Dynabrade Dynafine Replacement Pad is a 3/8 inch thick, medium density pad that supports controlled material removal while backing the abrasive evenly, which helps maintain a consistent scratch pattern on woodworking and similar surfaces. The 6-hole configuration is designed for vacuum use, so it channels dust away from the work area during sanding and supports clearer visibility along the sanding path. The PSA backing style works with pressure-sensitive adhesive abrasives, allowing the abrasive to bond firmly to the pad for steady contact during operation. As a replacement pad, this Dynabrade part lets you restore the sanding face of compatible tools to a fresh, flat surface, which supports repeatable finish quality over ongoing use. The medium density construction balances conformity and support, helping the pad follow surface contours while still backing the abrasive with predictable firmness.
The 3/8 inch thick pad structure supports a defined interface between the tool and the abrasive, helping the sander track steadily across panels or workpieces. Medium density behavior lets the pad compress slightly under load, which can smooth out minor surface variation while still holding the abrasive flat enough for controlled stock removal. The 6-hole vacuum layout routes dust through the pad face toward the connected extraction path, which helps limit dust buildup at the sanding contact point. Because the pad uses a PSA configuration, abrasives with pressure-sensitive adhesive backing can be applied directly to the pad surface and pressed into place, creating a uniform bond across the contact area. As a replacement pad within the Dynabrade Dynafine line, it restores the sanding interface when the original pad face is worn, helping maintain consistent contact and finish results.
This Dynabrade 58045 replacement pad is part of the Dynafine system, so it is intended for use on tools designed for medium density, 3/8 inch thick pads with a 6-hole vacuum pattern and PSA abrasives. The 6-hole arrangement allows connection to vacuum-capable sanding setups, channeling dust through the pad face during operation. In woodworking environments, the medium density build gives a balance between following profiles and supporting flat panels, which is useful when moving between varied pieces on the same sanding station. The defined thickness also keeps the sanding face at a predictable distance from the sander interface, helping operators anticipate tool behavior from one pad change to the next. By matching pressure-sensitive adhesive abrasives, the pad supports quick disc changes while maintaining firm backing over the full pad area.
The 3/8 inch thickness and medium density work together to control how force is transferred from the sander to the work surface, which helps keep sanding pressure more even across the pad. This helps reduce localized over-sanding and supports a more uniform finish pattern on the material. The vacuum-ready 6-hole configuration continually pulls dust away from the abrasive face, which keeps more abrasive grain exposed for cutting and supports steadier removal rates over the life of each PSA disc. The PSA-specific design allows the abrasive to adhere across the pad surface rather than at isolated points, reducing the chance of edge lift and helping the disc track cleanly. As a defined Dynabrade Dynafine replacement pad, the 58045 designation provides a clear reference when matching pads to existing Dynabrade setups, which supports consistent tool performance across pad changes.
The Dynabrade Dynafine Replacement Pad is 3/8 inch thick, which sets a stable backing height that helps control how the sander contacts the work surface during sanding.
The medium density pad compresses moderately under load, allowing some conformity to the surface while still supporting the abrasive for controlled stock removal and finish consistency.
The 6-hole vacuum layout channels dust through the pad during sanding, helping keep the abrasive face clearer and supporting more consistent cutting action.
The Dynabrade Dynafine Replacement Pad is configured for PSA, so it is used with pressure-sensitive adhesive abrasives that bond directly to the pad surface.
Dynabrade 58045 identifies this specific Dynafine replacement pad configuration, which helps match the correct pad style when servicing Dynabrade sanding tools.
The replacement pad restores a fresh, flat 3/8 inch medium density backing, helping sanding tools maintain predictable contact and finish quality as original pads wear.
The Dynabrade Dynafine Replacement Pad combines a 3/8 inch thick profile, medium density material, and a 6-hole vacuum pattern to support controlled sanding in dust-extracting setups. The PSA-specific face is ready for pressure-sensitive adhesive abrasives, giving a firm bond across the pad during operation. As Dynabrade part 58045 within the Dynafine line, it serves as a direct replacement pad that restores the sanding interface on compatible tools to a known, consistent configuration. For woodworking and similar sanding work that relies on steady finish quality, this pad offers an identified Dynabrade option built around medium density support and vacuum-ready dust management.
Sold In: 1 Each