Amerock Uprise 192mm pull is a 7-9/16 inch (192 mm) center-to-center cabinet pull from the Uprise collection, so it spans wider cabinet fronts cleanly and sets consistent spacing between fasteners on doors and drawers. The pull is finished in Matte Black, which provides a dark, uniform surface that reads as a simple, bold line across wood grains and painted faces during layout. Its gentle curve combined with squared edges creates a sculptural profile that keeps a straight visual reference while softening hand contact on frequently used fronts. As part of the Amerock Uprise collection, this pull carries the same design language across multiple locations, helping maintain visual continuity on banks of cabinets or casework runs. The Allison by Amerock branding ties this pull to a long-running decorative cabinet hardware line, which matters when matching other Amerock pieces on a project.
The 192 mm center-to-center measurement defines the exact distance between mounting holes, giving installers a fixed dimension for drilling jigs and templates when placing the Amerock Uprise 192mm pull across cabinet banks. This 7-9/16 inch spread sets a longer handle footprint, which distributes the pull point across wider fronts and panels instead of concentrating force near a corner. Because the pull belongs to the Uprise collection, its consistent geometry can be repeated at the same height and spacing on doors and drawers, creating straight visual lines along the run. The Matte Black finish keeps reflections low, so layout marks and surrounding edges remain easy to read as the pull is aligned to rails, stiles, or drawer fronts during mounting.
The Amerock BP36919FB Uprise 7-9/16 inch (192 mm) center-to-center pull is part of Amerock decorative cabinet hardware, positioning it for use on cabinet doors and drawers where the handle is always in view. Its larger 192 mm span suits wider fronts, allowing the pull to bridge more of the drawer or door width so the grip point stays closer to the center of the panel. The Uprise collection description highlights a gentle curve meeting squared edges, giving a shape that works across both more linear contemporary cabinets and softer transitional designs in the same project. The Matte Black finish is described as a simple, yet bold statement, so it stands out against lighter substrates, turning the pull into a visible design line across kitchen, bath, or built-in cabinetry runs.
The defined 192 mm center-to-center dimension on the Amerock Uprise 192mm pull allows installers to standardize drilling operations, using a single setting for jigs or drilling guides across every cabinet front in a job. That repeatable spacing cuts layout time and supports consistent reveals, especially on long runs of drawers where the eye catches any small shift in handle position. The combination of gentle curve and squared edges creates a repeatable visual reference, letting installers align the pull with rails or stile edges by reading straight lines at the ends while the curved grip remains comfortable to use. The Matte Black finish reads strongly as a continuous band on light fronts, making final alignment checks more straightforward when stepping back to evaluate symmetry and hardware sightlines along the entire elevation.
The Amerock Uprise 192mm pull has a 7-9/16 inch (192 mm) center-to-center dimension, giving installers a fixed hole spacing to use for drilling and layout on cabinet doors or drawers.
The BP36919FB Uprise pull is finished in Matte Black, creating a dark, understated surface that stands out visually on lighter cabinetry and makes handle positioning easy to read.
The Uprise series pull combines a gentle curve with squared edges, giving a sculptural look that works across both linear contemporary cabinets and softer transitional cabinet designs.
The 7-9/16 inch (192 mm) center-to-center on this pull sets one consistent drilling dimension, which streamlines jig setup and keeps handle spacing uniform across multiple cabinet fronts.
The BP36919FB pull is an Allison by Amerock product from the Uprise collection, so it coordinates with other Amerock decorative cabinet hardware on the same project.
This matte black pull is decorative cabinet hardware used on doors and drawers, providing a bold, visible grip point that finishes off the front of casework and cabinetry.
The Amerock Uprise 192mm pull brings a 7-9/16 inch (192 mm) center-to-center span, a Matte Black finish, and a gentle-curve-with-squared-edges profile that all work together on visible cabinet fronts. For projects built around Amerock decorative hardware, the BP36919FB model keeps design and hole spacing consistent from cabinet to cabinet, helping installers and shops repeat the same look across entire rooms or phases. Choosing this pull aligns cabinet layout, finish choice, and handle geometry in one part number, simplifying specification and repeat ordering when expanding or updating matching casework.