Sugatsune Lateral Door Opening System White 117-5/16" Door Height - LIN-X1000/WT-S
Description
Sugatsune Lateral Door Opening System For Tight Spaces
Sugatsune lateral door opening system is a lateral door opening system designed as an alternative to sliding or swinging doors in narrow applications. It is specified for linen closets, walk-in-closets, pantry doors, and hidden doors, so it targets common storage and passage openings where standard swing clearance is a problem. The system creates a flush finish when doors are closed, which keeps fronts in the same plane for a clean wall or cabinet face and helps avoid snags as people move past. Its lateral opening allows doors to swing within a small radius, giving you door motion that stays tight to the opening and helps when floor space and aisle width are limited. The system is supplied in white, so it visually matches white casework or trim for a consistent appearance around the opening.
Key Lateral Door System Details For Projects
- The lateral opening design keeps the door swinging within a small radius, which supports layouts where full swing doors would interfere with adjacent cabinetry or walls and helps keep traffic paths clearer.
- A flush finish when doors are closed keeps the door face even with surrounding surfaces, which supports a uniform finished look on closets, pantries, and hidden doors and reduces catching edges along the front.
- Four-way adjustment horizontally, vertically, for depth, and for parallel adjustment allows fine tuning of door position in multiple directions, which helps dial in reveals and alignment after installation or when conditions are out of square.
- The integrated soft close function is designed to prevent the door from slamming shut, which moderates closing speed and reduces impact on the door, frame, and hardware over repeated use.
- The system is specified for doors from 29-1/2 inches to 43-5/16 inches wide, so it covers a range of single-door openings commonly used in closets and pantries without changing to another hardware line.
- A maximum door height of 117-5/16 inches lets the system support tall doors, which helps on full-height linen closets and hidden-door applications that follow wall height.
- The door thickness range of 15/16 inch to 1-9/16 inch accommodates standard thick door constructions, giving flexibility in choosing door materials within that range.
- A maximum door weight of 198 lbs sets a clear capacity for the system, which lets you plan door materials and construction so the door stays within the supported load.
- The specified white color helps this system blend with white interiors or fronts, which is useful in closets and pantries where hardware visibility is a design concern.
Installation-Oriented Details For Door Fit And Motion
This lateral door opening system works within defined door dimensions and adjustments so the door motion stays controlled at the opening. The door width range from 29-1/2 inches to 43-5/16 inches and maximum door height of 117-5/16 inches give clear size parameters, which matters when laying out openings and panels before cutting materials. The supported door thickness from 15/16 inch to 1-9/16 inch aligns with many door build-ups, so you can match the door construction to these limits during planning. The four-way adjustment capability - horizontally, vertically, in depth, and for parallel adjustment - provides post-mounting tuning, which helps bring a tall door into plane and maintain even gaps along jambs or surrounding panels. The soft close function controls the last part of travel, which affects how the door seats into its closed position and supports consistent closing without harsh impact.
Using This LIN-X1000/WT-S System In Real Projects
Where This Lateral Door System Works Best
This LIN-X1000/WT-S lateral door opening system is specified for narrow applications where sliding or swinging doors are not preferred. Listed uses include linen closets, walk-in-closets, pantry doors, and hidden doors, so it addresses storage and passage points that benefit from a compact swing path. The lateral opening allows doors to move within a small radius, which is especially useful in confined corridors or between casework runs where a full swing arc would block access. The ability to handle doors up to 117-5/16 inches high supports floor-to-ceiling installations that line up with room height, so tall closet or hidden doors can be designed without changing hardware type. With support for door widths between 29-1/2 inches and 43-5/16 inches, the system fits many single-door closet and pantry openings, which keeps hardware selection consistent across similar door sizes in the same project.
Adjustment, Door Size, And Soft Close Performance
The four-way adjustment built into this lateral door opening system allows horizontal, vertical, depth, and parallel adjustment, so the door position can be tuned in multiple axes after mounting. This adjustability helps correct for minor framing variations and supports straight reveals on tall doors, which reduces rework if openings are slightly out of plumb. The specified door thickness range of 15/16 inch to 1-9/16 inch gives flexibility in choosing solid, laminated, or built-up doors within that band, so the weight and stiffness of the door can be planned around the maximum load of 198 lbs. That maximum door weight figure defines how heavy the door slab can be while the system still supports proper motion, which is critical when selecting dense materials. The integrated soft close feature is designed to prevent the door from slamming shut, so it moderates closing force as the door seats and helps protect both the hardware and door edges over repeated cycles.
Common Buyer Questions About This Lateral System
What door sizes are supported by the LIN-X1000/WT-S system?
The Sugatsune LIN-X1000/WT-S system is specified for door widths from 29-1/2 inches to 43-5/16 inches and a maximum door height of 117-5/16 inches, which defines the usable door panel size range.
What door thickness range works with this lateral opening system?
The lateral door opening system supports door thickness from 15/16 inch to 1-9/16 inch, so door constructions need to stay within that thickness band for proper engagement with the hardware.
How much weight can this Sugatsune lateral door system handle?
The Sugatsune lateral door opening system is specified for a maximum door weight of 198 lbs, which guides material selection so the door stays within the supported load.
Where is this lateral door system intended to be used?
The system is described for linen closets, walk-in-closets, pantry doors, and hidden doors, so it is oriented toward storage and concealed openings in residential or similar environments.
What adjustment options does the LIN-X1000/WT-S provide?
The LIN-X1000/WT-S lateral opening system provides four-way adjustment horizontally, vertically, for depth, and for parallel adjustment, which supports fine tuning of door alignment after installation.
How does the soft close feature affect door operation?
The soft close feature on this lateral door opening system is designed to prevent the door from slamming shut, so closing is moderated and impact on the door and frame is reduced.
Select This System For Lateral Closet And Door Layouts
The Sugatsune Lateral Door Opening System White 117-5/16 inch Door Height - LIN-X1000/WT-S combines lateral opening, defined door size ranges, and four-way adjustment to support narrow applications. Its capacity for doors up to 117-5/16 inches high and 198 lbs helps when planning tall, substantial panels for closets, pantries, and hidden doors. The white finish and flush closed position support clean visual lines around the opening, while the soft close function moderates door motion. For projects where a small-radius swing and adjustable alignment are priorities, this lateral door opening system offers defined parameters that align the door, opening, and hardware performance.