Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Vauth-Sagel SUB Side Planero is a 2-shelf base cabinet pullout organizer that stores contents on two baskets and brings them out of the cabinet in one motion, which helps a cabinet user see and reach items without digging into the back of the base.
This base cabinet pull-out system is built around a frame and slide mechanism that moves the baskets smoothly as one unit, so installers can upgrade a standard 12 inch wide base cabinet into an organized pullout instead of a fixed shelf space.
The organizer is part of the Base Cabinetry Organizers and Fillers class, so it is intended to live inside a base cabinet and work as a dedicated storage zone that uses the full interior height and depth rather than leaving hard-to-reach corners.
The system uses an unhanded installation design, meaning the same unit can be mounted to open from either side, which simplifies planning when left and right base cabinets change from one job to the next.
A carbon steel gray frame finish and matching basket bottom option match the SUB Side Planero identity, so a cabinet interior gains a consistent look that fits with modern hardware finishes while still focusing on function.
This SUB Side Planero base cabinet pullout relies on a frame and slide mechanism sized for a 12 by 25.5 inch layout as described in the SAP reference SUB SIDE PLANERO CS 2-BSKT 12X25.5, so installers can match the organizer to a base that fits this footprint when laying out a run.
The EasyFit tool-free connection to the cabinet door is designed so the door attaches to the pullout without separate tools on this joint, which helps speed on-site assembly and makes it simpler to re-position the front until alignment looks right.
The 3D front adjustment allows simple, convenient door adjustment after mounting, so the door can be fine-tuned in three directions to match adjacent faces and maintain consistent margins across the cabinet line.
A supplied installation template eliminates measuring during installation inside the cabinet, since the template positions mounting locations and guides placement, which saves layout time and reduces layout errors when fitting the frame and slides.
The specified minimum installation depth of 23 inches defines the cabinet interior depth this system is designed for, so planners can select base cabinets with enough interior run for the full slide travel and basket footprint.
The Vauth-Sagel SUB Side Planero 2-shelf base cabinet pullout organizer is designed for use in base cabinets within kitchen and bath projects, since it is categorized under Kitchen & Bath Cabinet Accessories and Base & Wall Cabinet Pull-Out Systems.
The SAP description SUB SIDE PLANERO CS 2-BSKT 12X25.5 shows that this model is the carbon steel gray version with two baskets sized around a 12 inch by 25.5 inch base, which ties it to typical narrow base cabinet footprints that benefit from pullout storage.
The system forms part of a base cabinetry organizer and filler strategy, because it turns a standard base cavity into a structured storage pullout that uses a vertical frame and stacked baskets rather than a plain open box.
The basket bottoms are available in carbon steel gray and walnut finishes, giving two visual options for the shelf surfaces inside the cabinet, which helps the organizer tie into different interior looks while the frame remains carbon steel gray.
The integrated soft-closing and self-closing feature suits everyday kitchen and bath cabinet use, since the mechanism pulls the loaded organizer back into the cabinet and completes the close without a hard stop, which is useful in busy household or light commercial environments.
The unhanded installation of this SUB Side Planero pullout means a single part number BOMSUBPL2B1225CSG can be used on either left- or right-opening bases, which simplifies ordering and reduces mixing similar but handed models in the shop or on the truck.
The EasyFit tool-free door connection changes front mounting into a push-on or snap-style step at the organizer interface, so installers spend less time driving fasteners at the front and can concentrate on aligning reveal using the built-in 3D front adjustment.
The 3D front adjustment gives control after the frame is fixed, letting the installer move the door in three axes relative to the frame, which is especially useful when lining the pullout door with adjacent drawers and doors across an uneven wall.
The installation template removes the need for tape-measure layout marks inside the cabinet, since hole positions and reference lines are already defined, which speeds production work when multiple identical bases use the same SUB Side Planero layout.
The maximum load capacity of 44 lb sets a clear limit for what this frame and slide mechanism is intended to carry, so project planners can assign appropriate contents and avoid overloading the pullout when deciding which items will live on the two baskets.
The minimum installation depth of 23 inches means the slide travel and basket depth are engineered around a full-depth base cabinet, allowing the organizer to extend far enough that items at the back of each basket move into clear view when the unit is opened.
The carbon steel gray frame finish gives the structure a uniform, neutral appearance inside the cabinet, while the option of basket bottoms in carbon steel gray or walnut lets the visible shelf surfaces match either a contemporary metal look or a warmer tone as needed.
The classification under Base Cabinetry Organizers and Fillers positions this product as part of a coordinated interior hardware plan, so designers can use it alongside other pull-out systems in the same line to keep function and appearance consistent throughout a project.
The SUB Side Planero pullout is designed for base cabinets in kitchen and bath projects, so it fits applications covered by Kitchen & Bath Cabinet Accessories and Base Cabinetry Organizers and Fillers.
The EasyFit tool-free connection lets the cabinet door attach to the pullout frame without tools at that joint, which speeds mounting and simplifies on-site fine-tuning of the door position.
The 3D front adjustment provides simple, convenient movement of the door in three directions, helping align the pullout front with neighboring doors and drawer fronts for even gaps and clean lines.
The 23 inch minimum installation depth defines the cabinet interior depth needed for full slide travel, so the baskets can extend properly and present items fully when the organizer is opened.
The SUB Side Planero pullout supports a maximum load capacity of 44 lb, which helps planners match stored items and weight expectations to the frame and slide design of the system.
The integrated soft-closing and self-closing feature draws the organizer gently into the cabinet and completes the close, which helps reduce slamming and keeps the front sitting consistently in the closed position.
The Vauth-Sagel SUB Side Planero SUB Side Planero base cabinet pullout brings together a 2-shelf organizer layout, unhanded installation, EasyFit tool-free door connection, 3D front adjustment, and integrated soft-closing and self-closing, so it suits base cabinet projects where organized access, clean alignment, and efficient installation matter.
Sold In: 1 Kit
