Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Aspen II pull is a contemporary cabinet pull for drawer fronts and door faces, mounting on 5-inch (127 mm) centers in a Polished Nickel finish.
The 5-inch center-to-center dimension is a natural match for mid-width drawers in a base cabinet run, upper door pulls on standard 12-inch and 15-inch wide doors, and vanity drawer fronts where a 3-inch pull would feel small and a 6-inch pull would overhang. It is wide enough to grip comfortably with the whole hand and compact enough to keep visual weight in proportion on a narrower front. If the existing hole pattern in the cabinetry is drilled to 5-inch centers, this pull drops in without a bit touching the door.
The pull is cast in zinc and finished in Polished Nickel. A polished surface amplifies light rather than diffusing it, so the bar reads as a bright, continuous line across the face of the door or drawer. Polished Nickel sits in the warm-neutral zone of the silver spectrum, slightly warmer than chrome and cooler than brushed brass, which gives it a natural affinity for both cooler whites and warmer cream cabinet colors. The twig-form profile keeps the 9/16-inch bar width narrow enough to read as a detail rather than a feature.
This pull is a practical choice for designers specifying a full kitchen or bath hardware program in the Aspen II collection, cabinet shops building out contemporary slab or shaker kitchens where the hardware should be clean and bright, and homeowners replacing an existing pull drilled to 5-inch centers without touching the door. The Polished Nickel finish coordinates naturally with chrome faucets and fixtures already common in kitchens and baths, which removes the need to source a second metal tone. Because it is part of the Aspen II series, companion knobs for doors and larger pulls for wider drawers are available in the same profile and finish.
Center-to-center, 5 inches (127 mm), is the distance between the two mounting holes and is the number to match when replacing existing hardware. Overall length, 7-5/16 inches (186 mm), is the full end-to-end size of the pull including the posts, and it determines whether the pull physically clears the edge of the front.
The projection is 2-1/16 inches (52 mm), measured from the face of the front to the back of the grip.
A polished surface picks up marks more readily than a brushed or matte finish, and wipes clean just as easily. High-traffic drawers may need a quick wipe more often than a matte-finish alternative would.
Yes. The Aspen II collection includes companion knobs in the same profile and Polished Nickel finish, which is the standard way to run pulls on drawers and knobs on doors within one series.
When the hole pattern is at 5-inch centers and the finish program calls for Polished Nickel, this Aspen II pull closes the spec without compromise on proportion or surface quality.
Sold In: 1 Each