Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
CORNERSTONE MAXX Scalea 2 Shelf Blind Corner Kit turns a blind corner cabinet with a 21 inch opening into accessible storage by using a pull-out frame and two trays so stored items can be reached at the front of the cabinet. This Vauth-Sagel blind corner organizer uses PAM power assisted movement in the pull-out and push-in direction, which supports smooth travel of the loaded trays and helps the motion stay controlled in daily use. Each shelf has a load capacity of max. 55 lb per shelf, so the trays handle heavier kitchen contents without overloading the system. The installation height range of 25-1/5 inch to 33-1/2 inch lets the mechanism fit common base cabinet interiors. The frame finish in Carbon Steel Gray gives the organizer a neutral, modern appearance that coordinates with many cabinet interiors. Shelves can be moved in and out independently, so the front and rear storage zones are accessed separately.
This blind corner pull-out kit is specified for a 21 inch opening, so the cabinet face opening must match that dimension to allow the frame and trays to travel. The installation template feature provides no measuring necessary when installing, which streamlines layout of mounting positions inside the cabinet. Unhanded installation lets the base mechanism be used in both left and right situations, so the swing setup is driven by tray selection rather than separate mechanisms. If the blind corner is to the right, then a Cornerstone Maxx Left Tray is used with this layout, aligning the trays with the opening as they move. If the blind corner is to the left, then a Cornerstone Maxx Right Tray is used so the shelves move toward the user. Simple height adjustment, even when installed, allows the trays to be fine-tuned vertically after the frame is in place.
This Cornerstone Maxx blind corner organizer is intended for blind corner cabinets with a 21 inch opening, so it serves typical base cabinet runs where one cabinet extends past another. The installation height range of 25-1/5 inch to 33-1/2 inch lets the frame be positioned inside many standard-height base cabinets, so the moving trays clear the cabinet floor and top rail within that span. The unhanded installation design means a single base mechanism can adapt to layouts where the blind section is either left or right, so planning focuses on cabinet configuration rather than different hardware models. If the blind corner is to the right, using a Cornerstone Maxx Left Tray aligns the tray motion with the opening on that side. If the blind corner is to the left, using a Cornerstone Maxx Right Tray sets the trays to travel from that direction toward the user. Shelves can be moved in and out independently, so one side can be accessed without shifting the other, which fits cabinets located near appliances or walls.
The PAM power assisted movement in pull-out and push-in direction supports smoother travel of the trays, so loaded shelves glide rather than resisting or slamming at the end of travel. Load capacity of max. 55 lb per shelf defines how much weight each level can carry, so contents can be planned to stay within that limit and the motion remains consistent over time. Tool-free assembly of shelf elements on the support arms reduces handling during installation, so trays are placed and secured without separate fastener steps once the frame is set. Simple height adjustment, even when installed, allows small corrections if the tray position needs to clear door hinges or interior obstructions, supporting clean alignment with surrounding cabinetry. The floating design due to hidden fastening keeps mounting points concealed, so the trays appear to cantilever from the frame and present a clean look when extended. Frame finish in Carbon Steel Gray and available tray bottom finishes in Carbon Steel Gray, Walnut, and Maple offer coordinated visuals, so the working hardware also supports a consistent interior appearance.
CORNERSTONE MAXX Scalea 2 Shelf Blind Corner Kit is designed for a 21 inch opening, so the cabinet face must provide that clearance for the trays and frame to travel properly.
Each shelf in this blind corner organizer has a load capacity of max. 55 lb per shelf, so stored items should be planned within that limit for consistent movement.
The blind corner kit installs at a height between 25-1/5 inch and 33-1/2 inch, so the frame can be located within typical base cabinet interiors in that vertical span.
If the blind corner is to the right, a Cornerstone Maxx Left Tray is used, and if the blind corner is to the left, a Cornerstone Maxx Right Tray is used, aligning tray travel with the cabinet opening.
PAM power assisted movement supports the pull-out and push-in direction of the trays, so loaded shelves move more smoothly during operation.
The CORNERSTONE MAXX Scalea kit offers simple height adjustment even when installed, so tray position can be fine-tuned inside the cabinet once the frame is mounted.
This CORNERSTONE MAXX Scalea 2 Shelf Blind Corner Kit in Carbon Steel Gray matches projects needing a blind corner organizer for a 21 inch opening, with unhanded installation to cover either left or right layouts. The max. 55 lb per shelf rating and 25-1/5 inch to 33-1/2 inch installation height range define how it fits into cabinet plans, while tool-free shelf assembly and simple height adjustment support straightforward setup on site. PAM power assisted movement and independently moving shelves contribute to accessible storage and controlled motion during use.
Sold In: 1 Kit
