Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Powermatic 4" X 20' Collection Hose provides a 4 inch diameter hose run for JET Dust Collectors, giving a defined airflow path from machines to the collector. This fit between dust source and JET unit matters for moving chips and fines away from work areas. The 20 foot length allows a single continuous run across typical shop layouts, which reduces the number of connection points that can leak or snag during use. Being part of the JET Tools dust collection line ties this hose to machinery-level dust control, which helps keep equipment and surrounding surfaces cleaner during woodworking operations. The hose is identified by manufacturer part number JT9-JW1032 and SAP description 4IN X 20FT HOSE, which helps match it accurately to drawings, purchase lists, or existing JET documentation when planning or repeat-ordering dust collection components.
The 4 inch diameter stated in 4IN X 20FT HOSE defines the hose interface to JET Dust Collectors, so layout planning can center around 4 inch ports when aligning machines to the collector. Describing the product as 4" Diameter Hoses for JET Dust Collectors, available in a 20' Length, ties the hose directly to JET dust collection installations, which helps when grouping multiple machines on a shared 4 inch trunk or branch design. The 20 foot length supports routing along walls or ceilings in many shop spaces, which can keep floor areas clearer around machinery. The static electrical build-up grounding note for plastic fittings and hoses flags that this hose operates in systems where static charges can develop, so routing and support choices can allow for grounding connections as part of the dust collection setup.
The Web Description identifies this as a 4" Diameter Hose for JET Dust Collectors in a 20' Length, placing it directly between dust-producing machines and JET Dust Collectors in a woodworking shop. The 4 inch diameter means it fits systems designed around 4 inch dust ports, so planners can map straight runs between machines and collector intakes without shifting to a different hose diameter at every connection. Being part of the Machinery Dust Collectors category positions the hose inside complete JET Tools dust collection setups, so it can serve as a main or branch run in that system. The 20 foot length helps span distances to more remote machines in a row or cluster, which can reduce the need for intermediate joints that might become leak or snag points during daily operation and repositioning.
The 4IN X 20FT HOSE SAP description and JT9-JW1032 part number establish a specific, repeatable specification for this hose, which helps shops standardize dust collection layouts and reorder the same configuration over time. The 4 inch diameter described as 4" Diameter Hoses for JET Dust Collectors keeps airflow sizing consistent, supporting predictable performance across different machine connections set up around JET Dust Collectors. When a run maintains that 4 inch size, pressure loss from sudden diameter changes is reduced, which supports more uniform pickup at the tool end. The grounding note stating that all plastic fittings and hoses must be grounded against static electrical build-up highlights that this hose operates where dust-laden air moves at speed, so installers can route and support the hose with grounding provisions in mind as part of consistent, repeatable system behavior.
The Powermatic 4" X 20' Collection Hose has a 4 inch diameter, which sets its connection size for JET Dust Collectors and tools designed around 4 inch dust collection ports.
The JT9-JW1032 dust collection hose is 20 feet long, allowing a single continuous run between a JET Dust Collector and machines positioned farther away in the shop.
The hose is described as a 4" Diameter Hose for JET Dust Collectors, so it is intended to be used as part of JET Dust Collector systems within the Machinery Dust Collectors category.
The product note states that all plastic fittings and hoses must be grounded against static electrical build-up, indicating that static can develop in dust collection airflow and that systems are designed with grounding in mind.
This 4IN X 20FT HOSE is identified by the SAP description 4IN X 20FT HOSE and manufacturer part number JT9-JW1032, which supports accurate repeat ordering for established dust systems.
The 20 foot length lets installers route a single hose run between a JET Dust Collector and more distant machines, which can reduce joints that might otherwise interrupt airflow paths.
The Powermatic 4" X 20' Collection Hose from JET Tools, defined as a 4" Diameter Hose for JET Dust Collectors, provides a known 4 inch interface and 20 foot reach for dust collection layouts. Using the 4IN X 20FT HOSE specification and JT9-JW1032 part number connects your order directly to this hose, which supports consistent planning and repeat use in JET Dust Collector systems. For buyers setting up or extending Machinery Dust Collectors installations, this hose offers a clearly defined path length and diameter for routing dust-laden air between woodworking machines and JET Dust Collectors.