
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Jet Tools 723520K JWDS-1632 Drum Sander is a drum sander and open stand setup designed for finish sanding panels and parts. The sander uses a drum with sealed and permanently lubricated ball bearings, which supports longer service life in a busy shop. A tool-less parallelism system lets you correct conveyor bed alignment by turning an external dial, so you can bring the conveyor and drum into parallel without disassembly. The worktable is positioned with the same parallelism dial, which streamlines small adjustments during sanding runs. An infinitely variable conveyor speed up to 10 feet per minute lets you choose feed rate for different woods and grit choices. The Sandsmart feature monitors drum motor load and reacts to prevent overload situations, protecting the motor during demanding passes.
The conveyor bed parallelism adjustment uses a dial on the outside of the bed, so you correct taper or uneven sanding without reaching into the machine. Because no tools are required, small corrections can be made between passes rather than during lengthy teardown. The same parallelism dial positions the worktable, linking table height changes to a single adjustment method that keeps operation consistent. Variable conveyor speed up to 10 feet per minute lets you slow the feed when sanding difficult grain and increase speed when running consistent stock. With Sandsmart monitoring drum motor load, the system reacts to changing conditions and helps protect the motor as feed rate and stock thickness vary.
The JWDS-1x32 drum sander design suits sanding panels and parts where an effortless finish is important. Its conveyor bed parallelism adjustment lets you process wider workpieces and keep thickness consistent across the width, which is useful when preparing components before assembly. The open stand supports the machine at a working height suited to feeding longer stock, keeping the drum and conveyor accessible from the front. The mirrored dust hood shape directs chips and dust into the 4 inch collection port, helping maintain visibility at the drum area during operation. By preventing chips from getting between the workpiece and the finish, the hood design supports smoother surfaces ready for subsequent finishing steps.
The tool-less parallelism system matters because drum-to-conveyor alignment directly affects sanding uniformity across a run of parts. Adjusting parallelism with a dial on the outside of the bed lets you correct small deviations quickly, helping keep repeat work within tolerance. The drum rides on sealed and permanently lubricated ball bearings, which reduces bearing service work and supports consistent drum tracking over extended use. Infinitely variable speed control up to 10 feet per minute allows matching feed rate to grit and stock hardness, so you can control cut aggressiveness and surface quality on each pass. Sandsmart monitoring of drum motor load adds protection when conditions change during a feed, which is useful when grain variation or thickness variations occur. Together, these features help the JWDS-1632 drum sander deliver an effortless finish while supporting predictable, repeatable results in production or project environments.
The Jet Tools 723520K JWDS-1632 is a drum sander on an open stand, which uses a rotating drum and conveyor bed to bring panels and parts to a consistent sanded finish.
The JWDS-1632 uses a tool-less parallelism system with a dial on the outside of the conveyor bed, so alignment between drum and conveyor is set from a single control point.
The Sandsmart feature on the JWDS-1x32 drum sander continuously monitors the drum motor load and responds to prevent an overload situation, protecting the motor in demanding work.
The infinitely variable speed control up to 10 feet per minute lets you choose slower or faster conveyor feed rates, which tunes material removal and finish quality for different projects.
The mirrored dust hood matches the drum shape and directs chips and dust into the 4 inch collection port, keeping debris off the workpiece surface during sanding.
The drum uses sealed and permanently lubricated ball bearings, which reduces bearing maintenance and supports consistent drum rotation over extended service life.
The Jet Tools 723520K JWDS-1632 Drum Sander with open stand pairs a tool-less parallelism system with variable-speed feed to support controlled sanding across different projects. Sealed and permanently lubricated ball bearings and Sandsmart load monitoring focus on steady operation during repeated passes. The mirrored dust hood with 4 inch collection port manages chips and dust away from the workpiece surface, supporting an effortless finish. For shops needing a drum sander setup that emphasizes adjustment control and finish consistency, this JWDS-1x32 configuration provides the key functions required for panel and part sanding.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | JP723521 Mfr# JT9-723521 | Infeed/Outfeed Tables for JWDS-1632 & JWDS-1836 - Jet Tools 723521 | ||||
Sold in: 1 Each | JP723541 Mfr# JT9-723541 | Folding Infeed/Outfeed Tables for JWDS-2244 - Jet Tools 723541 | ||||
Sold in: 1 Each | JP723552 Mfr# JT9-723552 | Digital Readout (DRO) for JWDS-2550 & JWS-2244OSC - Jet Tools 723552 | ||||
Sold in: 1 Each | JP723553 Mfr# JT9-723553 | Depth Stop Assembly for JWDS-2244 & JWDS-2550 - Jet Tools 723553 |