1/4 Dynaswivel double pivot flow control air line connector from Dynabrade is a universal-joint that connects portable air tools to an air line, providing a controlled, swiveling link between the hose and the tool for better handling on the job. The double-pivot design swivels 360 degrees at two pivot points, allowing the air hose to drop toward the floor while the joint redirects movement at the tool, so the hose pulls less during grinding, sanding, or fastening work. The built-in finger-tip air-flow control dial adjusts flow at the connector, so air delivery can be tuned to the connected tool without walking back to the regulator. A thread size of 1/4 inch NPT matches common air line and tool ports in many shops, supporting straightforward integration into existing air systems. Non-marring composite construction protects contacted surfaces during use, which benefits finished or delicate workpieces.
The Dynaswivel air line connector uses a 1/4 inch NPT thread size, so it matches a common air line and tool port standard, reducing transition fittings in many setups. The recommended torque value of 28-30 newton meters for installation defines the tightening range at the threaded joint, supporting a secure seal while respecting the connector design. The maximum operating pressure rating of 150 PSIG identifies the upper pressure limit for use in an air system, which ties connector performance to the compressor and regulator settings on the line. An air flow range up to 46 SCFM describes the flow capacity at the connector, aligning its use with air tools whose consumption falls within this range for consistent performance.
The Dynaswivel is described as a universal-joint that connects portable air tools to an air line, so it acts as the flexible link between hose and tool in a shop air system. By swiveling 360 degrees at two pivot points, the connector lets the hose pivot both at the tool and along the line, so hose tension is redirected through the joint rather than through the operator's grip. This movement pattern allows the air hose to drop directly toward the floor while still feeding the tool, which helps keep the working area cleaner of hose loops when moving across benches or around fixtures. As an air line fitting in the air line components and air line fittings product class, it integrates directly into compressed air setups where portable tools need more freedom of movement around cabinets, fixtures, or assemblies.
The finger-tip air-flow control dial on the Dynaswivel allows the operator to adjust air flow at the connector, so flow to the tool can be tailored for specific operations while staying at the work position. This local control supports quick changes in tool aggressiveness when moving between tasks that prefer different air delivery, using the same primary air line. The non-marring composite construction provides a surface that will not mark workpieces in typical contact, which is useful when the connector brushes against finished panels, doors, or trim during tool repositioning. The maximum operating pressure of 150 PSIG and air flow capacity up to 46 SCFM tie the connector's operating window directly to many compressed air system capabilities, aligning performance with a wide range of portable air tools drawing flow within that range.
The Dynaswivel connector acts as a universal-joint between portable air tools and an air line, improving maneuverability while maintaining air flow to the tool during use.
The two 360 degree pivot points let the hose drop toward the floor and pivot at the tool, which reduces hose drag and helps maintain smoother tool movement across the work area.
The finger-tip air flow control dial adjusts air delivery through the connector, allowing quick tuning of tool response directly at the joint during different tasks.
This air line connector uses a 1/4 inch NPT thread size, which aligns with many standard air tool and hose connections in shop air systems.
The Dynaswivel connector has a maximum operating pressure of 150 PSIG, tying its intended use to air systems running at or below that pressure.
The connector is rated for an air flow range up to 46 SCFM, aligning it with portable air tools whose consumption fits within that flow capacity.
The Dynabrade 1/4 inch Dynaswivel double pivot flow control air line connector brings a universal-joint link, a 1/4 inch NPT thread, and local air-flow control into one fitting, aligning well with portable tools that benefit from reduced hose drag and on-connector flow adjustment. With 360 degree swivel at two pivot points, non-marring composite construction, a 150 PSIG maximum operating pressure, and an air flow range up to 46 SCFM, it fits into many compressed air systems where tool maneuverability and surface protection matter. Select this connector when a controlled, swiveling interface between air line and portable air tool supports the way the work is done.
Sold In: 1 Each