Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
TS29 shaper 7.5HP 3PH 230/460V describes a Powermatic Tools shaper built around a TS29 sliding table, so the machine is aimed at shops needing steady support when moving workpieces through shaping cuts. The sliding table travels a full 49-1/4 feet, which gives you a long stroke for handling larger panels or longer stock in a controlled path across the cutter area. The large table with built-in slider provides a broad working surface, helping operators stage and guide work without juggling extensions. A fully adjustable fence with dual digital readout positioning and micrometer adjustments lets you dial fence location precisely, which supports repeatable shaping passes and small changeovers between profiles. The tilting spindle offers additional angles beyond vertical, allowing angled or compound shaping setups when a straight spindle would limit the profile options.
The TS29 shaper uses a 7-1/2 hp motor configured for 3 phase, 230/460 volt power, so it is aimed at shops with three-phase service capable of supporting heavier-duty shaping operations. This motor specification supports demanding cuts where maintaining spindle speed under load is important for surface quality. Forward and reverse spindle operation with a lighted indicator gives a clear visual confirmation of spindle direction, which helps align cutter rotation to the intended feed direction. The five available spindle speeds create options for matching rotation to cutter diameter and material demands. The part is identified as Powermatic Tools model 1791284 with manufacturer part PM9-1791284, tying the shaper into Powermatic Tools documentation and product references during installation and setup.
The TS29 sliding table travels a full 49-1/4 feet, so shops handling longer rails, panels, or moulding blanks can move stock across the cutter without awkward repositioning. The large table with built-in slider sets up a stable work zone around the spindle, which helps during patterns, cope-and-stick work, or other operations where the workpiece needs consistent support. The fully adjustable fence with dual digital readout positioning lets operators see settings from both sides of the cutter zone, which is useful when switching between reference faces or changing setups on either fence wing. Micrometer adjustments give a fine-tuning layer to that fence movement, making it easier to creep up on a target profile rather than jumping past the desired dimension.
The tilting spindle provides additional angles beyond a fixed vertical position, which supports work that needs beveled or compound edge shaping in one pass instead of relying only on jigs. Five spindle speeds in forward and reverse extend that flexibility by allowing rotation settings that better match cutter geometry, which affects cut quality and cutter feel in the material. The lighted indicator on the spindle controls gives a quick reference to the active speed and direction, which simplifies verifying the machine state before feeding stock. Powermatic Tools branding and the specific TS29 configuration signal a shaper that is structured for sliding-table workflows rather than only fixed-table feeding.
The TS29 shaper is defined by its sliding table traveling a full 49-1/4 feet and a large table with built-in slider, which together support controlled movement of longer or larger workpieces during shaping.
The fully adjustable fence has dual digital readout positioning, so both fence sides display settings, helping operators return to known positions and mirror setups around the cutter.
Micrometer adjustments on the fence allow very fine movement of the fence position, which helps dial in precise cut locations for profiles and joints without overshooting the target.
The tilting spindle provides additional angles beyond vertical, enabling angled or beveled shaping setups, so more complex edge or face profiles can be produced on the shaper.
The TS29 shaper is specified as 7-1/2 hp, 3 phase, 230/460 volt, which aligns it with shop environments that use three-phase power for heavier-duty woodworking machinery.
Five spindle speeds in forward and reverse with a lighted indicator let operators select speed and direction to suit cutter style and material, while quickly seeing the active setting.
The Powermatic Tools TS29 shaper, configured as a 7-1/2 hp, 3 phase, 230/460 volt machine, combines a long-travel sliding table with a fully adjustable fence and tilting spindle, so it is oriented to shops that value controlled work handling and precise fence positioning. The five spindle speeds in forward and reverse, supported by a lighted indicator, give operators choices for matching spindle behavior to different cutters and materials. For operations where panel length, fence accuracy, and angled shaping capability are central, the TS29 configuration brings these functions together under a single Powermatic Tools model, identified as 1791284 and PM9-1791284.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  JP1791205 Mfr# PM9-1791205 | Powermatic 1" Spindle for PM2700 Shaper |