224mm Swagger Decorative Bar Pull, Slate

224mm Swagger Decorative Bar Pull For Cabinets

224mm Swagger decorative bar pull gives cabinets a straight bar grip with a defined modern line, so doors and drawers open with a familiar, comfortable handhold. Berenson Corporation produces this pull in zinc, which supports a solid-feeling handle with a consistent manufactured shape for repeatable layouts across a run of fronts. The slate finish covers that zinc body with a dark, uniform tone that visually grounds light or medium cabinet colors. With a center to center of 8-13/16 inches (224 mm), this pull fits longer cabinet fronts where a wide grip spacing keeps hands clear of the door edge. Overall length of 9-5/16 inches lets the pull visually span wider rails, tying multiple fronts together in a straight, continuous line.

Design And Dimension Details That Support Work

• Center to center of 8-13/16 inches (224 mm) sets a predictable drilling pattern, which simplifies layout when repeating the same hardware across multiple cabinet doors or wide drawers.
• Overall length of 9-5/16 inches provides extended leverage along the front, so heavier drawers or tall doors pull open with less effort and look proportionate on larger faces.
• Projection of 1-1/4 inches stands the bar off the surface enough for fingers to wrap behind, helping users grab the pull cleanly even on thicker drawer fronts or face frames.
• Width of 5/8 inch creates a slim front profile that still presents enough flat surface to feel stable in the hand, which is useful on frequently used kitchen and shop cabinetry.
• Base diameter of 1/2 inch defines a compact footprint at each mounting point, so the pull seats neatly on narrow rails without crowding edge profiles or adjacent hardware.
• Zinc material gives the pull a uniform, cast structure that works well when specifying multiple matching handles across a project that needs consistent appearance.

Installation Geometry And Cabinet Mounting Fit

Center to center spacing of 8-13/16 inches (224 mm) sets the exact hole spread, so jigs and drill patterns can be built around that fixed dimension for repeat work. The 1-1/4 inch projection keeps knuckles off the cabinet face when pulling, while still holding the bar close enough that the pull does not protrude excessively into walk paths along base cabinets. With a 5/8 inch width, the bar aligns well on standard door and drawer rails, allowing consistent vertical centering without overlapping panel bevels. The 1/2 inch base diameter keeps each contact point tight and defined, which helps the pull seat squarely on flat cabinet surfaces.

How This Berenson Swagger Pull Fits Real Jobs

Where This Slate Bar Pull Works Best

The slate finish on this Swagger pull from Berenson Corporation brings a dark, even surface that pairs cleanly with light, painted, or woodgrain cabinetry, so installers can match hardware to a broad range of door styles. As a handle within the Decorative Hardware & Moldings category, it suits residential or light commercial cabinets where visual consistency across a kitchen, bath, or shop run matters. The 9-5/16 inch length and 8-13/16 inch center to center dimension make it a practical option on wider drawers, pantry doors, or long overlay fronts where a small knob might feel undersized. Being part of the Swagger collection, this pull helps tie multiple cabinet locations together when the same line is specified throughout a project.

Details That Help Repeatable Layouts And Results

The fixed 224 mm center to center spacing allows installers to standardize drilling templates for the Swagger pull, reducing layout variation from cabinet to cabinet. With 1-1/4 inch projection, the bar stands off enough that hands can grip without scraping finished faces, which helps preserve cabinet surfaces in high-use zones. The 5/8 inch width presents a stable grip while keeping the bar visually light, supporting clean sightlines across aligned rows of drawers. A 1/2 inch base diameter concentrates the contact area, which helps each end sit flat on the cabinet face for a crisp transition between hardware and door. Zinc construction gives each pull a consistent profile, so multiple units line up evenly along long banks of cabinets.

Common Questions About The Swagger Slate Pull

Selecting This Swagger Pull For Cabinet Runs

The 224mm Swagger decorative bar pull in slate matches projects that call for a long, straight bar handle with a dark finish and defined geometry. With zinc construction, 8-13/16 inch center to center spacing, and 1-1/4 inch projection, it suits wider doors and drawers that benefit from a generous grip. For cabinet runs specified around the Swagger collection, this Berenson Corporation pull and its 9-5/16 inch overall length help keep visual lines and drilling patterns consistent from unit to unit.