
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Jet Tools 708580 JBM-5 Benchtop Mortise Machine gives shops a compact mortising solution that still delivers consistent results on repeat jobs. The machine can be used on a bench or on an independent stand, so it fits into different shop layouts and lets you keep mortising operations where they best support your workflow. Heavy-duty cast iron and steel construction provide durability and stability during use, which helps the chisel stay on line and supports cleaner mortise walls. A powerful 1/2HP motor provides consistently smooth performance, so the cut stays controlled across different hardwoods and work sessions. The column is reversible for mortising larger stock, allowing you to work on bigger frames or posts while still using a benchtop footprint. Together, these details give installers and woodworkers a dedicated mortiser that supports accurate, repeatable joinery.
The JBM-5 bench mortise machine runs on single phase 115V power, so it fits into standard shop electrical layouts without special service. A three-jaw drill chuck keeps a positive grip on mortising bits with up to 3/8 inch diameter shanks, which simplifies bit selection and helps keep the chisel and bit aligned during cutting. Two hinged side doors allow easy access to the drill chuck, so operators can change bits or check grip with minimal downtime between setups. The long, multi-position mortising handle can be repositioned to suit the operator and job, helping maintain controlled feed pressure as stock thickness or height changes. A removable On/Off toggle switch prevents accidental or unauthorized use of the tool, supporting controlled access in shared shop environments while keeping the machine ready for production when needed.
This JBM-5 bench mortise machine sits in the mortising machines class, giving it a focused role for cutting rectangular mortises in woodworking applications. Because the machine can be used on a bench or an independent stand, it works well in small cabinet shops, millwork rooms, or on-site shop spaces where footprint is limited. The reversible column for mortising larger stock allows the same machine to handle door stiles, table legs, or other taller components, which reduces the need for separate dedicated mortising setups. Heavy-duty cast iron and steel construction provides durability and stability during use, so the head stays aligned over the work as you cycle through multiple parts in a project. The 1/2HP motor provides consistently smooth performance, supporting a steady pace across batches of similar mortises without constant adjustment between cuts.
The quick adjust depth stop is designed for uniform mortise depths, which means corresponding tenons can be sized once and used across a full run without chasing individual fit issues. A three-jaw drill chuck keeps a positive grip on mortising bits with up to 3/8 inch diameter shanks, helping the bit stay secure under load and supporting straight-sided mortises over the full depth. Long, multi-position mortising handle design lets operators reposition the feed handle for easier operation and optimum handle position, improving leverage and giving better control over feed rate as the chisel enters and exits the stock. Two hinged side doors allow easy access to the drill chuck, which reduces the time needed to swap bits between different mortise widths and helps keep production moving. The removable On/Off toggle switch prevents accidental or unauthorized use of the tool, supporting predictable startup behavior so that each mortising session begins under controlled conditions.
The Jet Tools 708580 JBM-5 Benchtop Mortise Machine runs on single phase 115V power, so it integrates into typical shop electrical circuits and supports straightforward placement in existing work areas.
The JBM-5 column is reversible for mortising larger stock, allowing taller or wider workpieces to be positioned for cutting while still using the same benchtop machine setup.
The JBM-5 uses a three-jaw drill chuck that keeps a positive grip on mortising bits with up to 3/8 inch diameter shanks, supporting a range of common mortise sizes.
The quick adjust depth stop on the JBM-5 sets uniform mortise depths, so repeated joints match in depth and parts fit consistently across multiple pieces.
The JBM-5 long, multi-position mortising handle lets operators reposition the feed handle for easier operation and optimum handle position, improving leverage and control during cutting.
Two hinged side doors on the JBM-5 allow easy access to the drill chuck, so bit changes and checks are faster, supporting smoother transitions between different mortise setups.
The Jet Tools JBM-5 bench mortise machine pairs a 1/2HP motor with heavy-duty cast iron and steel construction, giving shops a compact mortiser that stays stable under load. With its reversible column for larger stock, quick adjust depth stop, and three-jaw chuck for up to 3/8 inch shank bits, the machine supports accurate, repeatable mortises across a range of project sizes. Using standard single phase 115V power and a bench or stand mounting option, it fits naturally into existing shop layouts. For woodworkers who want a dedicated mortising machine that supports consistent joint quality, the JBM-5 provides a straightforward, job-focused solution.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | JP1791091 Mfr# PM9-1791091 | Powermatic Premium Mortise Chisel & Bit 1/4" | ||||
Sold in: 1 Each | JP1791092 Mfr# PM9-1791092 | Powermatic Premium Mortise Chisel & Bit 5/16" | ||||
Sold in: 1 Each | JP1791093 Mfr# PM9-1791093 | Powermatic Premium Mortise Chisel & Bit 3/8" | ||||
Sold in: 1 Each | JP1791094 Mfr# PM9-1791094 | Powermatic Premium Mortise Chisel & Bit 1/2" | ||||
Sold in: 1 Each | JP1791095 Mfr# PM9-1791095 | Powermatic Premium Mortise Chisel & Bit 3/4" |