Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Top Knobs M838-7 is a bar pull from the Appliance series, built for cabinet doors, wide drawer fronts, and the oversized fronts where shorter hardware looks undersized. It mounts on 7 inch (178 mm) centers and measures 9-11/16 inches overall.
Wide drawer fronts, deep base drawers, and panel-ready appliance doors all present the same problem: a shorter pull gets lost in the expanse of the front. A 7 inch center-to-center spacing addresses that directly. At this length, the pull reads as an intentional design element rather than an afterthought, and the 9-11/16 inch overall length fills a wide front the way a narrower pull simply cannot.
This is also the right spacing for a pantry door or a tall cabinet where a single pull needs to anchor the hardware program visually. In a kitchen with drawer stacks, it is common to run a 7 inch pull on the deepest base drawers while a narrower pull handles the smaller drawers above, keeping the hardware proportional to each front it mounts on.
The pull is cast in zinc and finished in Oil Rubbed Bronze, a warm, dark brown finish with bronze undertones that emerge under direct light. The hand-rubbed character of the finish means it is not uniform: it holds depth and slight variation across the surface, which distinguishes it from a flat or sprayed dark finish. Against painted cabinetry in whites, creams, and warm grays, the finish reads rich rather than heavy. Against wood tones in honey, walnut, and espresso, it reinforces the warmth already in the grain.
The transitional design style of this series means the bar form is clean enough for a contemporary space but the finish is warm enough for a traditional one, which is a useful combination when the kitchen mixes influence.
Cabinet shops specifying a full kitchen program will find the 7 inch spacing a practical complement to smaller pulls in the same Appliance series, letting the hardware scale with the drawer and door sizes rather than applying a single size across every front. Designers assembling a transitional kitchen in Oil Rubbed Bronze can draw the full Appliance collection into a consistent look across knobs, pulls, and larger hardware. Homeowners replacing existing hardware will want to confirm their wide drawers are already drilled on 7 inch (178 mm) centers before ordering, since this is not the most common residential spacing.
It is a common spacing for wide drawers and appliance-scale fronts, but less universal than 3 inch or 3-3/4 inch spacing. Measure between the centers of your existing holes before ordering if you are replacing installed hardware.
The projection is 1-7/8 inches (48 mm) from the face of the front to the back of the grip, which gives a comfortable hand clearance on a deep drawer pull.
Oil Rubbed Bronze finish names vary between manufacturers, and two brands' versions of the finish are not guaranteed to match visually. Coordinate within the Top Knobs Appliance series for a confirmed match.
The bar is 7/8 inch (22 mm) wide, giving the grip solid visual weight at this length.
When the drawer or door demands a longer pull, the 7 inch center-to-center spacing in Oil Rubbed Bronze brings both the proportion and the finish depth the front deserves.
Sold In: 1 Each