
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Replacement Filter/Collection Bag Kit with 30 Micron for DC-1100/1200 Series Dust Collector is designed as a direct change-out for DC-1100 and DC-1200 series machines, so installers can restore filtration and collection performance without hunting separate parts. The kit is identified by manufacturer part number JT9-708636MF, which ties directly to JET Tools documentation for straightforward ordering and job planning. Listed under 5-MICRON FILTER / CLLCTN BAG KIT DC-1100, it is built for dust collection work where fine particulate control matters during cutting or sanding operations. As part of the dust collection category, it keeps these collectors operating in the performance range they were designed for, supporting cleaner work areas and more predictable machine behavior over time.
The web description states that this kit is for DC-1100VX or DC-1200VX units, so crews running these specific JET Tools collectors can match the kit directly to installed equipment. Because the kit replaces the upper canister and lower bag on those units, technicians can plan a single service stop to renew both filtration and collection capacity in one go. Tying the kit to the DC-1100VX and DC-1200VX models also helps standardize spares for shops with multiple JET Tools machines, since the same part number JT9-708636MF can be stocked and pulled whenever a scheduled dust collector bag change is due.
The product data specifies that this kit is for DC-1100VX and DC-1200VX units, which means it is intended for JET Tools dust collectors already installed in woodworking or similar dust-producing environments. Because it replaces the upper canister and lower bag on these machines, it slots into the existing dust collection path where the fan pushes material into the filter and down into the collection area. Being part of the Dust Collection product class, it is aimed at stationary or semi-stationary setups, such as shop dust systems connected to saws, planers, or sanders that rely on the DC-1100 or DC-1200 series as the main collector.
The naming 5-MICRON FILTER / CLLCTN BAG KIT DC-1100 shows that filtration performance centers around capturing particles in the 5 micron range and smaller within these dust collector systems. This focus makes it particularly relevant in areas of the shop where sanding, routing, or fine machining tasks generate airborne fine dust that would otherwise circulate around workpieces and operators. Because the kit aligns with DC-1100 and DC-1200 series equipment, shops standardized on those collectors can keep replacement strategy simple while still targeting fine dust control where those machines are already ducted.
The web description notes that the filter bag is 98% efficient on 5 micron particles, which has direct impact on how much visible fine dust remains in the air after typical cutting and sanding operations. By capturing nearly all dust at that size at the collector, work zones around connected machines stay clearer between cleanup cycles. The same filter bag is specified as 92% efficient on 3 micron particles, so even smaller fines from abrasive sanding are largely trapped in the filter rather than migrating through the shop, which supports more consistent surface prep and reduces dust settling back onto freshly machined parts.
With 74% efficiency on 1 micron particles, the bag still captures a substantial portion of the very finest dust generated during high-speed or extended sanding tasks, which helps keep internal dust loads in the collector lower over time. The description also states that this kit has much higher filtration efficiency than the 30 micron unit while remaining similar in budget. That combination lets shops that already use DC-1100 or DC-1200 series collectors raise their fine dust capture performance significantly using a like-for-like replacement kit, maintaining existing layouts and ducting while improving how clean the air and surrounding equipment stay across daily use.
The Replacement Filter/Collection Bag Kit JT9-708636MF is specified for JET Tools DC-1100 and DC-1200 series dust collectors, so it matches those units for filter and collection bag replacement.
The kit is described as replacing the upper canister and lower bag on DC-1100VX units, so it refreshes both filtration and collection sections in one planned change.
The filter bag is rated 98% efficient at 5 microns, 92% at 3 microns, and 74% at 1 micron, so it captures a large share of fine sanding and cutting dust at the collector.
The description states this kit delivers much higher filtration efficiency than the 30 micron unit at a similar budget, so shops can step up fine dust capture without changing collector models.
The product is in the Dust Collection class and Machinery Dust Collectors category, so it is intended for use on DC-1100 and DC-1200 series dust collection systems in typical dust-producing operations.
The label indicates a 5 micron-rated filter and collection bag kit tailored to DC-1100 series dust collectors, defining both its filtration focus and its target equipment line.
This Replacement Filter/Collection Bag Kit with 30 Micron for DC-1100/1200 Series Dust Collector is purpose-matched to JET Tools DC-1100 and DC-1200 series units, so selection lines up directly with existing equipment. With the kit replacing both the upper canister and lower bag, a single planned change restores the dust path to the stated 98% efficiency on 5 micron particles, 92% on 3 micron, and 74% on 1 micron. For shops wanting much higher filtration efficiency than a 30 micron unit at a similar budget level, this 5-MICRON FILTER / CLLCTN BAG KIT DC-1100 provides a straightforward way to raise fine dust control while keeping the same dust collector line in service.
Sold In: 1 Kit