Formica 9428-99 Copper Stainless Metal gives you a metal-finish laminate sheet that pairs real aluminum or copper with a phenolic back, so you can bring metal appearance into interior work while still working with standard laminate fabrication tools and methods. The 48" x 120" size supplies a continuous panel for taller walls or casework runs, reducing seams in vertical layouts. The 0.040 inch (1.0 mm) thickness provides a solid feel on the surface, which supports consistent bonding to properly prepared substrates on interior jobs. As part of the DecoMetal metal laminate line, this sheet uses polished, anodized, matte, brushed, or mirror aluminum or copper surfaces over the phenolic core to deliver a metal look ready for interior vertical applications.
This DecoMetal metal laminate is engineered specifically for vertical interior applications, so it is suited to wall panels, vertical casework faces, and other upright decorative surfaces where metal appearance is needed without horizontal wear demands. The 48" x 120" format aligns with common panel and cabinet layouts, allowing installers to size pieces from a single sheet for multiple adjacent surfaces. The phenolic back supports adhesion to appropriate substrates, so bonded panels stay stable after fabrication. With a 0.040 inch (1.0 mm) overall thickness, the laminate integrates into standard high-pressure laminate workflows for trimming, flushing, and detailing around reveals and edges.
This Formica 9428-99 Copper Stainless Metal sheet is designed for vertical interior applications, which makes it suitable wherever a metal visual is specified on upright surfaces, such as wall cladding zones or vertical elements of built-ins. The 48" x 120" sheet size lets fabricators cut full-height sections for many commercial or residential interiors from one piece, which is useful when aligning grain or directional metal finishes across a run. Because the DecoMetal laminate uses polished, anodized, matte, brushed, or mirror aluminum or copper over a phenolic back, it provides a metal-facing layer that integrates with interior design palettes that call for copper or stainless-type tones on vertical planes.
The phenolic back is engineered to prevent creasing, so fabricators can handle and move the sheet during layout and bonding while the surface remains smooth, which is important for reflective metal finishes. Improved adhesion from the phenolic back supports dependable contact with the chosen substrate, which benefits panel longevity once installed. The 0.040 inch (1.0 mm) thickness positions this sheet within familiar laminate handling practices, so cutting, routing, and fitting operations follow established high-pressure laminate workflows.
The combination of aluminum or copper sheet with a phenolic back in this DecoMetal metal laminate is built to keep the metal face supported, so the surface stays more resistant to creasing during fabrication, which is especially important when producing larger 48" x 120" panels. That phenolic back also offers an adhesive-ready surface, promoting even bonding across the panel, which helps the finished assembly remain flat after curing in vertical interior settings. The defined 0.040 inch (1.0 mm) thickness gives installers a known edge profile to work with, which aids in planning reveals, corners, and transitions where metal laminate meets other materials.
Because the product is engineered for vertical interior applications, its characteristics are aligned with decorative wall or casework use rather than high-abrasion horizontal surfaces, so specifiers can match this sheet to appropriate project locations. The variety within the DecoMetal family - polished, anodized, matte, brushed, or mirror aluminum or copper sheet over the phenolic core - allows designers to select specific metal looks while relying on the same basic handling and adhesion characteristics, which simplifies coordination across multiple areas of a project using the same laminate construction.
Formica 9428-99 Copper Stainless Metal is supplied as a 48" x 120" sheet, which provides coverage for tall or wide vertical interior surfaces from a single panel.
Formica 9428-99 Copper Stainless Metal has a Grade 85, 0.040 inch (1.0 mm) thickness, giving a substantial laminate profile suited to standard high-pressure laminate fabrication methods.
This DecoMetal laminate uses a polished, anodized, matte, brushed, or mirror aluminum or copper sheet bonded to a phenolic back, creating a supported metal surface for vertical interior use.
The Formica DecoMetal phenolic back is designed to prevent creasing and to improve adhesion to substrates, supporting smooth, stable vertical interior panels after fabrication.
Formica 9428-99 Copper Stainless Metal is engineered for vertical interior applications, aligning it with wall panels and upright decorative casework surfaces.
The Copper Stainless description reflects that the DecoMetal surface uses aluminum or copper sheet in finishes such as polished, anodized, matte, brushed, or mirror for a metal-style look.
Formica 9428-99 Copper Stainless Metal, in a 48" x 120" Grade 85 sheet, offers a DecoMetal metal laminate engineered for vertical interior applications with a phenolic back that supports both crease resistance and improved adhesion. The 0.040 inch (1.0 mm) thickness works within standard laminate shop workflows, allowing this aluminum or copper-faced sheet to be cut, routed, and bonded as part of your regular high-pressure laminate process. For projects calling for a copper or stainless-style metal look on vertical interior surfaces, this laminated construction provides a defined size, thickness, and backing design that support consistent installation results.
Sold In: 1 Sheet