3/8 Dynaswivel aluminum air line connector is a Dynabrade air line fitting that swivels 360 degrees at two pivot points, so the connected air hose can drop directly to the floor and stay out of the working area for better hose control. The 3/8 inch NPT connection size ties directly into air line setups that already use 3/8 NPT threads, so the fitting matches common shop plumbing without adapters in many systems. The aluminum and stainless steel construction provides a metal-bodied connector for typical compressed air environments, giving a solid connection between hose and tool. The 26 to 45 SCFM air flow rating ties to air delivery needs in that range, supporting tools that operate within those flows. A maximum operating pressure of 150 PSIG covers many standard shop air systems, matching typical regulated line pressures for air tools.
The 3/8 inch NPT thread on the DYNASWIVEL, ALUMINUM, 3/8 NPT connects directly to components that use 3/8 NPT, shaping how installers tie the swivel between hose and air line. Because the unit swivels 360 degrees at two pivot points, orientation during installation affects how the hose hangs, guiding installers to position it so the air hose can drop toward the floor. The 150 PSIG maximum operating pressure defines the pressure range this fitting is designed to handle, so users align it with air systems that operate at or below that level. With an air flow rating of 26 to 45 SCFM, the connector is suited to tools and lines that fall in that consumption band, helping maintain consistent air delivery through the connection.
The DYNASWIVEL, ALUMINUM, 3/8 NPT functions as an air line component between the hose and the rest of the system, and its 360 degree rotation at two pivot points lets the hose follow tool movement while tending to drop toward the floor. That two-pivot swivel action changes the way the hose behaves at the connection point, so the hose can move more freely as tools are repositioned during work. Because the connector is rated for 26 to 45 SCFM air flow, it pairs with tools and lines that demand air within that range, supporting sanding, fastening, or other pneumatic work that falls in that consumption band. The 150 PSIG maximum operating pressure works within typical compressed air system ratings, allowing the connector to sit in standard regulated shop air circuits without exceeding its pressure specification. The aluminum and stainless steel build means the connector uses metals common in air line fittings, which supports repeated connection and disconnection between air components in daily shop routines.
The 3/8 inch NPT sizing on this Dynabrade air line fitting matters because many air hoses and outlets use the same thread, so installers match that thread size when planning where this swivel will live in the run. When the connector swivels 360 degrees at two pivot points, it changes the hose bend radius at the fitting, which can reduce strain at the tool or drop line during frequent direction changes. By operating in the 26 to 45 SCFM range, the swivel supports airflow levels that many mid-consumption pneumatic tools require, which helps tools receive the volume needed for consistent performance. The 150 PSIG maximum operating pressure provides a defined upper limit that corresponds with common shop supply pressures, fitting into regulated systems designed around that range. Using aluminum and stainless steel in the construction establishes a metal interface that holds up to the mechanical demands of connecting and rotating air lines in woodworking and similar shop environments.
The DYNASWIVEL, ALUMINUM, 3/8 NPT is a Dynabrade air line fitting that swivels 360 degrees at two pivot points, functioning as a rotating connector between air hose and line.
The 3/8 Dynaswivel aluminum air line connector uses a 3/8 inch NPT thread, which matches air line components built around standard 3/8 NPT connections.
The swivel turns 360 degrees at two pivot points, allowing the hose to drop to the floor and follow tool movement, which reduces hose twisting at the connection.
The air line fitting has a maximum operating pressure of 150 PSIG, aligning it with many standard regulated shop air systems running at similar pressures.
The connector is rated for 26 to 45 SCFM air flow, which matches pneumatic tools and lines that operate within that consumption range for proper air delivery.
The Dynabrade air line fitting uses aluminum and stainless steel, giving a metal construction suitable for repeated use in typical compressed air shop environments.
The DYNASWIVEL, ALUMINUM, 3/8 NPT connects 3/8 inch NPT air lines to tools while providing 360 degree swivel movement at two pivot points, so the hose tends to hang toward the floor during work. With a 26 to 45 SCFM air flow rating and a 150 PSIG maximum operating pressure, it fits many shop air setups that run tools in that airflow and pressure range. The aluminum and stainless steel construction offers a metal-bodied connector for daily air line use. For air line components for tools that need controlled hose movement and standard 3/8 NPT threading, this Dynabrade air line fitting is suited to that role.
Sold In: 1 Each