Vauth-Sagel SUB Side Saphir Carbon Steel Gray 4-1/16" 2-Shelf Base Cabinet Pullout Organizer with Soft-Close Slides, BOMSUBSA2B630CSG

Vauth-Sagel SUB Side Saphir Pullout Organizer

Vauth-Sagel SUB Side Saphir pullout is a 2-shelf base cabinet pullout organizer with soft-close slides that brings stored items out of a base cabinet for direct access. The organizer is designed as a base cabinetry organizer and filler, so it uses the full cabinet depth for usable storage in kitchen and bath layouts. The frame finish and basket bottom finish are carbon steel gray, giving a uniform interior look that visually matches across the frame and both shelves. The system is sold in kits in a 2-basket or 3-basket configuration, which allows matching layouts across multiple cabinets in the same run. Maximum load capacity is 44 lbs, so the pullout can carry a practical mix of goods in both baskets without overloading the slide mechanism. Minimum installation depth is 23 inches, so the unit fits base cabinets that meet that depth measurement.

Key Base Cabinet Pullout Working Advantages

• The 2-basket layout concentrates storage on two levels, which keeps shorter items in view and reduces bending to reach deep into the cabinet.
• Available 2-basket or 3-basket kits allow consistent interior planning across different base cabinets, helping maintain the same organizer style in a run.
• Unhanded installation means the system can be mounted for left- or right-opening cabinets without separate part numbers, simplifying planning for multiple openings.
• The easy br Fit tool-free connection to the cabinet door speeds mounting because the front can be attached and adjusted without separate tools at that step.
• 3D front adjustment allows the front to be aligned in height, side-to-side, and depth so door reveals can be tuned after installation for a clean cabinet face.
• Soft-closing and self-closing slides pull the organizer fully into the cabinet at the end of travel, which protects the front alignment and prevents slamming.

Installation And Fit Details For This Pullout

The Vauth-Sagel base cabinet pullout uses an easy br Fit tool-free connection to the cabinet door, so the front is connected directly to the frame without extra fasteners at that stage, which streamlines the mounting workflow. Unhanded installation allows the same pullout frame to be used on either side of a run, so layout changes on site do not require different organizers. The 3D front adjustment feature supports precise door alignment because the front can be shifted in three directions until the reveals match neighboring fronts. A maximum load capacity of 44 lbs gives a clear working limit when planning what will be stored on the two baskets. The specified minimum installation depth of 23 inches defines the cabinet interior space required so the frame and baskets travel fully without interference.

Using This Base Cabinet Pullout In Real Projects

Where This 2-Shelf Base Cabinet Pullout Fits Best

This base cabinet pullout organizer is part of the Base Cabinetry Organizers and Fillers class, so it is intended for use in kitchen and bath base cabinets where interior access is limited by depth. The frame and basket bottoms share a carbon steel gray finish, giving a uniform look inside the cabinet that reads as a single system when the door is opened. With the organizer offered in both 2-basket and 3-basket kits, cabinet runs can be laid out so wider or taller cabinets receive additional levels while narrower or shorter openings use the 2-basket configuration. The 2-shelf version concentrates weight on two levels, which pairs well with the 44 lb load capacity rating as loads are distributed between them. The minimum installation depth of 23 inches means it suits standard-depth base cabinets where full-depth storage is needed.

How Adjustment And Slides Support Repeatable Results

The integrated soft-closing and self-closing slide mechanism pulls the frame and baskets smoothly into the cabinet at the end of travel, which protects the front from repeated impact and keeps reveals consistent over time. 3D front adjustment is built into the design, allowing the front to be shifted vertically, horizontally, and in depth so the door can be tuned to align with adjacent fronts after the frame is anchored in the cabinet. This kind of 3D front adjustment cabinet pullout feature is especially useful during final installation, because minor cabinet tolerances can be compensated at the front instead of reworking the case. The easy br Fit tool-free door connection saves time when multiple cabinets on a job are using the same organizer, as each front can be mounted and then fine-tuned in sequence. Because installation is unhanded, replacements and future additions use the same part number, which keeps long-term service straightforward when matching existing organizers.

Common Questions About This Cabinet Pullout Organizer

Selecting This Pullout For Your Next Cabinet Run

The Vauth-Sagel SUB Side Saphir pullout organizer combines a 2-basket layout, carbon steel gray finish, and soft-closing, self-closing slides to handle up to 44 lbs in a 23-inch-deep base cabinet. Unhanded installation, 3D front adjustment, and the easy br Fit tool-free door connection help streamline layout across multiple cabinets when consistent function and appearance are required on a kitchen or bath project. For base cabinetry that needs organized, pull-forward storage, this 2-shelf base cabinet pullout provides a defined, rated solution that aligns with standard cabinet depths and professional installation workflows.