Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
HDS-10S-KL/WT soft-closing lid stay is a light duty, left-hand support designed for downward-opening flap doors, so it controls door motion when the front drops down instead of lifting up. It is specified for use with downward-opening flap doors, which helps you plan face-frame or frameless layouts where the door becomes a work or access surface. The product is made from white plastic and steel, giving a combination of metal strength with a neutral white housing that aligns with many cabinet interiors. As a lid support and stay, it is part of a broader lift systems and stays category, so it works as the motion-control component in a hinge-plus-stay setup rather than acting as the primary hinge. The design is light duty, which suits smaller or lighter flap doors where a compact stay is preferred.
The lid stay is described as being for use with piano, butt, or drop hinges, so it works alongside those hinge types to control motion rather than replace the main pivot. When used on a downward-opening flap door, the HDS-10S is designed to self close when the front is pushed toward the cabinet, which reduces the effort needed to bring the door back to the closed position. The same mechanism provides a soft-close action, so the door slows as it reaches the cabinet face instead of slamming, which supports a quieter installation and reduces impact on the hinges and cabinet. Because the stay is light duty and left-hand specific, it fits applications where a compact assister is needed on one side as part of a matched pair.
The lid support is in the lid supports and stays product class, so it is intended as the controlled-motion element for flap fronts rather than a general hinge. It is identified for downward-opening flap doors, which aligns with drop-front desk sections, appliance garages, or lower access doors that open down to create a work or access plane. Use with piano hinges means it can support long continuous-hinge applications across the full width of a front, giving a smooth pivot while the stay manages the movement. Use with butt or drop hinges covers more compact hinge placements, so the same stay can be integrated into different hinge layouts while keeping motion control consistent. As a left-hand unit, it is selected specifically for the left side of the opening, which helps keep hardware placement predictable on repeated cabinet runs. Because it is light duty, it matches doors sized and weighted appropriately for that range, aligning the stay with fronts that do not demand high-torque hardware.
The web description provides a torque calculation of Torque = Door Height x 1/2 x Door Weight, which ties the stay selection directly to actual door dimensions and mass so the hardware performance matches the front it supports. The K-Type torque range is 60 to 95 kgf.cm (52 to 82 lbs. inch) per pair, which defines a working band for lighter fronts where modest support is sufficient. The M-Type torque range is 95 to 130 kgf.cm (82 to 112 lbs. inch) per pair, covering somewhat heavier or taller doors that need more controlled resistance. The H-Type range is 110 to 160 kgf.cm (95 to 138 lbs. inch) per pair, allowing for fronts with higher torque loads within a light duty context. The S-Type range is 140 to 180 kgf.cm (121 to 156 lbs. inch) per pair, supporting the upper end of torque capacity specified in this series. These ranges let you align door design with a clearly defined torque band, so the stay can assist movement and soft closing without being over- or under-stressed in regular use.
The HDS-10S-KL/WT lid stay is designed for downward-opening flap doors, so it supports fronts that pivot down to open rather than lifting upward.
The HDS-10S lid stay soft closes when pushed to close, so it slows the door near the end of travel and reduces impact at the cabinet face.
This model is specified as a left-hand unit, so it is intended for mounting on the left side of a downward-opening flap door assembly.
The lid stay is stated for use with piano, butt, or drop hinges, so it pairs with those hinge types to manage controlled movement.
The stay is described as light duty, so it is suited to smaller or lighter downward-opening flap doors within the specified torque ranges.
The product is specified for use in pairs, so the published torque ranges describe two stays working together to support and control the flap door.
The HDS-10S-KL/WT soft-closing lid stay from Sugatsune America offers a left-hand, light duty solution tailored to downward-opening flap doors, so it fits projects where controlled, quiet motion matters. Defined torque calculation and clearly stated torque ranges help align the stay with door height and weight, supporting predictable performance when paired correctly. Compatibility with piano, butt, or drop hinges allows this stay to serve across different hinge layouts while maintaining its self-close and soft-close behavior. For woodworking and cabinet installations that rely on precise flap door action, this lid support provides a motion-control component matched to light duty flap designs.