Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
T614 wireless door sensor is a magnet-activated control that switches compatible LED lighting on or off based on cabinet door movement, so lighting responds automatically at the door instead of at a wall switch. Tresco Lighting designs this sensor as part of its LED lighting accessories line, which keeps it aligned with typical cabinet and casework lighting layouts in shops and built-ins. The compact 1-13/16 inch size keeps the sensor small enough to place inside common cabinet rails and stiles without crowding other hardware, which helps preserve usable space. The black finish allows the body to visually blend into darker interiors, which reduces visual distraction when the door is open. As a wireless unit, it removes the need for control wiring runs between door and cabinet sides, which simplifies planning around hinges and existing channels.
This wireless door sensor adheres to the inside of the cabinet door using double-stick adhesive, which sets the control point exactly where the magnet can meet the sensor body without drilling into the door. The magnet that triggers the sensor is positioned so it aligns with the sensor body as the door closes, which places the active switching zone at the edge of the opening where movement is most consistent. Because communication to the lighting system runs through a separate receiver, the sensor requires at least one L-WLDSREC-1 receiver to operate, which centralizes the connection to the LED lighting runs instead of tying wiring directly to the door.
This Tresco Lighting wireless door sensor is designed as an LED lighting accessory, which places it naturally into cabinet, closet, and casework projects where integrated LED runs are already specified. The 1-13/16 inch body suits face-frame or frameless cabinets with enough stile or panel depth to accept a small adhered component, which helps on both new builds and retrofit interiors. Because the unit is activated by a magnet, the working pair of sensor and magnet can be located at the top, bottom, or side of a door opening, as long as the magnet approaches the sensor body as the door closes, which offers flexibility in dealing with hinges, shelves, or organizers. Its black color ties in especially well with darker interiors, which keeps the control hardware visually quiet in display cabinets or work storage where the focus is on contents and lighting.
The absence of cumbersome, messy wires inside cabinetry comes from its wireless communication design, which removes the need to route small control cables through drilled holes or shallow channels in doors and cabinet walls. This saves layout time and also leaves more uninterrupted surfaces for lighting channels, organizers, or future adjustments. Simple push-button pairing with the receiver allows the installer to program each sensor to the correct L-WLDSREC-1 receiver on site, which streamlines commissioning when several cabinets share the same workspace. The ability to program up to four sensors to a single receiver means that multiple doors along one cabinet run can all manage the same light circuit, which reduces the number of receivers required and centralizes response for corner units or long wall cabinets. Requiring at least one matching receiver keeps the wiring concentrated at that receiver location, so power and LED leads terminate in a predictable point while the CR2025 battery-powered sensor and magnet stay localized at the door. This division between wireless door control and wired lighting connection supports cleaner layouts in both small and large cabinet installations.
The T614 wireless door sensor is part of Tresco Lighting LED lighting accessories, so it is intended to control compatible LED lighting runs in cabinet and similar installations.
The wireless door sensor is activated by a magnet, so when the door-mounted magnet moves relative to the sensor, it triggers the connected LED lighting through the paired receiver.
The wireless door sensor adheres to the inside of the cabinet door using double-stick adhesive, which establishes the control position without drilling into the door material.
The wireless door sensor works through an L-WLDSREC-1 receiver, which accepts up to four paired sensors and relays their signals to the LED lighting circuit.
The wireless door sensor can be programmed so up to four sensors communicate with a single L-WLDSREC-1 receiver, allowing multiple doors to operate one lighting run.
The T614 wireless door sensor uses a long-lasting CR2025 battery, which lets the control unit operate wirelessly at the door without low-voltage power cabling.
This T614 wireless door sensor in black from Tresco Lighting delivers magnet-activated LED control at the door using a compact, 1-13/16 inch wireless module and dedicated L-WLDSREC-1 receiver pairing. The adhesive-mounted design sets the sensor on the interior door surface, while the separate receiver concentrates wiring at a fixed point tied to the LED runs. For cabinet and casework projects where light should respond directly to door movement and interior faces need to stay clean, this wireless door sensor and receiver approach offers a focused control option that keeps wiring paths and control points clearly separated.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RSL-WLDSREC-1 Mfr# L-WLDSREC-1 | T616 12V/24V Wireless Door Sensor Receiver, 3.25", Silver |