
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Vauth-Sagel ENVI BMT waste pullout describes a bottom mount trash pullout system that positions waste management inside a cabinet, keeping the bin accessible on a smooth slide path. The product name specifies a 35 quart carbon steel gray waste bin, so capacity and visual match are defined for layout and cabinet interior planning. The description identifies this unit as a bottom mount trash pullout, which sets the mounting plane on the cabinet floor for a straightforward installation approach. The web description states that this is an adjustable door mount system, so the cabinet door can be fastened to the pullout frame for an integrated motion that tracks with the slides. The brand Vauth-Sagel is flagged throughout the data, tying this waste pullout to a recognized kitchen and bath cabinet component line.
The product class identifies this unit as a bottom mount trash pullout, so mounting occurs on the cabinet floor rather than on the sides, guiding layout to the cabinet bottom panel. The web description explains that it is an adjustable door mount system, which means the installer connects the cabinet door directly to the pullout frame and then fine tunes the position for reveal and parallel alignment. The stated soft-close function on the Saphir carriage influences slide placement, because the hardware must travel freely for the damping feature to operate correctly during open and close cycles. The 11-1/4 inch reference in the product name signals a width dimension that informs cabinet interior clearance planning when positioning the unit during installation.
The category designation of trash pull-outs places this product in kitchen and bath cabinet applications where concealed waste is preferred, so it works in layouts that call for pullout trash behind a standard door front. The bottom mount construction described in the product class suits cabinets that have a stable floor panel to support the load, allowing installers to anchor the pullout frame directly to that surface. The 11-1/4 inch description in the product name gives a size cue that can be matched to narrow or single-door cabinets, helping designers slot this pullout into specific openings during layout. The 35 quart bin sizing indicated in both the name and description positions the system for medium-capacity use, so it pairs well with typical residential kitchen trash demands without dominating cabinet space.
The mention of a Saphir carriage with soft-close identifies a slide carriage engineered for controlled closing, so the pullout slows before reaching the cabinet face and avoids hard impacts. That same carriage reference confirms that the soft-close function is built into the moving frame, which simplifies operation because the user pulls the door to activate the slides and the mechanism handles the final travel. The carbon steel gray material statement explains that the structural elements are steel, supporting rigidity in the moving frame so alignment between the bin and slides is maintained under a filled 35 quart load. The soft-close feature described in the web text also contributes to predictable motion, which is helpful when the cabinet door is mounted to the frame using the adjustable door mount system noted in the description. The combination of a defined 35 quart bin, bottom mount frame, and soft-close Saphir carriage creates a repeatable pullout action that holds the waste container in a consistent path during every cycle.
The Vauth-Sagel ENVI BMT waste pullout is identified as a bottom mount trash pullout, so it fastens to the cabinet floor, setting the support plane at the bottom panel.
The product name states a 35 quart bin, giving a defined single-container capacity that helps plan trash volume for typical kitchen or bath cabinet applications.
The web description notes a Saphir carriage with soft-close, so the mechanism slows the pullout during closing to reduce slamming against the cabinet face.
The web description identifies an adjustable door mount system, meaning the door is fastened to the pullout frame and its position can be adjusted for alignment.
The description specifies carbon steel with a gray finish, providing a steel structure with a uniform gray appearance that matches the gray waste bin.
The 11-1/4 inch reference in the product name signals a key dimension that helps relate the pullout size to the interior width of the target cabinet opening.
The product name and web description define this Vauth-Sagel ENVI BMT bottom mount trash pullout as a 35 quart carbon steel gray system with an adjustable door mount and soft-close Saphir carriage, so it suits projects needing a defined-capacity, cabinet-floor-mounted waste solution. The bottom mount classification and 11-1/4 inch reference give clear cues for aligning cabinet interior dimensions with the pullout frame, supporting accurate planning. For cabinet work that calls for a gray 35 quart pullout with integrated soft-close and direct door mounting, this model provides a clearly specified option.
Sold In: 1 Kit
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Kit | WWENVIBMTSA235CSG Mfr# BOMENVIBMTSA235CSG | Vauth-Sagel ENVI BMT 14-1/3" Carbon Steel Gray Bottom Mount Waste Pullout with 2-35 Quart Carbon steel grey Bins Soft-Close, BOMENVIBMTSA235CSG | ||||
Sold in: 1 Each | RS53WC-1535SCDM113 Mfr# 53WC-1535SCDM-113 | Rev-A-Shelf 53WC 11" Orion Gray Bottom Mount Waste Pullout with 1-35 Quart Orion grey Bin Soft-Close, 53WC-1535SCDM-113 |