Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Hopewell bar pull is a contemporary steel bar pull for cabinet doors and drawer fronts, mounting on 6-5/16 inch (160 mm) centers in an Oil Rubbed Bronze finish.
The 6-5/16 inch center-to-center is the step up from the 128 mm spacing that dominates standard base cabinets. At this scale the pull reads as intentional hardware on a wide drawer rather than a small fitting that struggles to fill the front. It is the natural choice for a 24-inch or 30-inch drawer bank, a pot drawer, or a wide lower door where a shorter pull would look undersized. It also works on full-height pantry fronts where the pull needs enough visual weight to anchor the door. If the existing holes in a remodel or refacing project are drilled at 160 mm, this pull is a direct replacement with no new drilling required.
The Hopewell is made from steel, which is less common than the zinc alloy that makes up the majority of bar pulls in this catalog. Steel gives the bar a slightly denser feel and holds the slim 15/32 inch width without flex. The Oil Rubbed Bronze finish is a darkened, hand-rubbed bronze tone with warm brown and black variation across the surface. It is not a flat or uniform color: the rubbing process leaves it lighter on the high points and deeper in the recesses, which gives the bar some depth even though the profile itself is minimal. Against painted cabinetry the finish reads warm and grounded. Against wood tones it coordinates naturally with darker stains and with hardware in adjacent finishes like Antique Bronze or Dark Antique Copper without blending into them.
This pull suits designers and cabinet shops specifying a transitional or contemporary kitchen where the hardware carries some visual warmth without leaning into an ornate style. Oil Rubbed Bronze is a finish that works in both modern farmhouse and more traditionally inflected kitchens, which makes this pull a practical choice on a spec build where the cabinetry style may shift slightly between the design and the final install. At the 160 mm spacing it also suits bathroom vanities wider than the standard single-sink box, where a shorter pull tends to look like an afterthought. For a high-volume cabinet shop building wide drawer stacks, the Bar Pulls series provides a consistent profile across multiple center-to-center sizes, so the hardware program can stay uniform from a narrow drawer to a wide one.
Yes. 160 mm converts to approximately 6-5/16 inches, and both refer to the same center-to-center hole spacing.
No. Oil Rubbed Bronze is a hand-rubbed finish that varies across the surface, typically darker in the recesses and lighter on the raised or forward-facing areas. That variation is part of the character of the finish.
This pull is steel rather than zinc alloy. Steel is the stated material for this SKU; the finish and profile are otherwise consistent with the Bar Pulls series.
Yes. Bar pulls at this scale work on wide lower doors and full-height pantry fronts as well as drawers. The 9-1/8 inch overall length suits either application.
When the hole spacing is 160 mm and the finish needs warmth without ornamentation, this is the pull that closes the gap between a drawer that looks unfinished and one that looks deliberate.
Sold In: 1 Each