Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Vauth-Sagel TAL pull out pantry is a carbon steel gray 4-shelf pull-out pantry organizer that runs from 57 inches to 67 inches tall, so it covers a wide range of tall cabinet interior heights on one frame. This pantry pull-out is in the Pantry Pull-Out Organizers class, so it is built as a full-height storage system for kitchen and bath cabinetry. The unit uses soft-closing slides, which slow the closing motion and pull the pantry gently into the cabinet, helping doors land in a consistent position. The system is sold as a kit, which gives installers a matched frame, slide system, PAM mechanism, and basket set under a single manufacturer part number.
The EasyFit self-locking frame connection into upper and lower guide rails means once the guide rails are fixed, the frame clips into place without extra fastening steps, which shortens installation time in the cabinet. The unhanded installation detail means the same frame and slide set can be used on either left or right cabinet locations, reducing part variation on a job. The 3-D front adjustment at the pantry front allows fine-tuning of the door alignment in three directions, supporting tight, consistent gaps with neighboring doors and drawer fronts. Heavy-duty, noise-restricted roller guides carry the rated load while keeping travel smooth and quiet, which is important in tall pantry applications that extend fully out of the cabinet. Soft-closing slides finish the stroke by pulling the loaded unit closed in a controlled way, which limits impacts on the cabinet frame.
This 57 inch to 67 inch tall pull-out pantry is intended for pantry cabinet products and shelves, so it targets tall kitchen or bath cabinets that can accept a full-height pull-out frame. The minimum installation depth of 23 inches means it is suited to cabinets meeting or exceeding that interior depth, aligning the pull-out stroke with typical tall pantry box dimensions. The frame finish is carbon steel gray, which coordinates with the basket bottom finish option in carbon steel gray when that configuration is selected, giving a unified look inside the cabinet. Basket bottoms are also available in walnut, which offers an alternative interior appearance while still working with the same core TAL frame and slide design. The 4-shelf configuration is supplied as a kit designated BOMTALPPL4B1557CSG, tying frame, PAM mechanism, and four baskets under one ordering code for project planning.
The PAM Power Assisted Movement in pull-out direction helps initiate pantry extension, so the tall, fully loaded frame starts moving out of the cabinet more easily, which is useful in high-capacity storage applications. Full synchronized bottom runner and synchronized upper and lower end stops coordinate movement between top and bottom guidance, which keeps the pantry frame tracking straight and stable throughout the stroke. That synchronization supports repeatable alignment of the baskets relative to the opening every time the unit is used. Individual basket height adjustment lets installers fine-tune spacing after the frame is mounted, reducing the need for pre-planned fixed shelf locations and adapting to real contents. The self-closing and soft-closing action draws the pantry home at the end of travel, supporting consistent closed positioning that works well with the 3-D front adjustment for long-term door alignment. Heavy-duty roller guides with noise restriction protect against harsh movement under the maximum rated 256 lb load, which matters when the pantry is filled with dense goods in everyday use.
The Vauth-Sagel TAL pull out pantry is designed for cabinet interior heights from 57 inches to 67 inches, so it fits a range of tall pantry cabinet sizes within that span.
The pantry pull-out system has a total load capacity of up to 256 lbs, which supports storage of heavier pantry goods across the four adjustable baskets.
The unhanded installation means the same TAL pantry unit can be installed on either side of an opening, simplifying layout choices and reducing different SKUs on site.
The EasyFit self-locking system allows the frame to lock into the upper and lower guide rails without tools, which speeds final assembly inside the pantry cabinet.
The 3-D front adjustment provides three-direction door adjustment, so the pantry front can be aligned with surrounding doors for even gaps and a flush appearance.
The TAL pantry frame has a carbon steel gray finish. Basket bottoms are available in carbon steel gray and walnut, allowing a coordinated or contrasting interior look.
This soft-close pantry pull out system combines a 57 inch to 67 inch tall frame, PAM Power Assisted Movement, and heavy-duty, noise-restricted roller guides, giving tall cabinets a high-capacity, smooth-running organizer. The 3-D front adjustment, unhanded installation, and EasyFit self-locking frame simplify fitting and door alignment on site. With individual basket height adjustment and a total load capacity of 256 lbs, this Vauth-Sagel TAL pantry pull-out provides a configurable, high-capacity storage solution under a single manufacturer part number for project planning.
Sold In: 1 Kit
