Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica J0754-FN Blu Fes laminate delivers a 51 inch by 121 inch sheet in a matte finish that lays out well on larger panels, so casework, doors, or tops can be covered with fewer seams. The laminate is specified as 0.8 mm thickness, so it works like a standard thin high-pressure laminate in common fabrication setups. The surface has low light reflectivity, which helps control glare on vertical panels or counters under strong lighting. The extremely matte surface provides a consistent look across the full sheet, which supports uniform appearance on multi-panel runs. Soft Touch Anti-Fingerprint properties help the surface handle frequent contact in busy areas, so visible smudging is reduced between cleanings. All sheets come with a peel coat protective film that shields the face during handling and fabrication, so the working surface stays protected until final removal at installation.
This Blu Fes laminate uses a 0.8 mm thickness that works smoothly with standard laminate fabrication methods, so sheet handling and bonding processes remain familiar in the shop. The 51 inch by 121 inch size lets fabricators nest parts efficiently on a single sheet, which can reduce offcut waste on medium to large components. The low light reflectivity and matte finish help finished pieces read consistently once installed under jobsite lighting, which supports predictable final results when panels from different sheets are brought together. Soft Touch Anti-Fingerprint performance maintains the visual impact of the matte surface while pieces are handled through cutting, routing, and fitting, which is useful when multiple trades are working around finished panels. The peel coat protective film stays on the face through these steps, so tooling and bench contact are kept off the decorative surface until the project is ready for turnover.
The Blu Fes surface is identified for applications such as Healthcare, Hospitality, Education, Office, Transportation, Retail, Furniture, Industrial Design, Kitchen, and Bath, so the same color and finish can run through mixed-use projects or multi-room programs. In healthcare or education, the low light reflectivity and extremely matte surface support calm, low-glare wall cladding, casework, or worktops under strong overhead lighting. In hospitality, office, or retail environments, Soft Touch Anti-Fingerprint properties help reception counters, tabletops, and vertical features retain a cleaner look between maintenance cycles. For furniture and industrial design work, the 51 inch by 121 inch sheet size allows larger components like tabletops or side panels to be cut from a single sheet, which supports clean lines without breaking the design across many joints. In kitchen and bath applications, the matte finish and anti-fingerprint surface support visual consistency on doors, drawer fronts, and vertical panels that see regular handling.
The laminate is described as BLU FES, 1.2MM FENIX and also given as 0.8 mm thickness (1/32 inch), so specifiers can reference both descriptors when aligning with existing Fenix or Formica documentation on a project. The Manufacturer Part # J0754JJFN600100 provides a precise identifier, which helps keep ordering and shop labeling consistent from takeoff through cutting. Being part of the Formica HPL category, the sheet fits into workflows already set up for high-pressure laminates, so fabricators can rely on existing presses, bonding routines, and trim tooling. The Soft Touch Anti-Fingerprint property is built into the surface, so its behavior is part of the finished face during normal service. Low light reflectivity and the extremely matte surface work together to give panels a controlled, uniform appearance when installed side by side, which is valuable on long corridors, banks of casework, or aligned feature walls that must read as a continuous field.
Formica J0754-FN Blu Fes laminate is specified as a 51 inch by 121 inch sheet, which covers larger panels or long runs with fewer seams in many casework and wall applications.
The Blu Fes laminate is given as 0.8 mm thickness, 1/32 inch, so it works like standard thin high-pressure laminate in common fabrication, trimming, and bonding workflows.
The low light reflectivity and extremely matte surface reduce glare on vertical and horizontal panels, which supports a more controlled visual appearance under strong lighting.
The Soft Touch Anti-Fingerprint surface helps limit visible smudges from handling or frequent contact, so high-use areas maintain a cleaner look between regular maintenance.
The Blu Fes laminate is noted for use in Healthcare, Hospitality, Education, Office, Transportation, Retail, Furniture, Industrial Design, Kitchen, and Bath applications across varied project types.
The peel coat protective film shields the decorative face while cutting, bonding, and handling, so the finished surface is exposed only after fabrication and installation steps are complete.
Choose Formica J0754-FN Blu Fes laminate when a 51 inch by 121 inch matte sheet with low light reflectivity and Soft Touch Anti-Fingerprint performance matches your project requirements. The 0.8 mm thickness and Formica HPL classification align with familiar fabrication methods, so panels, casework, and fixtures can be built using established shop workflows while taking full advantage of the Fenix Blu Fes color and finish across healthcare, hospitality, education, office, retail, kitchen, bath, and furniture applications.
Sold In: 1 Sheet
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 300 Lineal Ft |  WT9375-40-60262MM Mfr# 60262MM-B-1540-300 | PVC Edgebanding, Color 60262MM Piombo Doha, 1mm Thick 15/16" x 300' Roll | ||||
Sold in: 300 Lineal Ft |  WT9375-40-20440MM Mfr# 20440MM-B-1540-300 | PVC Edgebanding, Color 20440MM Blu Fes, 1mm Thick 15/16" x 300' Roll |