1/4" Flow Control Air Line Connector

1/4" Flow Control Air Line Connector For Dynabrade

1/4" Flow Control Air Line Connector describes a fingertip-adjustable connector that manages air supply to pneumatic tools, so installers can set airflow at the tool instead of walking back to a regulator while dialing in performance. This connector is specified for use with Extreme Dynorbital Sanders X51, X61, and X62, so technicians working with those sanders can match the connector directly to the tools named in the product data. The connector is built as a 1/4" NPT flow control connector, which means it ties into common 1/4" NPT air hose and tool ports used in many sanding setups, simplifying hookup in an existing compressed air line. The part is identified as Dynabrade 95756, giving shops a precise reference when matching prints, service notes, or previous orders for the same connector.

Key Air Line Details That Support Sander Use

• The fingertip flow control design lets the operator adjust air delivery at the connector, which helps match air flow to sanding tasks without returning to a central regulator during surface prep work.
• The connector is specified for Extreme Dynorbital Sanders X51, X61, and X62, so users of those sanders can select this part knowing it is called out for that tool family in the product information.
• The 1/4" NPT flow control connector interface fits 1/4" NPT threaded connections, which supports straightforward installation into many existing shop airline layouts and typical sander hose setups.
• The connector supports up to 25 SCFM air flow, providing capacity for air delivery within that rating so the connected sander can operate within its intended airflow range in normal shop use.
• The body is chrome plated brass, so the fitting combines brass construction with a chrome plated surface that contributes to a hard-wearing exterior in typical compressed air line environments.

Air Line Connector Fit And Installation Details

The connector is described as a 1/4" NPT flow control connector, so both the inlet and outlet end of the fitting are configured around 1/4" NPT threading that ties into standard air hose and tool ports. The SAP description identifies the configuration as a coupler 1/4" female and plug 1/4" male combo, which means one side presents a 1/4" female connection while the opposite side presents a 1/4" male connection for joining line and tool. Dynabrade lists airflow capacity as up to 25 SCFM, so installers setting up sanders within that air demand can route supply through this connector as part of the overall compressed air system. Aligning the connector with the Extreme Dynorbital Sanders X51, X61, and X62 naming in the web description helps users pair the fitting to those tools in a repeatable way.

Using This Dynabrade Air Line Fitting In The Shop

Where This Flow Connector Fits Into Sander Setups

The Dynabrade air line connector is described as a fingertip flow control connector for use with Extreme Dynorbital Sanders X51, X61, and X62, so it slots into the air path serving those sander models in sanding or finishing stations. Its 1/4" NPT flow control connector specification means the fitting threads to 1/4" NPT ports on hoses or tools, letting the connector sit close to the sander handle or at a convenient point in the whip line. The SAP description identifies a coupler 1/4" female and plug 1/4" male combo configuration, which positions one end as a 1/4" female connection ready to receive a 1/4" male thread while the other end presents a 1/4" male thread for mating to a corresponding female side. In practice this layout lets the connector bridge from supply hose to tool connection using the 1/4" NPT interface that appears across many pneumatic sanding setups.

Details That Help Control Airflow And Consistency

The fingertip flow control function on this connector gives the operator direct control of airflow right at the fitting, which supports quick adjustments when moving between surfaces or abrasives with Extreme Dynorbital Sanders X51, X61, and X62. Dynabrade specifies up to 25 SCFM air flow for this connector, so within that capacity the fitting passes air while the flow control feature lets the user trim volume, aiding consistent performance during extended sanding runs. Chrome plated brass construction provides a brass base with a chrome plated exterior, so the connector offers metal threads and a plated surface that stand up to repeated hose changes and handling in typical woodworking and finishing environments. The manufacturer part number 95756 ties all of these details together under a single identifier, making it easier for shops to reorder the same flow control connector when standardizing their Extreme Dynorbital sander air hookups.

Common Questions About This Flow Control Connector

Selecting This Connector For Your Dynabrade Setup

The 1/4" Flow Control Air Line Connector from Dynabrade combines 1/4" NPT threading, fingertip flow control, and a coupler 1/4" female and plug 1/4" male combo layout, so it fits naturally into many pneumatic sander hose assemblies. Its specified use with Extreme Dynorbital Sanders X51, X61, and X62 gives shops a clear match when setting up or standardizing those tools. With airflow capacity up to 25 SCFM and chrome plated brass construction, this connector supports regular compressed air use in woodworking and finishing areas. For shops running Dynabrade Extreme Dynorbital sanders within these parameters, this connector offers a part-numbered option, Dynabrade 95756, for aligning tool hookups across multiple workstations.