Adjustable Pins, 2"

Adjustable Pins 2 Inch For Gang Lock Systems

Adjustable Pins 2 inch from CompX Timberline are adjustable pins designed for use with gang lock cylinder bodies in a drawer lock system, so they connect the locking cylinder body to multiple drawers in a unified lock run. The AP-200 designation identifies these pins as a specific part within the CompX Timberline drawer lock system, so they match the system layout documented around that part number. Because these are adjustable pins for use with gang lock cylinder bodies, they allow the locking bar relationship to be tuned to the drawer stack so the lock bar meets each drawer reliably. The 2 inch length gives a defined reach within the drawer lock system, which supports predictable spacing between the cylinder body and the engaged drawer members in standard gang lock layouts.

Key Details That Support Drawer Lock Layouts

• The adjustable pins for use with gang lock cylinder bodies allow the pin position to be set relative to the cylinder body, which supports aligning the lock connection to the drawers in a controlled way.
• The 2 inch designation on these adjustable pins defines the working length of the pin in the drawer lock system, so designers and installers can plan lock bar routing and drawer engagement points around that reach.
• The product is classified as part of a drawer lock system in the locks and latches, gang locks, cylinder bodies category, so it is aligned with multi-drawer gang locking arrangements rather than single-point cabinet locks.
• The AP-200 manufacturer part number ties the adjustable pin directly to CompX Timberline documentation and component references, which supports consistent selection when matching other named parts in the same drawer lock system.

Adjustable Pin Fit Within Gang Lock Assemblies

This CompX Timberline AP-200 adjustable pin works as a connecting element within a drawer lock system, so it sits between the gang lock cylinder bodies and the moving lock components that interact with drawers. Because it is specifically described as adjustable, the pin allows position changes along its engagement path, supporting fine-tuning of drawer alignment to the cylinder body in a bank of drawers. The 2 inch length defines the scale of the engagement distance, which matters when laying out drawer depths and the relative position of the cylinder body in a cabinet side or divider. Since it is part of a locks and latches gang locks cylinder bodies grouping, its dimensions and function are oriented around multi-drawer locking where several drawers operate from one lock action.

Using The AP-200 Adjustable Pin In Drawer Runs

Where This Adjustable Pin Fits In Drawer Systems

The AP-200 adjustable pin operates in a drawer lock system that uses gang lock cylinder bodies, so it is positioned as part of the linkage between the lock cylinder and the drawers it controls. In this role, the 2 inch pin length works inside the cabinet between structural members and drawer hardware, giving a defined distance for translating cylinder rotation into drawer locking motion. Because these pins are for use with gang lock cylinder bodies, they sit in a system where a single key action can secure multiple drawers in a stack, and the pin contributes to organizing that shared motion path. Being categorized under locks and latches with gang locks and cylinder bodies means the pin is meant to sit near the cylinder location, so the surrounding hardware is planned around that central lock body.

Why AP-200 Details Matter For Repeatable Locking

The AP-200 identifier marks these adjustable pins as a specific CompX Timberline component, which matters when repeating drawer lock layouts across projects because the same geometry and adjustment behavior can be expected each time. The adjustable nature of the pin provides the ability to set engagement distances between the gang lock cylinder bodies and the drawers, supporting consistent locking performance when drawers vary slightly within a cabinet run. With a 2 inch length, the installer or designer can treat that measurement as a fixed design element in the drawer lock system, so each cabinet drawing can locate cylinder bodies and drawer members using the same known reach. As part of a drawer lock system grouping, this pin supports repeatable multi-drawer locking because its role and dimensions stay constant wherever an AP-200 is specified.

Common Questions About The AP-200 Adjustable Pin

Selecting The AP-200 Pin For Drawer Lock Runs

The CompX Timberline Adjustable Pins 2 inch AP-200 serve as defined elements in a drawer lock system using gang lock cylinder bodies, so choosing this part number aligns the pin length and adjustment behavior with that system. Because these are adjustable pins for use with gang lock cylinder bodies, they support organizing multi-drawer lock runs where a shared cylinder body manages several drawers. When a project calls for a drawer lock system component that bridges gang lock cylinder bodies to drawers at a 2 inch reach, selecting the AP-200 adjustable pin matches that design intent and supports consistent layouts across similar cabinets.