Front Locking Devices 3D Adjustable, No Flange For PRO 600 Undermount Slides, Left, 0684250523961 120

Black 3D-Adjustable Front Locking Device for PRO 600 Undermount Slides, Left Hand

This is a left-hand, no-flange front locking device for the Pro Value Series PRO 600 undermount slide system, offering three-axis adjustment so the drawer front can be dialed in after installation. It is sold as a single left-hand unit in Black.

Key Features

• 3D adjustment in three axes — height, side, and depth can each be tuned independently after the drawer is hung, eliminating time-consuming removal and rehang cycles.
• Height adjustment of +3 mm — enough range to correct for minor cabinet-opening variation without shimming.
• Side adjustment of +/- 1.5 mm — shifts the drawer front left or right to close gaps evenly on both sides.
• Depth adjustment of +3.5 mm — moves the front in or out to flush it with the cabinet face or a neighboring door.
• No-flange design — the clip profile sits clear of the drawer bottom, suited to drawer boxes where a flanged device would interfere with the floor panel or bottom groove.
• Black plastic construction — color-matched to the PRO 600 slide hardware and hidden beneath the drawer box in use.

Where This Device Does Its Work

Front locking devices carry the drawer box on the undermount slides and connect it to the drawer front. In a PRO 600 installation, the left-hand device pairs with the matching right-hand device to complete one drawer. The no-flange profile is the right choice when the drawer box has a bottom panel that runs close to the front edge, or when the box construction leaves little clearance for a flanged clip to seat cleanly. Three-axis adjustment is most valuable in production work — a shop building multiple cabinets in sequence can hang all the drawer fronts rough and walk back through to true them up in one pass rather than correcting each box as it goes in.

Material and Finish

The device is molded in black plastic, the standard material for undermount locking clips in this load class. Plastic keeps the clip light, resists the moisture that sometimes collects under kitchen drawers, and holds its adjustment settings without creep under normal cycling loads. The Black finish matches the PRO 600 slide members so the hardware reads as a unified system under the box.

Who Should Order This

Cabinet shops running the PRO 600 undermount program will reach for this clip when they need left-hand replacements or when a box requires the no-flange profile specifically. It is also the right part for a remodel installer who finds a left-hand clip damaged or missing on an existing PRO 600 drawer. Because locking devices are system-specific, this clip is not interchangeable with devices from other undermount brands or with clips from other Pro Value Series slide programs — order the PRO 600 version and the correct hand for each side of the drawer.

Common Questions

Keep the PRO 600 System Running Clean

The right locking device, correctly handed and matched to the slide series, is what turns a hung drawer box into a finished, adjustable front — order the left-hand no-flange clip for the PRO 600 and have the right-hand version on hand to complete each drawer.