Dynabrade Dynafine replacement pad gives a Dynabrade user a 3-1/8 x 2-7/8 inch triangular pad sized for detail sanding, so corners and tight areas can be worked with consistent contact across the abrasive. The medium density 3/8 inch thick pad balances firmness and give, so the abrasive stays supported on flats yet can conform to slight contours in wood or other surfaces. The non-vacuum design keeps the pad solid, which maintains full support under the disc in applications where dust extraction through the pad is not required. Self-skinning urethane foam construction provides a resilient support layer, so the pad can handle repeated abrasive changes while keeping its shape. The hook and loop face lets abrasives attach and release quickly, so changing grits during a job stays efficient from coarse shaping to final smoothing.
The non-vacuum hook and loop pad uses a short nap hook face, so standard hook and loop abrasive sheets can be applied and removed repeatedly without damaging the foam body. The pad mounts with four screws, creating a rigid connection between the pad and the tool, so the sanding motion from the Dynabrade sander transfers directly to the abrasive without slippage. The medium density 3/8 inch thick construction works as a controlled cushion, so installers and finishers can lean on the pad enough for stock removal while still maintaining a consistent scratch pattern across the full pad area.
This triangle sanding replacement pad in a 3-1/8 x 2-7/8 inch format fits work where a compact pad can reach edges, corners, and smaller faces, so it suits detail sanding and finishing operations. The category of sanders and accessories places it within power sanding setups, so it works as the contact surface between Dynabrade Dynafine tools and hook and loop abrasives. The self-skinning urethane foam medium pad supports sanding across a wide range of grits, from coarse to ultra fine, so one pad style can stay on the sander as abrasives are changed to move from leveling to final surface preparation. The non-vacuum construction is suited to sanding where dust extraction through the pad face is not used, so the full pad area remains uninterrupted foam behind the abrasive.
The medium density 3/8 inch thick pad helps keep abrasive pressure even, so the scratch pattern remains uniform when moving across rails, stiles, or panel fields during woodworking and similar tasks. The short nap hook face material on the non-vacuum hook and loop pad holds discs flat to the surface, so edges of the abrasive are less likely to lift and cause uneven sanding. Mounting with four screws fixes the pad securely to the Dynabrade sander, so the pad tracks true with the tool motion and resists twisting under side load. The self-skinning urethane foam body resists tearing at the surface while staying flexible underneath, so repeated grit changes and ongoing use can be carried out while keeping a consistent backing quality behind the abrasive. Handling coarse to ultra fine grit abrasives on the same pad reduces setup changes, so workflows from rough sanding through final touch-ups can stay focused on grit selection rather than changing pad types.
The Dynabrade Dynafine replacement pad measures 3-1/8 x 2-7/8 inches, so it covers small surfaces and corners while remaining compact for detail sanding work.
The pad is 3/8 inch, or 10 mm, thick in medium density, so it offers a balance of cushioning and firmness for controlled material removal and surface blending.
The pad uses self-skinning urethane foam, so the outer surface forms a durable skin while the interior remains resilient to support the abrasive during sanding.
The non-vacuum hook and loop pad has a solid face, so the entire abrasive area contacts the surface, and dust is not routed through the pad during operation.
The short nap hook face grips hook and loop abrasives securely yet releases them easily, so changing from coarse to ultra fine grits is fast during a job.
The Dynabrade 57951 replacement pad mounts with four screws, so the connection to the sander stays firm and maintains pad alignment while sanding.
The Dynabrade Dynafine replacement pad in self-skinning urethane foam, medium density, and 3-1/8 x 2-7/8 inch triangle format gives a defined backing for hook and loop abrasives from coarse to ultra fine grits. With its 3/8 inch thickness, non-vacuum structure, and four-screw mounting, it supports steady, predictable sanding on detail areas. Choose this Dynabrade 57951 replacement pad when a compact, medium density non-vacuum hook and loop pad is needed to keep sanding changes quick while maintaining consistent surface results.
Sold In: 1 Each