Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Aspen II pull is a contemporary bar pull for cabinet doors and drawer fronts, sized to mount on 4-inch (102 mm) centers in Brushed Satin Nickel.
The 4-inch (102 mm) center-to-center is one of the standard hole spacings drilled into frameless and face-frame cabinetry alike. On a mid-width drawer front, four inches lands close enough to center that the hardware sits in a natural grip position without feeling too wide or too narrow for the front. For a refresh project where the existing holes were drilled at four inches, this pull slots in without any new drilling. On a new build, four-inch centers work across a wide range of drawer widths, from a small spice drawer to a standard base cabinet drawer, which is why specifiers often use this spacing as their default for mid-scale fronts. At five inches overall the pull also has enough visual presence to register on a door panel without overwhelming it, making it a workable choice for upper doors as well as drawers.
The pull is zinc construction with a Brushed Satin Nickel finish. Brushed Satin Nickel sits in the silver tone family but reads warmer and quieter than polished chrome: the brushing knocks the sheen back so the surface reflects ambient light diffusely instead of throwing highlights. On a rounded bar form, that texture matters because a polished round bar can read as a bright ring against the door face, while a brushed one stays flat. The result is a finish that holds up well in high-traffic kitchens because minor scuffs and fingerprints are far less visible on a brushed surface than on a mirror polish. It also coordinates easily with brushed nickel faucets and appliance handles, which are among the most common fixture finishes in contemporary kitchens and baths.
Cabinet shops running contemporary or transitional kitchens often standardize on a single hole spacing to simplify drilling jig setups, and four-inch centers is a strong candidate for that default. This pull suits that workflow: consistent spacing, a neutral finish that works across painted and wood cabinetry, and a collection behind it that can supply companion knobs for doors on the same order. Designers specifying for a client replacing older hardware will find that four-inch centers are common enough in existing cabinetry that this pull is often a hardware-only swap. Homeowners doing a cabinet refresh can use it to update the look without touching the doors. The rounded bar edge is also a practical choice anywhere the cabinetry sees daily use, since a softer grip edge is more comfortable over time than a hard-edged squared bar.
Center-to-center is the distance between the two mounting holes, which is 4 inches (102 mm). Overall length is the end-to-end size of the pull itself, which is 5 inches (127 mm). When replacing existing hardware, match the center-to-center to your existing holes, not the overall length.
The grip has a curved cross-section rather than flat faces, so the edge that contacts the fingers is softer. On a five-inch pull used many times a day, that difference is noticeable over time.
The Aspen II collection includes coordinating knobs in the same finish and design style, so mixing pulls on drawers and knobs on doors within the same collection is straightforward.
No. Brushed Satin Nickel is a low-sheen matte-adjacent finish with a directional texture from the brushing process. Polished nickel and chrome are mirror-smooth and considerably brighter in appearance.
When four-inch centers are already in the doors and drawers, this pull makes the hardware decision simple: a rounded contemporary bar in a finish that coordinates with brushed nickel fixtures, backed by a full collection for the rest of the kitchen.
Sold In: 1 Each