Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade Extreme Orange foam abrasive pad is a hand sanding pad built around high performance aluminum oxide abrasive bonded directly onto proprietary polyurethane foam with 100 percent solids adhesive. That bond holds the abrasive to the foam during use, so the pad keeps working through the job instead of shedding grain early. The extremely sharp and friable P-graded aluminum oxide abrasive produces a fast cutting action under light pressure, which lets you remove material efficiently without bearing down and marking the work. This pad is described as coarse 60 to 80 grit, so it targets heavier stock removal and surface preparation rather than ultra-fine finishing. The 4 inch by 3 inch pad size fits comfortably in the hand, giving good control along edges and profiles during sanding.
The premium loop scrim laminated to the foam for easy attachment and removal from hook and loop pads lets you use this pad on a compatible hook and loop backing during sanding. That interface lets you attach the 4 inch by 3 inch pad quickly, then strip it off just as quickly when you move to another grit. The coarse 60 to 80 grit character combined with the extremely sharp and friable P-graded aluminum oxide abrasive means that, under light pressure, the pad cuts quickly without dragging, which helps when leveling surfaces or removing coatings. The proprietary orange urethane foam provides the correct firmness while remaining flexible, so it supports the grain during cutting yet still bends enough to follow slight curves and transitions.
This abrasive pad sits in the Abrasives and Hand Sanding category and the Abrasive Pads and Sponges product class, so it is oriented toward manual surface preparation and leveling. The coarse 60 to 80 grit description means it works where you need significant material removal, such as breaking down rough surfaces or preparing them for finer grits. The proprietary orange urethane foam provides the correct firmness to enable the abrasive grain to cut yet provides flexible support, so on flat sections it acts firm enough to keep the surface even, while on uneven surfaces it flexes to follow contours. The foam structure allows the product to conform to uneven surfaces, so profiles, moldings, and transitions can be worked without leaving untouched low spots.
The high performance aluminum oxide abrasive bonded directly onto proprietary polyurethane foam with 100 percent solids adhesive keeps the abrasive layer tied to its backing through repeated strokes, so the pad continues to cut predictably instead of losing grain in patches. The extremely sharp and friable P-graded aluminum oxide abrasive produces a fast cutting action under light pressure, so operators can let the grit work without heavy force, which supports more uniform scratch patterns. Premium loop scrim laminated to the foam for easy attachment and removal from hook and loop pads allows rapid pad swaps while maintaining a secure hold during sanding, supporting a steady workflow across multiple parts. Together, the foam support, adhesive bond, and hook and loop interface help the abrasive maintain consistent material removal and finish throughout the life of the product.
The Dynabrade Extreme Orange foam abrasive pad is described as coarse 60 to 80 grit, so it targets heavier cutting and initial surface preparation rather than final finishing.
The extremely sharp and friable P-graded aluminum oxide abrasive produces a fast cutting action under light pressure, so it removes material efficiently while maintaining a consistent scratch pattern.
The proprietary orange urethane foam provides the correct firmness for the abrasive grain to cut yet remains flexible, so the pad both levels flatter areas and follows uneven surfaces.
This foam abrasive pad uses premium loop scrim laminated to the foam for easy attachment and removal from hook and loop pads, so it connects quickly to compatible hook and loop backers.
The Dynabrade Extreme Orange foam abrasive pad is described as 4 inches by 3 inches, which provides a compact hand-friendly size for controlled sanding.
The high performance aluminum oxide abrasive is bonded directly onto polyurethane foam with 100 percent solids adhesive, so the grain stays anchored and the pad remains effective longer.
This Dynabrade Extreme Orange coarse 60 to 80 grit aluminum oxide foam abrasive pad brings a 4 inch by 3 inch format, proprietary orange urethane foam, and premium loop scrim for hook and loop pads together to support controlled, fast-cutting hand sanding on flat and uneven surfaces.
Sold In: 24 Each