3/8 inch H carbon steel gray full circle lazy susan gives a poleless system with independently rotating 2 shelves, defined minimum dimensions, and max. 60 lbs. per shelf capacity. These fixed measurements and finishes support planning for both new cabinets and existing kitchen upgrades. When a project calls for a 2-tray lazy susan kit that uses a 30 inch diameter, this model 90009098 provides a consistent layout anchored by the stated height, depth, and load ratings.
Sold In: 1 Kit