Dynabrade Dynafine Replacement Pad No Hole is a 3-3/4 x 2-3/8 inch non-vacuum hook and loop pad that supports sanding jobs where dust extraction holes are not required, so abrasives stay in full contact with the surface during use. The pad is 3/8 inch (10 mm) thick, which provides a balance of cushioning and control as you move across edges, profiles, or flat work. Its medium density construction gives enough firmness to keep abrasives cutting evenly while still conforming to minor contours. The pad uses premium self skinning urethane foam, so the working surface stays smooth while the foam underneath absorbs pressure during sanding passes. This structure provides optimum support and flexibility for a wide range of sanding applications with coarse to ultra fine grit abrasives, so one pad can stay on the tool through multiple grit changes. The hook and loop face works with compatible abrasives for quick swaps between grits during staged sanding.
The pad mounts with four screws, giving a firm mechanical connection that holds steady under sanding pressure on powered tools. This fixed mounting style helps maintain a consistent pad plane, which supports even abrasive contact across the full 3-3/4 x 2-3/8 inch surface. The short nap hook face material on the pad engages the loop backing of compatible abrasives, so discs or sheets attach securely yet release cleanly when changed. Because the pad is non-vacuum and has no holes, the hook and loop interface spreads across the full face, which supports uniform grip on abrasives from coarse to ultra fine grits. The 3/8 inch (10 mm) thick medium density build ties the tool, pad, and abrasive together into one responsive unit that handles both leveling work and finer finishing passes.
This 3-3/4 x 2-3/8 inch Dynabrade Dynafine replacement pad serves sanding applications where a compact, controlled contact area is preferred, such as smaller panels, parts, or trim pieces. The non-vacuum design suits setups that do not route dust through the pad, so the full face can be devoted to abrasive grip. Premium self skinning urethane foam construction supports use with coarse to ultra fine grit abrasives, allowing one pad to stay on the sander while abrasives change as the work progresses. The 3/8 inch (10 mm) thickness adds enough cushioning to follow slight surface variations, which supports blending between passes without harsh transitions. Medium density behavior lets the pad support more aggressive cuts when paired with coarse abrasives, while still backing finer grits for smoothing and refining surfaces. Over repeated sanding cycles, the smooth urethane skin helps the pad glide while the underlying foam handles pressure.
The pad mounts with four screws, so its position on the tool body remains consistent each time it is installed, supporting repeatable results from one job to the next. That secure mounting works together with the 3-3/4 x 2-3/8 inch footprint to maintain a stable sanding face that is easy to track along edges or tight areas. The short nap hook face material allows for quick and easy abrasive changes, helping maintain a steady workflow when stepping through coarse to ultra fine grits on the same piece. Because the pad is 3/8 inch (10 mm) thick and medium density, it cushions the abrasive enough to reduce digging at high spots while still transferring tool motion directly to the work. The self skinning urethane foam provides optimum support and flexibility, which helps distribute contact pressure across the pad so the abrasive cuts more evenly and surfaces stay more uniform across passes.
The Dynabrade Dynafine replacement pad measures 3-3/4 x 2-3/8 inches, which supports controlled sanding on smaller work areas and detailed components.
The pad is 3/8 inch (10 mm) thick, giving a balance of cushioning and control so abrasives can level and blend surfaces without cutting too harshly.
The pad supports a wide range of sanding applications with coarse to ultra fine grit abrasives, so it can back both stock removal and finishing steps.
The short nap hook face material allows quick and easy abrasive changes, which keeps sanding progress moving when switching grits on the same tool.
The pad mounts with four screws, creating a solid mechanical connection that holds steady during sanding and supports consistent contact with the workpiece.
The non-vacuum, no-hole design leaves the full pad face available for hook and loop contact, helping abrasives grip uniformly across the surface.
The Dynabrade Dynafine Replacement Pad No Hole 3-3/4 x 2-3/8 inch non-vacuum hook and loop pad uses premium self skinning urethane foam, 3/8 inch (10 mm) thickness, and medium density to support sanding with coarse to ultra fine grit abrasives. Its short nap hook face material allows quick abrasive changes, while four-screw mounting keeps the pad secure on the tool. For sanding setups that match these dimensions and interface details, this pad offers a focused way to back multiple abrasive grits through leveling, blending, and finishing stages.
Sold In: 1 Each