PRO Value PRO600 Front Locking Device, Right Hand, Black, 0684250536961 120

Black 2D Front Locking Device For PRO600 Undermount Slides, Right Hand, No Flange

This is the right-hand, non-flanged front locking device for Pro Value Series PRO600 undermount drawer slides, offering 2D adjustment to fine-tune the installed drawer front in both height and side position after the drawer is hung.

Key Features

• 2D adjustment — provides height adjustment of +3mm and side adjustment of +/-1.5mm so the drawer front can be trued without removing the drawer.
• Right-hand orientation — this is a single right-hand device; pair it with the matching left-hand version to complete one drawer installation.
• No-flange design — suited to drawer boxes built without a front flange cutout, keeping the fixing clean and flush at the drawer face.
• PRO600 series specific — engineered exclusively for PRO600 undermount slides; not interchangeable with PRO560 or other series locking devices.
• Black plastic construction — low-profile and visually unobtrusive under the drawer bottom once installed.

Where This Locking Device Does Its Work

Front locking devices are the connection point between an undermount slide and the drawer box front. On PRO600 installations, every drawer needs one left-hand and one right-hand device to seat properly on the slides and hold the drawer securely during use. The non-flanged version is the right choice when the drawer box is built without a routed or rabbeted front recess — the device clips directly to the slide and grips the drawer bottom without requiring a flange pocket in the wood.

The 2D adjustment range is where this device earns its place in a production workflow. Once a drawer is hung, small gaps and misalignments at the drawer front are common. Rather than pulling the box and replaning or reshimming, the 2D locking device lets you dial in height and side position on the installed drawer, keeping the reveal consistent across a run of cabinet doors and drawers.

Material and Finish

The device is molded in black plastic, which keeps it light and corrosion-free in the dry interior of a cabinet. The black color recedes visually when visible from below the drawer, and it matches the black hardware used throughout the PRO600 undermount program. Plastic construction also means there is no risk of marring the underside of a finished drawer bottom during installation or adjustment.

Specifying the Right Device for Your Install

PRO600 locking devices are series-matched components — they are not universal fits across undermount brands or even across the Pro Value Series lineup. If the cabinet run uses PRO560 slides, the corresponding PRO560 locking devices are the correct accessory. For shops running PRO600 slides across a full kitchen or bath project, order locking devices in matched pairs: one right-hand and one left-hand device per drawer. This listing covers the right-hand device only.

The non-flanged design also means the drawer box itself does not need any special routing at the front. For shops whose drawer box process does not include a flange groove, this version simplifies construction without sacrificing adjustability.

Common Questions

Keep Every Drawer Front Dialed In

A well-fitted drawer front is the detail that separates a polished cabinet installation from one that needs a callback. The PRO600 right-hand non-flanged locking device gives you the adjustment range to get there the first time and the series-matched fit to keep the slide performing as rated.