Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
CORNERSTONE Swing Scalea 2 Shelf Blind Corner Kit is a blind corner organizer that swings trays out of a 24 inch opening, turning a hard-to-reach blind corner cabinet into accessible storage that is easier to work out of every day. The kit is a 2-tray blind corner organizer, so two shelves move out toward the user, helping bring stored items toward the front of the cabinet. Each shelf has a load capacity of maximum 40 lb per shelf, which supports typical kitchen loads while helping maintain stable movement when the system is extended. The minimum installation depth of 19.3125 inches defines the cabinet interior space this unit occupies, which matters when laying out casework or checking interference with adjacent components. An installation height range of 25.6 to 27.2 inches gives flexibility inside various base cabinet heights, allowing the trays to clear hinges and face frames during use.
The Swing Scalea blind corner kit installs with a single support tube that needs to be mounted, so the core setup focuses on positioning the vertical post and attached mechanism rather than assembling multiple separate supports. An installation height between 25.6 and 27.2 inches allows the post to be set where the trays clear door openings and face frames while still fitting under standard countertop levels. The minimum installation depth of 19.3125 inches defines how far back the cabinet interior must run, which affects where the mechanism sits relative to the front frame. Because the unit is unhanded, the same installation approach can be applied to either left or right blind corners without different parts. The soft-close mechanism on the slide mechanism controls movement as the trays return into the cabinet, reducing abrupt closing forces on the mounting points.
This Vauth-Sagel blind corner organizer is designed for a 24 inch opening, so it is suited to blind corner base cabinets sized to provide that front access width. The minimum installation depth of 19.3125 inches ties the system to cabinets with enough interior depth for the trays and swing arc, making it a match for typical full-depth base units. The installation height range of 25.6 to 27.2 inches positions the support tube and trays within common base cabinet interior spaces, fitting under countertops while allowing vertical clearance for stored items. As a 2-tray kit, it provides two moving storage levels, which can be used to separate lighter and heavier items according to the 40 lb per shelf maximum load capacity. The frame and post hardware in silver align well with many kitchen hardware finishes, helping this organizer integrate into broader kitchen hardware packages.
The unhanded installation of this blind corner pull-out swing system means a single product can be used for either left or right blind corners, which helps standardize layouts across multiple cabinets on a project. Easy assembly, where only the support tube needs to be mounted, focuses attention on accurately anchoring the main post, which supports consistent alignment of the trays from job to job. The soft-close mechanism built into the slide mechanism manages the last portion of travel as the trays return, which helps protect cabinet sides and front frames from repeated impact over time. The option to attach the bottom shelf to the door lets the door act as the driver for the lower tray, helping achieve predictable, repeatable access to frequently used items whenever the door is opened. Tray bottom finish options of Carbon Steel Gray, Walnut, and Maple support visual consistency with different interior design schemes, which can be important when cabinets are installed in open-plan kitchens where interiors are often seen. The manufacturer part number BOMCSWINGSC24CSG identifies this specific CORNERSTONE Swing Scalea CS 2-tray 24 inch configuration, which matters when matching specifications across drawings, purchase lists, and installed hardware in the field.
The CORNERSTONE Swing Scalea 2 Shelf Blind Corner Kit is specified for a 24 inch opening, so it fits blind corner bases designed with that access width at the front.
Each shelf on this blind corner organizer has a maximum load capacity of 40 lb per shelf, which supports typical kitchen storage while keeping the swing action within its design limits.
This Vauth-Sagel blind corner unit requires a minimum installation depth of 19.3125 inches, so the cabinet interior must extend at least that far to accommodate the mechanism and trays.
The blind corner kit has unhanded installation, so the same unit works in either left or right blind corner cabinet orientations on a project.
The bottom shelf has the option of attaching to the door, allowing the door movement to pull the lower tray outward and bring stored items forward.
The tray bottom finish is available in Carbon Steel Gray, Walnut, and Maple, giving options to coordinate the interior look with surrounding cabinetry.
The CORNERSTONE Swing Scalea 2 Shelf Blind Corner Kit in Carbon Steel Gray combines a 24 inch opening requirement, unhanded installation, and a 40 lb per shelf rating to address common blind corner cabinet layouts. The silver frame and post hardware, together with Carbon Steel Gray, Walnut, and Maple tray bottom finish options, support a coordinated interior appearance across different kitchen styles. With a minimum installation depth of 19.3125 inches and an installation height range of 25.6 to 27.2 inches, it aligns well with typical base cabinet dimensions used in many projects. The soft-close slide mechanism, 2-tray configuration, and optional door attachment for the bottom shelf all focus on improving access to stored items in the blind corner area.
Sold In: 1 Kit
