Jet Tools 708659K DC-1100VX-CX Dust Collector with 2-Micron Canister Kit 1-1/2HP Single Phase 115/230V
Description
Jet DC-1100VX Dust Collector For Shop Dust Control
Jet DC-1100VX dust collector is a single-stage dust collection machine built for economical and quiet operation, so it supports regular use in a woodworking or machinery shop without adding unnecessary noise. The unit features JET Tools Vortex Cone, which improves chip separation to prevent clogging of the filter, giving more consistent airflow while collecting debris. That Vortex Cone also increases packing efficiency of the collector bag, so the bag holds more material before changeout. The system uses a 1-1/2HP single phase 115/230V motor, giving it the power to maintain high air velocity CFM that stands up to competitive specifications during demanding cuts. Industrial controls are designed for years of durable use, which helps the machine handle continuous-duty workdays. Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty, supporting long dust collection runs in an active shop.
Key Dust Collector Details That Support Daily Work
- The exclusive Vortex Cone improves chip separation, keeping larger chips out of the filter so airflow stays steadier during extended cutting or sanding sessions.
- The same Vortex Cone increases collector bag packing efficiency, letting each bag hold more waste before changeout to cut interruptions.
- A high air velocity CFM design stands up to competitive specifications, so the collector keeps pulling chips effectively across typical machine hookups.
- Industrial controls are designed for years of trouble-free use, giving a familiar on-off interface that stands up to repeated daily operation.
- Permanently lubricated, totally enclosed, fan-cooled motors rated for continuous-duty support long runtimes without extra maintenance steps between jobs.
- Single-stage design gives economical, quiet operation, helping the collector run in the background while other shop work continues.
- Collection bags use a snap ring connection, allowing fast installation and removal when swapping out full bags between tasks.
- Quick-connect collection bags with an elastic band speed bag changes further, so downtime between runs stays short.
- Four casters provide maneuverability and total portability, allowing the dust collector to be rolled to different machines as workflows change.
Dust Collector Setup, Mobility, And Bag Handling
This JET Tools dust collector runs on single phase 115/230V power, fitting typical shop electrical service while delivering 1-1/2HP for dust collection. The single-stage layout supports economical installation because airflow and separation happen in one housing. Four casters under the base provide maneuverability, so the machine can be positioned next to different tools instead of staying fixed in one location. Collection bags connect with a snap ring and quick-connect elastic band, which reduces the time required for bag installation and removal when full. The Vortex Cone inside the housing improves chip separation before material reaches the filter, cutting down on filter clogging and helping airflow stay consistent between bag changes. With industrial controls designed for years of use and a continuous-duty, totally enclosed, fan-cooled motor, the collector is set up to run through long sessions without stopping the cut to rest the machine.
Using The DC-1100VX-CK Dust Collector In The Shop
Where This Single-Stage Dust Collector Fits Best
This DC-1100VX-CK dust collection system fits machinery and dust collection setups in woodworking or similar shops that need consistent chip removal from machines. The high air velocity CFM design stands up to competitive specifications, so it supports connection to typical shop equipment that generates chips and fine dust. Because it is a single-stage collector, separation and filtration happen in one unit, which suits spaces that need effective collection without multi-stage layouts. The 1-1/2HP motor, operating on 115/230V single phase power, gives the performance needed for continuous-duty operation across a workday. Casters under the base make the unit portable within the shop, so it can be positioned near whichever machine is currently in use rather than being tied to a fixed duct line. With JET Tools dust collection design and a canister filter rated at 2-micron, the unit addresses fine dust needs alongside chip collection.
How Vortex Cone And Motor Design Support Results
The Vortex Cone chip separation feature improves how chips are directed into the collector bag, which reduces premature filter clogging and keeps suction steadier while machines are running. Increased bag packing efficiency from that Vortex Cone means each bag cycle removes more material before changeout, reducing interruptions in machining sequences. The high air velocity CFM dust collector layout is built to stand up to competitive specifications, giving installers and shop managers confidence that airflow capacity matches demanding processes. Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty, so the collector can stay on across multiple cuts or sanding passes without pause. Industrial controls designed for years of trouble-free use keep operation straightforward, even in busy environments. The quiet, economical single-stage design helps the collector work in the background, supporting cleaner machines and workpieces during production runs.
Dust Collector Questions From Shop Installers And Users
What type of dust collection system is the DC-1100VX-CK?
The DC-1100VX-CK is a single-stage dust collector, combining separation and filtration in one unit, which simplifies layout while providing economical and quiet operation for shop use.
How does the Vortex Cone chip separation help in daily use?
The Vortex Cone improves chip separation and bag packing efficiency, so the filter clogs less often and each bag holds more debris, reducing interruptions during cutting or sanding work.
What power and motor rating does this JET Tools dust collector have?
This JET Tools dust collector uses a 1-1/2HP single phase 115/230V motor rated for continuous-duty, supporting long dust collection sessions in a typical shop electrical setup.
How does the 2-micron canister benefit dust collection?
The 2-micron canister filter works with the Vortex Cone to handle fine dust while chips are separated, which supports cleaner air during extended woodworking or machining operations.
How portable is the DC-1100VX-CK in a shop layout?
The DC-1100VX-CK has four casters that provide maneuverability and total portability, so it can be rolled between machines as workflows or job setups change.
How are collection bags attached and changed on this unit?
Collection bags use a snap ring and quick-connect elastic band for attachment, allowing fast installation and removal when full bags need to be swapped during production work.
Select The DC-1100VX-CK For Shop Dust Collection Needs
The DC-1100VX-CK dust collection system from JET Tools combines a 1-1/2HP single phase continuous-duty motor, Vortex Cone chip separation, and a 2-micron canister to support steady collection across busy shop schedules. High air velocity CFM performance stands up to competitive specifications, while the quiet, economical single-stage design fits well in production or serious DIY environments. With industrial controls, maneuverable casters, and quick-connect snap ring collection bags, this unit is structured for regular use in woodworking and machinery shops that prioritize consistent dust control. Select this Jet DC-1100VX dust collector when looking to align shop dust collection capacity with everyday cutting, sanding, and machine operation demands.
