Xacta Deluxe Table Saw, 50" Rip 5 hp, 1 Ph - Jet Tools 708677PK

Xacta Deluxe Table Saw 50 Rip For Demanding Cuts

Xacta Deluxe table saw 50 rip describes a 10 inch JET Deluxe XACTA Saw built for serious shop work where accurate ripping and crosscutting repeat all day. The 5 hp, 1 phase motor delivers the power needed for heavier cuts, supporting steady feed rates in dense stock. A Poly-V belt drive system transfers that power smoothly, which helps the blade stay on speed under load and supports cleaner edges. The fully shrouded blade directs debris toward collection, helping keep the cut line clearer during long rips. A deeper table with 26 inch by 30 inch cast-iron wings extends the flat work surface, giving sheet work better support. The 50 inch rip capacity, working with the commercial XACTA Fence II, allows wide ripping in one pass, which reduces handling on large panels.

Work-Ready Details That Support Daily Production

• The Quick release riving knife sits close to the blade and changes quickly, which helps keep kerfs open during ripping and supports smoother material flow between operations.
• The integrated arbor lock holds the arbor still during blade changes, so blades swap faster and seating stays consistent from change to change.
• The upgraded Poly-V belt drive system runs between motor and arbor, reducing belt slip so more motor power reaches the cut and vibration is reduced.
• The fully shrouded blade directs waste toward the 4 inch dust collection port, helping dust collection systems pull debris away from the operator path.
• The 26 inch by 30 inch wings and deeper table extend the cast-iron surface, supporting longer workpieces and helping maintain alignment over the full cut.
• The enclosed cabinet with built-in sealed storage drawer keeps the 12.5 inch by 18 inch by 4 inch compartment protected, so frequently used items remain within arm reach at the saw.
• The on-board fence and miter gauge storage keeps these guiding components at the machine, reducing time spent searching and helping protect alignment surfaces.
• The EXCLUSIVE 50 inch commercial XACTA Fence II with T-square design locks along the rail, helping hold rip settings straight over the full 50 inch capacity.

Table Saw Setup, Rip Capacity, And Cut Control

The JET 10 inch Deluxe XACTA Saw pairs its 50 inch rip capacity with the commercial XACTA Fence II, so the fence rides on a T-square style system that supports straight, repeatable settings across the table. A deluxe miter gauge with adjustable positive stops defines common angles, which helps repeat miter settings when batches repeat across projects. Large soft grip handles on the miter gauge give better control as stock crosses the blade. The 4 inch dust collection port ties into dust collection systems, helping pull debris from the cabinet and away from the operator area. An enclosed cabinet supports this airflow path and helps direct dust to the port during continuous cutting.

How This Xacta Deluxe Table Saw Works In The Shop

Where The JET 10 Inch Deluxe XACTA Saw Excels

The JET Tools Xacta Deluxe table saw uses a 5 hp, 1 phase motor to drive a 10 inch blade, placing it in shops that need cabinet-style cutting capacity from standard single-phase power. The deeper table and 26 inch by 30 inch cast-iron wings back up large panel work, so sheet goods and long solid stock stay supported through the cut. With its EXCLUSIVE 50 inch commercial XACTA Fence II and T-square design, the saw handles wide rips in one pass, which suits cabinet sides, carcass parts, and broader face components. The fully shrouded blade, combined with the 4 inch dust collection port and enclosed cabinet, routes dust toward extraction, supporting a clearer view along the fence and miter path. The built-in sealed storage drawer sized at 12.5 inch by 18 inch by 4 inch keeps small jigs or setup items close to the work zone, which supports frequent adjustments without leaving the machine.

Details That Support Accuracy, Speed, And Repeat Work

The Quick release riving knife allows fast change when moving between through cuts and non-through operations, so safety-related guarding can follow the job with less downtime. Because the riving knife follows the blade path closely, it helps keep material from closing on the blade, which reduces the chance of work binding during straight ripping. The integrated arbor lock holds the arbor during blade changes, so wrenches engage positively and blade swaps stay controlled, which supports consistent clamping of blades and dado sets. A Poly-V belt drive system transfers motor torque with reduced slip, helping the blade stay on speed when feeding thicker material and supporting smoother finishes. The deluxe miter gauge with adjustable positive stops and large soft grip handles lets the operator return to common angles confidently, so repeated miters match across door parts and trim. On-board storage for the fence and miter gauge positions these parts on the saw when not in use, so the reference faces stay protected and ready when production resumes.

Common Questions About The JET Tools Xacta Deluxe Saw

Select The Xacta Deluxe Saw For Focused Shop Work

The JET Tools Xacta Deluxe table saw pairs a 5 hp, 1 phase motor with a 10 inch blade, Poly-V belt drive, and an EXCLUSIVE 50 inch commercial XACTA Fence II to support demanding ripping work. The deeper table, 26 inch by 30 inch wings, and enclosed cabinet with dust collection features position the saw for shops handling larger cabinet and furniture parts. For operations wanting a single-phase cabinet saw that emphasizes rip capacity, dust routing, and quick setup changes, this JET Deluxe XACTA Saw configuration offers a focused solution ready for regular production tasks.