Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Normandy pull is a bar-style cabinet pull that mounts on 7 inch (178 mm) centers, a spacing sized for wide drawer fronts, lower base cabinets, and tall pantry doors where a smaller pull would look undersized against the front.
The 7 inch center-to-center spacing puts this pull in the range most often specified for drawers wider than 18 inches, pot-and-pan drawers, lower base cabinet doors, and appliance-scale fronts. At these widths a shorter pull tends to disappear against the front, while a pull centered on 7 inch holes spans enough of the face to look intentional. This is also a practical replacement choice: if your existing drawer bank is already drilled on 7 inch centers, the Normandy drops onto those holes without rework. The 7-11/16 inch overall length confirms there is enough material on either side of the mounting holes to clear the edge of most standard drawer fronts.
German Bronze is a darkened, muted bronze tone with warm undertones and a depth that reads closer to an aged or oil-rubbed finish than to a bright brass. On a bar pull with a 3/4 inch section and 1-3/4 inch projection, the finish settles into the grip face without the high reflectivity of a polished surface, which keeps the hardware from competing with the cabinetry. The pull is cast in zinc, the dominant construction material in this catalog, which holds fine surface detail and provides a stable substrate for the finish over time. German Bronze coordinates within the Top Knobs Appliance Series, so companion knobs, pulls at other center-to-center values, and matching appliance-scale pieces in the same finish are available within the collection.
This pull suits kitchen designers and cabinet shops specifying hardware for transitional kitchens where the palette runs to warm, dark metals rather than bright silver or gold tones. It works equally well for contractors replacing hardware on an existing kitchen already drilled to 7 inch centers, and for homeowners reworking a lower cabinet bank or a pantry wall where the fronts are wide enough to warrant a larger pull. The transitional design language is deliberately in between traditional and contemporary, which means it does not fight with either style and can anchor a mixed hardware program alongside knobs on the doors.
The 7 inch (178 mm) center-to-center is the distance between the centers of the two mounting holes and is the number to match when replacing existing hardware or laying out new holes. The 7-11/16 inch (195 mm) overall length is the full end-to-end size of the pull, including the posts, and is a clearance and proportion figure rather than a drilling figure.
The projection is 1-3/4 inches (44 mm) from the mounting surface to the back of the grip, which leaves enough room for a full-hand grip rather than just a fingertip pull.
Yes. German Bronze is a warm, darkened bronze tone with muted reflectivity, not a bright or polished surface. It reads closer to an aged bronze than to a light gold tone.
The Top Knobs Appliance Series includes companion knobs and pulls in German Bronze, so you can run this pull on drawers and match a knob on doors within the same collection and finish.
Choose this pull when the drawer or cabinet front is wide enough that 7 inch centers are the right fit, and the finish program calls for a warm, muted bronze that settles into the cabinetry rather than sitting on top of it.
Sold In: 1 Each