Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Lathe bed extension for JWL-20EXT lets you increase the turning capacity of compatible JET JWL-1440, JWL-1640, and JWL-1840 lathes to 60 inches between centers, which matters when you need to handle longer spindles, posts, or trim pieces in one setup. This JET Tools extension mounts on the end of the lathe bed, so it effectively lengthens the working area without changing your primary machine layout. When more swing is needed instead of length, it can mount down on the leg of the lathe to add 18 inches to the diameter of the workpiece, giving more room for larger bowls or platters in the same footprint. The JET JWL-20EXT extension is designed to fit JET JWL-1440VS, JWL-1640EVS, JWL-1840EVS, and JWL-1840DVR lathes, providing a defined match so setups stay consistent. It will not work on the JWL-1442VS or JWL-1642EVS models, which keeps model selection clear for planning shop layouts.
This JWL-20EXT 20 inch EXT BED with post mounts directly to the end of the compatible JET JWL lathe bed, so the spindle centerline continues straight across into the added section for steady tailstock alignment. When mounted on the bed end, the setup provides up to 60 inches between centers, giving turners a continuous support path for longer stock without adding separate stands. The extension can also mount down on the leg of the lathe to increase the diameter capacity of the workpiece by 18 inches, which shifts the cutting zone lower and allows turning of significantly larger blanks. This mounting flexibility lets shops configure the same extension for either long-spindle work or larger-diameter turning, depending on the job mix scheduled for the lathe.
This JET Tools lathe bed extension is used with JET JWL-1440VS, JWL-1640EVS, JWL-1840EVS, and JWL-1840DVR lathes, so it integrates into existing JET turning lines that already rely on these variable-speed models. By extending the turning capacity of JET JWL-1440, JWL-1640, and JWL-1840 lathes to 60 inches between centers, it supports work such as stair spindles, long furniture components, and architectural parts within one continuous setup on the same lathe. When the extension is mounted down on the leg to add 18 inches to the diameter of the workpiece, it shifts the use case toward wide platters, deep bowls, or other large forms that need additional swing. The identified JWL-20EXT 20 inch EXT BED with post configuration gives shops a defined way to assign one machine for both long and large turning, using position choices on the same extension.
Because this extension mounts on the end of the bed, the added length becomes a straight continuation of the original ways, which supports tailstock and tool rest alignment when turning up to 60 inches between centers. Having a stated 60 inch capacity lets shops plan job routing, since any work within that length can run on the configured JET JWL lathe without reworking support fixtures. Mounting down on the leg to add 18 inches to the diameter of the workpiece changes the geometry toward swing capacity, which lets the same lathe handle larger blanks while keeping the headstock and controls unchanged. The fit callout for JET JWL-1440VS, JWL-1640EVS, JWL-1840EVS, and JWL-1840DVR lathes clearly links part JT9-719401 to specific machines, helping buyers assign the correct extension to each lathe on the floor. The statement that it will not work on JWL-1442VS or JWL-1642EVS further separates the intended applications, which reduces confusion when multiple JET models operate in the same shop.
The JWL-20EXT 20 inch EXT BED with post fits JET JWL-1440VS, JWL-1640EVS, JWL-1840EVS, and JWL-1840DVR lathes, so it ties directly into those specific JET variable-speed turning platforms.
The lathe bed extension increases the turning capacity of JET JWL-1440, JWL-1640, and JWL-1840 lathes to 60 inches between centers, allowing longer workpieces to be turned in one setup.
Mounted on the end of the bed, the extension continues the original ways, so tailstock and tool rest can support up to 60-inch work while keeping the headstock location unchanged.
When mounted down on the leg, the extension adds 18 inches to the diameter capacity of the workpiece, allowing larger bowls or platters to be turned on the same JET lathe.
This JET Tools 719401 lathe bed extension will not work on JWL-1442VS or JWL-1642EVS lathes, keeping those models separate from this capacity upgrade.
The manufacturer part number is JT9-719401, which identifies this specific JWL-20EXT 20 inch EXT BED with post for matching to ordering and service documentation.
The JWL-20EXT 20 inch EXT BED with post from JET Tools gives compatible JWL-1440, JWL-1640, and JWL-1840 lathes up to 60 inches between centers or 18 inches more diameter when mounted on the leg, so one machine can cover larger turning jobs. With clear fit to JWL-1440VS, JWL-1640EVS, JWL-1840EVS, and JWL-1840DVR lathes, and defined exclusion of JWL-1442VS and JWL-1642EVS models, this JT9-719401 extension provides a specific way to expand turning capacity in a JET-focused shop.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  JP719400K Mfr# JT9-719400K | Jet Tools 719400K JWL-1440VSK 14" X 40" Wood Lathe with legs | ||||
Sold in: 1 Each |  JP719400 Mfr# JT9-719400 | Jet Tools 719400 JWL-1440VS 14" X 40" Benchtop Wood Lathe |