Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Invisible Hinges For 3/4" Thick Cabinet Door, Nickel are Peter Meier, Inc. invisible hinges designed for cabinet doors with a minimum thickness of 3/4 inch, so they suit common 18 mm cabinet layouts and standard door constructions. The hinge uses zinc and fiberglass construction, which provides a solid hinge body combined with composite elements for dependable motion in everyday cabinet use. A 3 hinge capacity of 35 lbs defines the load this system is designed to carry, guiding hinge count for typical cabinet door sizing and weight. The hinge offers fluid opening to 180 degrees, allowing doors to swing fully open for clear interior access. Elegant minimalist design with various finishes and no visible screws keeps the hinge hidden in use, which supports clean cabinet lines and a discrete look.
Easy adjustable in 3 dimensional with one simple tool means this hinge is designed for in-place adjustment of door positioning, which is useful for setting even gaps and clean reveals during installation. Complete reversibility due to perfect symmetry between the 2 sides of the hinge allows the same hinge configuration to serve both left-hand and right-hand door applications, simplifying layout for symmetrical cabinet runs. The range of reversibility from 11/16 inch to 13/16 inch, corresponding to 18 mm to 21 mm, provides workable tolerance for doors cut from materials labeled in inch or metric thickness, which helps when cabinetry combines different sheet stocks. Fluid opening to 180 degrees supports full swing function, which is valuable where maximum interior access is needed without obstructing the opening.
This Peter Meier, Inc. invisible hinge is suitable for cabinet doors of 3/4 inch, or 18 mm, minimum thickness, so it aligns with common carcass and face-frame construction practices. The specified range of reversibility from 11/16 inch to 13/16 inch, or 18 mm to 21 mm, allows this hinge to stay within its intended working envelope across slightly thinner or thicker doors, which helps when material thickness varies within stated tolerances. A 3 hinge capacity of 35 lbs defines the door loading approach for this series, guiding how these hinges serve typical cabinet widths and heights within that weight range. Fluid opening to 180 degrees enables doors to open fully out of the way, which benefits cabinetry placed near appliances, walls, or adjacent cabinets where full access is desired.
Easy adjustable in 3 dimensional with one simple tool means the hinge supports height, side, and depth corrections from the hinge side, which allows installers to fine-tune reveals and flushness without pulling doors back off. Complete reversibility due to perfect symmetry between the 2 sides of the hinge simplifies layout on mirrored cabinets, because the same hinge geometry applies on either side. Elegant minimalist design with various finishes and no visible screws helps the hinge disappear in use, which supports projects that prioritize clean, uninterrupted cabinet faces. Zinc and fiberglass construction underpins the hinge mechanism, supporting long-term motion where cabinets see regular opening and closing. Tested for a minimum of 200,000 opening cycles establishes that this hinge has been evaluated for repeated movement, which supports planning for frequent-use doors in kitchens, baths, and similar environments.
This invisible hinge is suitable for cabinet doors of 3/4 inch, or 18 mm, minimum thickness, which aligns with standard cabinet door materials used in many woodworking projects.
This hinge offers fluid opening to 180 degrees, allowing the cabinet door to swing fully open for clear access to the cabinet interior and easier use near adjacent structures.
With three hinges installed, the capacity is 35 lbs, which sets the intended door weight range when planning cabinet door size and material for this hinge series.
This hinge offers complete reversibility due to perfect symmetry between the two sides, so it serves both left-hand and right-hand cabinet doors in similar fashion.
The easy adjustable in 3 dimensional design, using one simple tool, allows fine tuning of door position in height, side, and depth, which speeds alignment and clean reveal setup.
Testing for a minimum of 200,000 opening cycles indicates the hinge design has been evaluated for repeated movement, supporting use on frequently operated cabinet doors.
The Peter Meier, Inc. C929NK invisible hinge suits cabinet doors of 3/4 inch minimum thickness, with a 3 hinge capacity of 35 lbs and fluid 180 degree opening. Its reversible, 3 dimensional adjustable design and zinc and fiberglass construction support precise alignment and long-term cabinet use. For projects needing an elegant minimalist design with no visible screws and an invisible hinge tested for a minimum of 200,000 opening cycles, this nickel finish model from Wurth Baer Supply offers a focused solution for modern cabinet work.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CMC929BLK Mfr# C929BLK | Invisible Hinges For 3/4" Thick Cabinet Door, Black | ||||
Sold in: 1 Each |  CMC929SIL Mfr# C929SIL | Invisible Hinges For 3/4" Thick Cabinet Door, Silver | ||||
Sold in: 1 Each |  CMC929WHT Mfr# C929WHT | Invisible Hinges For 3/4" Thick Cabinet Door, White |
