Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
HDS-20 left-hand medium duty stay is a soft-down stay designed by Sugatsune America for top-opening flap doors, so it supports upward-opening fronts that need controlled lowering. This stay is part of the Lid Supports and Stays product class, so it is suited to flap and lid applications rather than standard side-hinged doors. The unit is specified as medium duty, which aligns it to flaps where moderate weight and regular use are expected in cabinet or work-surface projects. The HDS-20 design is made to hold the door in the fully opened position, which lets the flap stay up without being held by hand during access or work. This version is black, so it visually blends into darker casework and can be matched to similar dark hardware. The part is a left-hand model with manufacturer part number HDS-20ML/BLK, giving installers a clear identifier when matching hand and torque type across multiple openings.
This Sugatsune top-opening flap stay is for doors that open upward and use piano, butt or concealed hinges, so it slots into familiar hinge layouts without changing the basic door construction. HDS-20 is used in pairs, so planning and installation revolve around a left-hand and corresponding mate supporting the same flap. Torque calculation is defined as Torque = Door Height x 1/2 x Door Weight, so door dimensions and weight directly determine the torque demand that the pair of stays must handle. The HDS-20ML/BLK variant is identified within the K-type torque band of 140 to 200 kgf.cm per pair, or 121 to 173 lbs. inch per pair, so it targets flaps whose calculated torque falls in that window. This clear range lets installers align door design and hardware selection using measurable values.
This HDS-20 left-hand medium duty soft-down stay is for top-opening flap doors that rely on piano, butt or concealed hinges, so it integrates into overhead access fronts, lift-up panels, or horizontal lids that pivot upward. The stay is classified as medium duty, so it suits flap doors whose torque demand matches typical cabinet and furniture lids rather than very light or very heavy specialty fronts. Because HDS-20 is used in pairs, an installation would pair this left-hand model with a corresponding unit to support the same flap, distributing torque across both stays. The design is intended to hold the door fully open, so it supports stationary open positions for tasks like loading storage, accessing contents, or working under the flap in shop or residential settings. The black finish supports darker interiors or exteriors, so it visually recedes inside dark cases and coordinates with similar dark hardware choices.
The specified torque formula, Torque = Door Height x 1/2 x Door Weight, ties the stay directly to flap geometry, so installers can relate actual door size and weight to the required torque capacity of the pair. Within that framework, the K-type range of 140 to 200 kgf.cm per pair, or 121 to 173 lbs. inch per pair, defines the operating window for the HDS-20ML/BLK version, so flaps whose calculated torque lands in this band can be matched to this medium duty model. Using a pair within this torque band helps align flap behavior to the soft-down function described for the HDS-20, contributing to controlled closing motion across the full stroke. The fact that the stay is designed for piano, butt or concealed hinges means it works with hinge systems that place the pivot along the top or side of the opening, so hinge choice and stay selection can be coordinated around consistent door movement. As a left-hand stay, the HDS-20ML/BLK gives clear handed orientation, so hardware planning across multiple openings can assign left and right units in a predictable layout using the part number as the reference.
The HDS-20ML/BLK soft-down stay is designed for a top-opening flap door, so it works on doors that pivot upward and need controlled motion when closing.
The HDS-20 torque is calculated as Torque = Door Height x 1/2 x Door Weight, so door size and weight directly set the torque demand on a pair of stays.
The HDS-20ML/BLK K-type covers 140 to 200 kgf.cm per pair, or 121 to 173 lbs. inch per pair, so it targets flap doors whose calculated torque falls in that range.
The HDS-20 soft-down stay is for top-opening flap doors used with piano, butt or concealed hinges, so it coordinates with these common hinge styles.
The HDS-20ML/BLK is specified as a left-hand stay, so it is suited to installations where a left-hand orientation is required on the flap.
The HDS-20 stay is designed to hold the door in the fully opened position, so the flap remains up while access or work is carried out beneath it.
The HDS-20ML/BLK left-hand medium duty soft-down stay from Sugatsune America is defined for top-opening flap doors, so it suits projects where upward-opening fronts need both support and controlled lowering. Its specified torque formula and K-type range of 140 to 200 kgf.cm per pair, or 121 to 173 lbs. inch per pair, give a measurable basis for aligning flap size and weight to the stay capability. Because it is designed for use in pairs on flaps with piano, butt or concealed hinges, this model fits into established construction methods for cabinets and work surfaces. Selecting this black left-hand HDS-20 variant sets a clear path for consistent function and appearance across dark casework using quantified torque planning.