EPCO stainless steel bow pull is a 5-1/16 inch (128 mm) center to center cabinet handle designed for straightforward mounting on doors and drawers using the 128 mm hole spacing. The stainless steel material provides a solid metal gripping surface, which supports confident daily use on frequently opened cabinet fronts. A stainless steel finish matches the base material, so the appearance stays consistent anywhere this pull is used on a project. The pull has a 6 inch length, giving a comfortable span for one- or two-finger operation on smaller doors. Its 1-1/4 inch projection sets the handle out from the surface enough for a full hand grip, helping users open cabinets without knuckles rubbing the face. With a width of 0.394 inch, the bar presents a slim profile, which suits modern cabinet layouts while still giving defined edges to grab.
This 128mm center to center cabinet pull relies on a fixed 5 inch (128 mm) mounting spread, which lets installers align it with jigs or drilling guides used for other 128 mm pulls. The 6 inch overall length leaves slight overhang beyond the hole centers on each side, which helps visually center the pull on the rail or drawer front. A 1-1/4 inch projection defines the stand-off from the cabinet surface, so installers can predict clearance between the pull and adjacent doors, walls, or trim. The 0.394 inch width gives a slim bar that sits close to the door edge yet still reads as a distinct handle, aiding layout on narrow faces. With a defined center to center dimension and consistent bar proportions, the pull supports repetitive drilling and mounting across multiple units in a run.
This EPCO Arch Series 5-1/16 inch (128 mm) center to center stainless steel pull fits cabinet doors and drawers that are drilled on a 128 mm pattern, which is common in many contemporary and European-style layouts. The stainless steel construction aligns well with projects that specify metal pulls throughout, so runs of wall and base cabinets can share the same hardware line. With a 6 inch overall length, the pull suits both standard-width cabinet fronts and many drawer faces without overpowering narrower rails. The 1-1/4 inch projection allows use on doors near adjacent cabinets, because the pull extends a predictable distance into the room, helping plan clearances at corners. A 0.394 inch width keeps the handle proportional on slimmer fronts while still giving enough bar for users to grip securely during everyday cabinet use.
The defined 5 inch (128 mm) center to center spacing on this AP128-SS stainless steel pull supports repetitive drilling with standard jigs, which streamlines installation on multi-cabinet jobs. Because the material is stainless steel with a stainless steel finish, every pull in a project presents the same look and feel, which helps installers deliver uniform visual lines across banks of doors and drawers. The 6 inch length, combined with the fixed 128 mm hole spread, sets consistent end margins on each side of the mounting points, aiding visual alignment with rails and stile edges. A 1-1/4 inch projection provides a repeatable stand-off dimension, which helps align pulls vertically on tall doors without varying hand clearance. The 0.394 inch width stays the same from cabinet to cabinet, which maintains a regular handle profile and supports accurate layout when aligning multiple pulls on stacked drawers.
The AP128-SS stainless steel pull has a 5 inch (128 mm) center to center, 6 inch length, 1-1/4 inch projection, and 0.394 inch width, which defines its mounting spread and hand clearance on cabinet fronts.
The 128 mm center to center spacing on this bow pull matches a common drilling pattern, which supports the use of standard templates and consistent hole locations across multiple cabinets.
The EPCO Arch Series AP128-SS pull is made of stainless steel, which provides a solid metal grip and a consistent feel when opening and closing cabinet doors and drawers.
The AP128-SS pull has a stainless steel finish, which matches its stainless steel material and supports a uniform appearance across a run of cabinets using the same hardware.
The 1-1/4 inch projection sets the pull away from the cabinet surface, which creates space for fingers behind the handle and helps reduce contact with finished door or drawer faces.
The 0.394 inch width gives the pull a slim profile, which suits modern cabinet designs while still offering enough bar thickness for a comfortable everyday grip.
The EPCO Arch Series 5-1/16 inch (128 mm) center to center stainless steel pull AP128-SS combines a 128 mm mounting spread, 6 inch length, and 1-1/4 inch projection to support predictable cabinet layouts. Its stainless steel material and stainless steel finish provide a consistent look and feel across doors and drawers drilled on a 5 inch (128 mm) pattern. For projects built around this center to center spacing, this bow pull gives a defined geometry that aligns with standard drilling setups and delivers a uniform handle profile on every installed cabinet front.
Sold In: 1 Each