Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
BAR PULL 96MM CC STAINLESS STEEL describes a 3-3/4 inch center-to-center Amerock hollow bar pull that gives cabinets a modern linear grip while keeping measurements clear for layout. The pull length of 6-1/16 inches (154 mm) spans a bit wider than the drill spacing, which visually balances typical drawer and door fronts. A projection of 1-3/8 inches (35 mm) spaces fingers off the face, helping with a clean grab even on thicker fronts. The stainless steel material provides a solid-feeling touch point for frequent opening and closing. A stainless steel finish keeps the look consistent with other stainless details in a shop or kitchen run. The Hollow Bar Pulls Series designation groups this piece with matching sizes, which supports running the same style across varying cabinet widths.
This Amerock Corporation hollow bar pull uses a 3-3/4 inch (96 mm) center-to-center layout, which lets installers line up with common drilling patterns on many cabinet runs. The specified screw size of 8-32 x 1 inch defines the thread and length used at the mounting points, which matters when threading into standard cabinet door and drawer fronts of typical thickness. The pull projects 1-3/8 inches (35 mm) from the surface, so spacing can be planned to clear neighboring fronts in tight reveals. With a base diameter of 3/8 inch (10 mm), the footprint around each mounting hole stays compact, supporting use on narrower rails or stiles without overlapping profiled edges.
This bar pull is part of the Hollow Bar Pulls Series, which identifies it as a hollow construction stainless steel pull suited to decorative cabinet use where weight and cost are factors. The stainless steel material provides a metallic contact surface that stands up to day-to-day handling in typical woodworking and cabinet environments. Its stainless steel finish gives a consistent appearance that pairs with other stainless elements, supporting cohesive runs across kitchens, offices, or shop-built installations. The Amerock BP36800SS part number ties this specific size and finish together, which helps installers and buyers call out the exact pull when matching existing hardware on service or expansion work.
The 96 mm (3-3/4 inch) center-to-center measurement is a core dimension for this pull, because it sets the drilling pattern for repeatable installation across multiple fronts. Using the 6-1/16 inch overall length as a reference, installers can visualize how much bar extends beyond the mounting points on each side, which is useful when aligning pulls across different cabinet widths. The 1-3/8 inch projection and 1/2 inch width define the working grip zone, helping plan clearances so adjacent doors and drawers open without knuckles contacting neighboring faces. The 3/8 inch base diameter informs how much flat area is needed around each hole, so rail and stile layouts can be checked against this footprint during design or machining. With the 8-32 x 1 inch screw size specified, the mounting interface is clearly defined for standard cabinet construction, which supports consistent fastening on typical door and drawer thicknesses encountered in woodworking projects.
The BP36800SS bar pull has 3-3/4 inch (96 mm) center-to-center spacing, a 6-1/16 inch (154 mm) overall length, 1-3/8 inch (35 mm) projection, 1/2 inch (13 mm) width, and a 3/8 inch (10 mm) base diameter.
The 96 mm center-to-center spacing gives a fixed drilling pattern, which streamlines jig setup and allows consistent hole placement across multiple cabinet doors and drawers.
This Amerock pull uses stainless steel material with a stainless steel finish, providing a uniform metal appearance that coordinates with other stainless components in a project.
The hollow bar pull is specified with 8-32 x 1 inch screws, so the mounting interface matches standard cabinet hardware threading and typical door and drawer thickness ranges.
The stainless steel bar pull projects 1-3/8 inches (35 mm) from the cabinet surface, providing finger clearance and helping hands avoid rubbing the door or drawer face during use.
The 1/2 inch (13 mm) bar width creates a slim, linear profile while still offering enough surface area for a comfortable grip on cabinet doors and drawers.
The Amerock Corporation BP36800SS hollow bar pull combines a 3-3/4 inch (96 mm) center-to-center pattern with a 6-1/16 inch overall length, giving a familiar drilling layout and a modern linear look. Stainless steel material and stainless steel finish keep both touch and appearance consistent across a cabinet run. With defined dimensions for projection, width, and base diameter, this Hollow Bar Pulls Series piece fits neatly into planned rail and stile layouts. For cabinet and woodworking projects that call for a 96 mm stainless bar pull, this model from Wurth Baer Supply aligns cleanly with measured installation work.
Sold In: 1 Each