
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Infeed/Outfeed Tables for JWDS-1632 extend the working surface of the JWDS-1632 and JWDS-1836 sanders, so boards stay supported as they enter and leave the drum. This added support helps keep long or heavy stock tracking more consistently through the machine. The tables are built as sturdy extensions for drum sanders in the JET Tools JWDS line, giving the operator a larger reference surface during sanding passes. When the table length increases, the workpiece has more contact area with the sander bed, which helps maintain flatter results over the length of the board. These infeed and outfeed tables are purpose-designed for the JWDS-1632 and JWDS-1836 models, so they match the sander width for predictable alignment in a woodworking shop.
The infeed/outfeed tables are built for the JWDS-1632 and JWDS-1836 sanders, so their dimensions and layout suit those machines for straightforward mounting. When the 18 inch by 10-1/4 inch tables are fixed at the sander entry and exit, they create a 40 inch overall surface that supports stock as it passes the drum. Having that extended surface in line with the drum sander bed allows operators to guide boards with less effort, which is especially useful when feeding multiple similar parts. The sturdy construction described for these tables supports repeat passes on the same setup, helping maintain a stable workflow during sanding runs.
The tables are intended for the JWDS-1632 and JWDS-1836 drum sanders from JET Tools, placing them directly in woodworking shops that use these machines for surfacing and finish sanding. By extending the table surface to 40 inches, they create a longer path in front of and behind the drum, which helps when working with wide cabinet parts, door components, or similar pieces that benefit from straight, even support. Each 18 inch by 10-1/4 inch section forms a stable platform at either end of the sander, giving the operator more control over how each board approaches the drum. This size keeps the extension useful without overwhelming space around the machine, so the sander can still fit into existing shop layouts.
Because these tables are described as sturdy, they are suited to repeated use in a drum sanding workflow where many boards move across the same surfaces. That sturdiness helps the tables resist flex as stock loads onto the infeed and off the outfeed, which supports consistent sanding thickness from one part to the next. The matched design for the JWDS-1632 and JWDS-1836 models keeps the working width aligned with the drum, so parts stay supported across their full sanding width during operation.
Extending the sander table length to 40 inches gives operators more contact between the workpiece and the machine bed, which helps maintain flatter, straighter parts during sanding passes. The longer surface supports both the leading and trailing ends of each board as it crosses the drum, reducing the tendency for stock to dip when it first meets or leaves the abrasive. This matters when sanding pieces that must stay uniform for later assembly, such as panels, rails, or similar components.
The 18 inch by 10-1/4 inch dimensions of each table balance working support with compact size, which allows installers to position the sander so that infeed and outfeed zones remain clear while still expanding usable surface. With sturdy construction tailored to the JWDS-1632 and JWDS-1836, these tables help keep the machine setup repeatable from job to job, so operators can run similar parts with consistent handling and feed support.
The JT9-723521 infeed/outfeed tables are designed for the JWDS-1632 and JWDS-1836 sanders, so they match these machines for width and layout during sanding operations.
The JET Tools infeed/outfeed tables extend the drum sander surface to 40 inches, giving longer support for boards before and after they pass under the drum.
Each JWDS infeed or outfeed table measures 18 inches by 10-1/4 inches, providing a compact extension area that still adds meaningful support at each end of the sander.
The infeed/outfeed tables extend the surface to 40 inches, so longer stock stays supported as it enters and exits, helping reduce tipping and uneven sanding at the ends.
The infeed/outfeed tables are described as sturdy, which supports repeated use in sanding workflows where boards load and unload across the extensions.
The tables extend the JWDS-1632 and JWDS-1836 surfaces, so boards remain supported through the pass, helping maintain consistent handling and sanding results.
The infeed/outfeed tables for JWDS-1632 and JWDS-1836, part number JT9-723521, extend the JET Tools drum sander surface to 40 inches using two sturdy 18 inch by 10-1/4 inch sections. That added length supports stock before and after the drum, which helps maintain consistent sanding passes when working with longer or heavier pieces on these specific JWDS models.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | JP723520K Mfr# JT9-723520K | Jet Tools 723520K JWDS-1632 Drum Sander with Open Stand 1-1/2HP Single Phase 115V | ||||
Sold in: 1 Each | JP723530K Mfr# JT9-723530K | Jet Tools 723530K JWDS-1836 Drum Sander with Open Stand 1-3/4HP Single Phase 115V |