
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Powermatic premium mortise chisel and bit is a 3/4 inch hollow chisel and bit set machined from solid bars of carbon steel, so it is built as a matched pair for hollow chisel mortisers. The ground and hardened carbon steel construction provides efficient cutting performance and long life, reducing downtime from frequent sharpening or replacement on the mortising machine. The set has one cutting edge, one spur, and a brad point, so the bit scores, centers, and clears the material in a controlled sequence. That cutting geometry delivers consistently clean cuts with smooth side walls, which matters when tight mortise-and-tenon joints are required. This premium hollow chisel and bit set is designed for mortising machines, so it supports accurate, square holes as part of a repeatable workflow in cabinet or furniture production.
This 3/4 inch Powermatic mortise chisel and bit set is built for use on mortising machines in the mortisers category, so it fits directly into workflows centered on machine-cut mortises. The hollow chisel surrounds the bit, so the pair works together to core out waste and square the corners in a single operation, streamlining setup on mortising machinery. The extra long bit gives additional length for use across different mortisers, which helps when adjusting spindle height or table position on varying machines. Because the set is ground and hardened, the cutting edges are prepared at the factory for efficient performance, supporting predictable feed rates and consistent mortise depth during machine setup.
The Powermatic premium mortise chisel and bit 3/4 inch set is specified within the mortising machines product class, so it is suited to shop environments that rely on mortisers for repeatable joinery. The 3/4 inch sizing focuses the set on mortises that match that width, which is common in heavier cabinet, frame, or furniture members needing wider tenons. Because it is a hollow chisel and bit set, the tool is intended for operations where the chisel defines the square perimeter while the bit removes the core, making it effective for square mortises rather than round holes. The solid-bar carbon steel construction supports this role by providing a rigid chisel body, helping keep mortises straight along their depth in denser material.
This Powermatic premium mortise chisel and bit uses one cutting edge, one spur, and a brad point, so the spur scores the fibers, the brad point locates the cut, and the edge clears material, all working together to control the cut. That geometry helps the mortiser produce consistently clean cuts with smooth side walls, limiting torn fibers that would interfere with tenon fit. The ground and hardened carbon steel further supports edge retention, so the geometry remains effective over longer runs between maintenance cycles. The extra long bit aids compatibility with different mortisers, which means the cutting action can be positioned correctly relative to the hollow chisel on various machine setups. As a premium hollow chisel and bit set, it is intended to deliver truly square cuts, giving dependable mortise walls that support accurate joinery alignment during assembly.
The Powermatic premium mortise chisel and bit is specified as 3/4 inch, so it is suited to machine-cut mortises sized to that 3/4 inch width in joinery layouts.
The premium hollow chisel and bit set combines a hollow chisel and internal bit, so it cores out waste while squaring corners, producing consistently clean cuts with smooth side walls.
The ground and hardened carbon steel provides efficient performance and long life, so the cutting edges resist wear and maintain geometry over extended mortising use.
The Powermatic chisel and bit uses one cutting edge, one spur, and a brad point, so it scores fibers, centers the cut, and clears material in sequence for superior performance.
The extra long bit provides compatibility with different mortisers, offering additional reach and adjustment room when setting cutting depth and alignment on various machines.
This Powermatic premium mortise chisel and bit is listed in the mortisers category and mortising machines product class, so it is intended for use on mortising machinery.
The Powermatic premium mortise chisel and bit 3/4 inch set combines a hollow chisel, extra long bit, and carbon steel construction, so it delivers clean, truly square mortises on mortising machines. The single cutting edge, spur, and brad point geometry supports accurate, smooth-walled cuts that help tight tenons seat properly. With its ground and hardened carbon steel, this PM9-1791095 set is built for efficient performance and long life in production or serious shop use. For mortising work built around a 3/4 inch width, this configuration aligns with the needs of machine-based joinery.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | JP708580 Mfr# JT9-708580 | Jet Tools 708580 JBM-5 Benchtop Mortise Machine 1/2" Capacity 1/2HP Single Phase 115V | ||||
Sold in: 1 Each | JP1791091 Mfr# PM9-1791091 | Powermatic Premium Mortise Chisel & Bit 1/4" | ||||
Sold in: 1 Each | JP1791092 Mfr# PM9-1791092 | Powermatic Premium Mortise Chisel & Bit 5/16" | ||||
Sold in: 1 Each | JP1791093 Mfr# PM9-1791093 | Powermatic Premium Mortise Chisel & Bit 3/8" | ||||
Sold in: 1 Each | JP1791094 Mfr# PM9-1791094 | Powermatic Premium Mortise Chisel & Bit 1/2" | ||||
Sold in: 1 Set | JP1791096 Mfr# PM9-1791096 | Powermatic Premium Mortise Chisel & Bits, SET/4 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | JP1791264K Mfr# PM9-1791264K | Powermatic 717T Mortiser 1HP 1Ph 115/230V |