T614 Wireless Door Sensor, 1-13/16", Nickel

T614 Wireless Door Sensor For Cabinet Lighting

T614 Wireless Door Sensor gives you wireless door-activated control of Tresco Lighting LED setups, so opening or closing a cabinet door directly controls the light without running switch wires through the casework. The sensor is activated by a magnet, which means the door movement becomes the switch action at the hinge side or strike side where you position the pair. The 1-13/16 inch sensor size keeps the component compact inside the cabinet, which helps keep the lighting control out of the way of stored items. A long-lasting CR2025 battery powers the sensor, avoiding any tie-in to line voltage wiring or LED drivers at the installation point. Simple push-button pairing with the correct receiver links the sensor to the lighting control channel, so installers can quickly assign the door to the intended lighting zone.

Wireless Door Sensor Details That Speed Jobs

• Allows light to be controlled by multiple doors, so a bank of cabinet doors can run the same lighting zone from several openings without adding separate wired switches at each opening.
• Simple push-button pairing with the matching receiver lets you sync the sensor to the control unit quickly, reducing setup time when you are commissioning several doors on one run.
• The design supports programming up to four sensors to a single L-WLDSREC-1 receiver, which lets multiple doors on one cabinet run share one control point while still reacting independently at each door.
• No cumbersome, messy wires to have to hide inside your cabinetry, which keeps interiors cleaner and avoids drilling or routing channels just to chase low-voltage switch wires.
• Activated by a magnet adhered to the door with double-stick adhesive, so the trigger point is driven by normal door travel instead of a mechanical plunger or hardwired switch body.
• Three stick-on magnet covers in black, brown, and white let you match the magnet location to common interior colors, helping the installation visually blend with different cabinet finishes.

Wireless Sensor And Receiver Setup For Control

The T614 Wireless Door Sensor pairs by push button with the compatible L-WLDSREC-1 receiver, so the installer creates the link between door and lighting control right at the cabinet. Programming up to four sensors to a single L-WLDSREC-1 receiver allows several doors across one cabinet run or section to operate the same LED lighting, which is useful for longer wall runs or wider pantry layouts. Because the sensor has no cumbersome, messy wires to route, the fitting process focuses on placement and pairing rather than drilling wire paths. The magnet-activated trigger lets you fine-tune actuation by locating the magnet so the light turns on and off at the desired point in the door swing.

Using The Wireless Door Sensor In Cabinet Projects

Where The T614 Wireless Door Sensor Fits Best

The T614 Wireless Door Sensor from Tresco Lighting is designed for LED lighting accessories applications, so it fits naturally into cabinet, closet, or casework projects where LEDs are already specified. Because it allows light to be controlled by multiple doors, it suits multi-door wall cabinets, tall cabinets, or wardrobe-style enclosures where several access points share one lighting zone. The compact 1-13/16 inch form factor keeps the sensor discreet inside the cabinet interior, leaving shelf and storage space largely unaffected by the control hardware. The magnet activation with stick-on magnet covers in black, brown, and white gives flexibility to place the magnet on different interior surfaces while keeping the appearance coordinated with typical cabinet colors. Powered by a long-lasting CR2025 battery, the sensor continues working without tying into the LED power loop, which keeps the lighting layout focused on driver and fixture placement rather than switch feeds.

How Wireless Features Support Repeatable Lighting Results

The T614 Wireless Door Sensor having no cumbersome, messy wires inside your cabinetry means each installation avoids running low-voltage switch leads, which simplifies repeatable layouts on multi-unit jobs. Simple push-button pairing with the L-WLDSREC-1 receiver lets installers follow the same pairing sequence from cabinet to cabinet, supporting consistent results across an entire kitchen or bank of casework. The ability to program up to four sensors to a single L-WLDSREC-1 receiver lets repeated cabinet modules share a single receiver location, which can streamline receiver placement and reduce the number of control components needed in a run. Magnet activation lets you set the on/off point consistently by aligning the magnet to a known door position, helping different doors in a project behave the same way at the same swing angle. Three color options for the magnet covers support visually consistent results when repeating the detail against different interior finishes in one build.

Key Questions About This Wireless Door Sensor

Selecting The T614 Sensor For Cabinet Lighting Control

The T614 Wireless Door Sensor, 1-13/16 inch, Nickel, from Tresco Lighting is built as an LED lighting accessory for door-activated cabinet lighting control. Its wireless, magnet-activated trigger and long-lasting CR2025 battery support clean interior layouts while still reacting directly to door movement. Simple push-button pairing and capacity for up to four sensors on one L-WLDSREC-1 receiver provide flexibility for multi-door runs. For cabinetmakers and installers standardizing on Tresco Lighting components, this sensor offers a repeatable way to tie door action to the lighting zone.