Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
6 x 1/4 100 grit sanding sleeves from JET Tools provide a 6 inch long by 1/4 inch diameter abrasive sleeve that targets detailed edge and contour sanding where small-diameter contact drums are used. The 100 grit aluminum oxide grain cuts material while leaving a fine, controlled scratch pattern, which supports smoothing after shaping without jumping straight to finishing grits. Being part of the Abrasives and Abrasive Sleeves category under the Sanders product class ties these sleeves directly to spindle and similar sanding setups, so they drop into existing abrasive workflows. Identification by manufacturer part number JT9-575893 helps match this exact sleeve size and grit when ordering or restocking, keeping abrasive selection consistent across multiple machines or operators.
The 6 inch length and 1/4 inch diameter sizing align these sleeves with small spindle or drum positions where tight-radius or narrow-face sanding is required. The sleeves are available from 1/4 inch to 4 inch diameter, so this 1/4 inch size sits at the smallest end of that range, covering the most detailed internal curves. That sizing approach allows sanding operations to scale from very fine contours up through larger radii simply by selecting different diameters from the same sleeve family. Because the sleeves are identified under Abrasives and Abrasive Sleeves for sanders, they integrate into sanding stations that rely on precise diameter matching between sleeve and drum for secure mounting.
The web description defines these aluminum oxide sanding sleeves as perfect for any industrial sanding application, placing them directly into production or shop environments where sanding is part of the daily workflow. Their role within the Sanders product class positions them alongside powered sanding equipment rather than hand-use abrasives, so they operate on machines that benefit from consistent sleeve dimensions and bond strength. The 1/4 inch diameter allows sanding of tight inside curves, narrow edges, and detailed profiles where larger sleeves cannot reach, which helps align machined parts to design shapes in confined areas. With sleeves available from 1/4 inch to 4 inch diameter, jobs that move from fine detail to broad curves can stay within a single abrasive system, improving continuity of cut and finish across different stations. The product is specified to fit JET JBOS-5, JOVS-10, and other brand sanders, so it matches common oscillating spindle and related sanders where spindle diameters must pair correctly with sleeve size for proper running.
The sleeves are spiral bound, creating a helical wrap of abrasive around the spindle that spreads contact evenly along the length, which supports uniform cutting pressure and reduces localized wear marks on workpieces. Resin bonded construction provides maximum grain protection by holding aluminum oxide particles firmly to the tough fiber-backed sleeve, so the abrasive face resists shedding under heavy duty use and maintains a predictable cutting rate. That resin bond and fiber-backed combination helps the sleeve resist tearing when loaded against the drum under industrial sanding loads, supporting longer service life before a change is needed. Because the sleeves are designed for heavy duty use, they align with processes where parts cycle continuously across the spindle, allowing operators to rely on consistent performance throughout production runs. The fit to JET JBOS-5, JOVS-10, and other brand sanders confirms that the sleeve geometry and construction are tuned for powered spindle sanding, where oscillation and rotation place continuous stress on the abrasive surface.
The sanding sleeves measure 6 inches long by 1/4 inch diameter, so they match small spindles used for tight-radius and narrow-edge sanding tasks on compatible sanders.
The sleeves use 100 grit aluminum oxide grain, providing a balanced cut that removes material while leaving a fine surface ready for further sanding steps.
The sleeves are spiral bound, resin bonded, and fiber-backed, so the abrasive wrap stays stable on the drum while the grain is held firmly for heavy duty sanding.
The sleeves fit JET JBOS-5, JOVS-10, and other brand sanders, so they integrate with common spindle sanding machines that use matching 1/4 inch diameter sleeves.
Manufacturer part number JT9-575893 identifies this specific 6 inch by 1/4 inch, 100 grit sanding sleeve configuration, which helps match exact replacements when reordering.
These sleeves are described as perfect for any industrial sanding application, so their grain, bond, and fiber-backed structure align with continuous-duty shop sanding demands.
The 6 inch x 1/4 inch 100 grit aluminum oxide sanding sleeves from JET Tools align with spindle sanding where tight-radius control and repeatable cutting action are needed. Their spiral bound, resin bonded, fiber-backed construction is described for heavy duty use, so they are suited to industrial sanding applications that rely on consistent abrasive performance. With defined fit to JET JBOS-5, JOVS-10, and other brand sanders, these sleeves connect directly to common machines in woodworking and similar shops. For operations that depend on a matched abrasive system from detail work through broader curves, this 1/4 inch sleeve size extends that system into the smallest spindle positions.