
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Sugatsune non-magnetic touch latch is a 3-1/4 inch length MLC-100WT latch that provides push-to-open cabinet operation, giving cabinet makers and engineers a controlled way to achieve handle-free doors. This non-magnetic touch latch is part of the MLC-100 Series, so it follows a defined design standard that supports repeatable layouts across multiple doors. The latch is described as a new generation of non-magnetic touch latches with a long stroke and self-adjusting strike, which means it is built specifically to handle precise motion with minimal fuss during setup. The product is in the latches class under locks and latches, so it serves directly as the functional opening and closing component rather than decorative trim.
The MLC-100WT non-magnetic touch latch features a self-adjusting strike plate, which provides vertical adjustment of plus or minus 2 mm and horizontal adjustment of plus or minus 3.5 mm, so installers can dial in contact between latch and strike without reworking door or case parts. This alignment flexibility directly supports quick correction of small drilling or layout variances in cabinet construction. The long 15/16 inch stroke is specified as suited for 1 inch thick doors, so door sizing can be planned around this figure and the latch can deliver the travel needed for a clean push-to-open motion. Together, the stroke length and adjustment ranges allow practical tuning of how far a door moves when pressed and how reliably it re-latches when closed.
The Sugatsune MLC-100WT non-magnetic touch latch is presented as ideal for modern design needs, so it targets applications where a clean exterior surface and concealed hardware are important. Being categorized under bolts, hasps and latches and more specifically as a latch, it is suited to cabinets where secure closure and deliberate opening are required. The long stroke, specified at 15/16 inch, supports 1 inch thick doors, so casework built around this thickness can rely on the latch to deliver enough outward travel for comfortable finger access. The stated use for cabinet makers and engineers shows this latch belongs in projects where repeatable hardware choices matter, such as built-ins, casework runs, and engineered furniture pieces needing consistent touch operation.
The self-adjusting strike plate on the MLC-100WT is described as accommodating vertical adjustments of plus or minus 2 mm and horizontal shifts of plus or minus 3.5 mm, so minor layout differences can be corrected using the hardware rather than changing the cabinet. This range helps align the strike to the latch body in three dimensions, which is important when doors may sit slightly off from their nominal position. The product is built with glass-reinforced plastic (PA), so the material choice supports a stable structure for the touch mechanism in regular cabinet environments. The latch offers an open/close cycle test of 100,000 cycles, so it is evaluated for a high number of operations where doors are opened and closed repeatedly over time. The web description identifies this as a sophisticated, robust option for flawless cabinet functionality, signaling that the design details, from stroke to self-adjusting strike, are focused on consistent performance in working installations.
The MLC-100WT touch latch uses a long 15/16 inch, or 23 mm, stroke that is stated as perfectly suited for 1 inch thick doors, so projects built around that thickness align directly with the design.
The MLC-100WT self-adjusting strike plate offers plus or minus 2 mm vertical and plus or minus 3.5 mm horizontal adjustment, so installers can fine-tune engagement between latch and strike after mounting parts.
The MLC-100WT non-magnetic touch latch is built with glass-reinforced plastic (PA), so the body material provides a stable platform for the touch mechanism under typical cabinet use conditions.
The MLC-100WT latch and strike are described with an open/close cycle test of 100,000 cycles, so the hardware is assessed against a high count of door operations in normal cabinet service.
The Sugatsune MLC-100WT non-magnetic touch latch is specified at 3-1/4 inch length, so layout planning for cabinet interiors can allocate that footprint during design.
The MLC-100WT touch latch is described as perfect for modern design needs and as a sophisticated option, so it supports clean, handle-free cabinet fronts using a simple press-to-open action.
The Sugatsune non-magnetic touch latch MLC-100WT pairs a 3-1/4 inch length body with a long 15/16 inch stroke and a self-adjusting strike plate, so its geometry and adjustment ranges suit planned cabinet layouts. With alignment capability of plus or minus 2 mm vertically and plus or minus 3.5 mm horizontally, installers can bring doors into reliable contact with the latch face. The open/close cycle test of 100,000 cycles and glass-reinforced plastic construction give this latch a defined performance profile. For cabinet makers and engineers setting up modern, push-to-open fronts, this MLC-100 Series touch latch offers a consistent, non-magnetic solution.